IEC-62056-61-2006.pdf
《IEC-62056-61-2006.pdf》由会员分享,可在线阅读,更多相关《IEC-62056-61-2006.pdf(44页珍藏版)》请在三一文库上搜索。
1、 INTERNATIONAL STANDARD IEC 62056-61 Second edition 2006-11 Electricity metering Data exchange for meter reading, tariff and load control Part 61: Object identification system (OBIS) Reference number IEC 62056-61:2006(E) Publication numbering As from 1 January 1997 all IEC publications are issued wi
2、th a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication i
3、ncorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this pub
4、lication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as w
5、ell as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date
6、 of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Custome
7、r Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 INTERNATIONAL STANDARD IEC 6205
8、6-61 Second edition 2006-11 Electricity metering Data exchange for meter reading, tariff and load control Part 61: Object identification system (OBIS) IEC 2006 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechani
9、cal, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch W For price,
10、 see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical Commission 2 62056-61 IEC:2006(E) CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Terms, definitions and abbreviations 8 4 OBIS structure8 4.1 General.8 4.2 Value grou
11、p A .8 4.3 Value group B .8 4.4 Value group C .8 4.5 Value group D .9 4.6 Value group E .9 4.7 Value group F9 4.8 Manufacturer specific codes9 4.9 Reserved ranges.9 4.10 Summary of rules for manufacturer, utility, consortia and country specific codes .9 5 Value group definitions.11 5.1 Value group A
12、 .11 5.2 Value group B .11 5.3 Value group C .12 5.4 Value group D .15 5.5 Value group E .20 5.6 Value group F25 5.7 Abstract objects 26 5.8 Electricity-related general purpose objects 29 5.9 List objects32 5.10 Data profile objects .32 5.11 Register table objects33 Annex A (normative) Code presenta
13、tion.34 Bibliography36 INDEX 37 Figure 1 OBIS code structure.8 Figure 2 Quadrant definitions for active and reactive power .15 Figure 3 Model of the line and the transformer for calculation of loss quantities .22 Figure A.1 Reduced ID code presentation34 Table 1 Rules for manufacturer, utility, cons
14、ortia and country specific codes .10 Table 2 Value group A codes .11 Table 3 Value group B codes .11 62056-61 IEC:2006(E) 3 Table 4 Value group C codes Abstract objects 12 Table 5 Value group C codes Electricity13 Table 6 Value group D codes Electricity15 Table 7 Value group D codes Consortia specif
15、ic identifiers .18 Table 8 Value group D codes Country specific identifiers19 Table 9 Value group E codes Tariff rates 20 Table 10 Value group E codes Harmonics.21 Table 11 Value group E codes Extended phase angle measurement.21 Table 12 Value group E codes Transformer and line loss quantities23 Tab
16、le 13 Value group E codes UNIPEDE voltage dip quantities 25 Table 14 Abstract object codes 26 Table 15 General error messages28 Table 16 General purpose codes Electricity 29 Table 17 Electricity related error messages .32 Table 18 General list objects32 Table 19 Electricity related list objects.32 T
17、able 20 Profile codes Abstract 32 Table 21 Profile codes Electricity 33 Table 22 Register table object codes Abstract 33 Table 23 Register table object codes Electricity 33 Table A.1 Example of display code replacement 34 Table A.2 Value group F Billing periods 35 4 62056-61 IEC:2006(E) INTERNATIONA
18、L ELECTROTECHNICAL COMMISSION _ ELECTRICITY METERING DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL Part 61: Object identification system (OBIS) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrote
19、chnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specificatio
20、ns, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International,
21、governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decis
22、ions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for intern
23、ational use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In ord
24、er to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be cle
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEC 62056 61 2006
链接地址:https://www.31doc.com/p-3770101.html