BS-5293-7-2001 ISO-1125-1999.pdf
《BS-5293-7-2001 ISO-1125-1999.pdf》由会员分享,可在线阅读,更多相关《BS-5293-7-2001 ISO-1125-1999.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 5293-7: 2001 ISO 1125:1999 Sampling and testing carbon black for use in the rubber industry Part 7: Method for determination of ash content (ISO title: Rubber compounding ingredients Carbon black Determination of ash) ICS 83.040.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERM
2、ITTED BY COPYRIGHT LAW Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:05:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5293-7:2001 This British Standard, having been prepared under the direction of the Sector Policy and Strategy Committee for Materials and Chemicals, was published unde
3、r the authority of the Standards Policy and Strategy Committee on 7 November 2001 BSI 7 November 2001 ISBN 0 580 38662 7 National foreword This British Standard reproduces verbatim ISO 1125:1999 and implements it as the UK national standard. It supersedes BS 5293-7:1991 which is withdrawn. The UK pa
4、rticipation in its preparation was entrusted to Technical Committee PRI/50, Natural and synthetic rubbers, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement intern
5、ational or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to inclu
6、de all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/Europe
7、an committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, ISO title page, page ii
8、, pages 1 to 4, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. DateComments Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:05:26 GMT+00:00 2006, Uncontrolled
9、 Copy, (c) BSI A Reference number ISO 1125:1999(E) INTERNATIONAL STANDARD ISO 1125 Third edition 1999-03-15 Rubber compounding ingredients Carbon black Determination of ash Ingrdients de mlange du caoutchouc Noir de carbone Dtermination du taux de cendres 9991:73925 SBBS 52937:2001 Licensed Copy: sh
10、effieldun sheffieldun, na, Mon Dec 04 16:05:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ISO 1125:1999(E) OSI 9991 All irthgs serevr.de lnUess toiwrehse scepifi,de trap on fo this lbupictaino may eb cudorperde tu roziliyna ni de foyb ro mr yna snaem, celetrcino cem rocinaha,l cniltohp gniducoypogni
11、 dna .rehsilbup eht morf gnitirw ni noissimrep tuohtiw ,mliforcim noitazidradnatS rof noitazinagrO lanoitanretnI 65 elatsop esaC 02 evneG 1121-HC dnalreztiwS tenretnIhc.osiosi dnalreztiwS ni detnirP ii Foreword ISO (the International Organization for Standardization) is a worldwide federation of nat
12、ional standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Interna
13、tional organizations, governmental and non- governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical comm
14、ittees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 1125 was prepared by Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 3, Raw ma
15、terials (including latex) for use in the rubber industry. This third edition cancels and replaces the second edition (ISO 1125:1990), which has have been technically revised. 9991:73925 SBBS 52937:2001 Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:05:26 GMT+00:00 2006, Uncontrolled Copy,
16、 (c) BSI DRADNATS LANOITANRETNI OSI)E(9991:5211 OSI 1 Rubber compounding ingredients Carbon black Determination of ash WARNING Persons using this International Standard should be familiar with normal laboratory practice. This standard does not purport to address all of the safety problems, if any, a
17、ssociated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions. 1 Scope This International Standard specifies a method for determining the ash of all types of carbon black for use in t
18、he rubber industry. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agre
19、ements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 1124:1988, Rubber compounding ingredients Carbon
20、black shipment sampling procedures. ISO/TR 9272:1986, Rubber and rubber products Determination of precision for test method standards. 3 Principle An accurately weighed portion of dried sample is ignited in a crucible until all the carbonaceous material is oxidized. The crucible is cooled in a desic
21、cator, weighed, and the percentage of ash calculated. 4 Apparatus 4.1 Muffle furnace, capable of maintaining a temperature of 550 C 25 C (or other required temperature). NOTE The use of a vented furnace would decrease the time of heating to constant mass (see 6.3). 4.2 Porcelain crucible, tall form,
22、 diameter 35 mm, height 30 mm, with lid. The use of the lid on the crucible is optional. If it is not used, this shall be mentioned in the test report. 4.3 Analytical balance, accurate to 0,1 mg. 9991:73925 SBBS 52937:2001 Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:05:26 GMT+00:00 200
23、6, Uncontrolled Copy, (c) BSI ISO 1125:1999(E) ISO 2 4.4 Desiccator. 4.5 Oven, preferably of the gravity-convection type, capable of temperature regulation to within 1 C at 125 C and temperature uniformity to within 5 C. 5 Sampling Carry out sampling in accordance with ISO 1124. 6 Procedure 6.1 Heat
24、 the crucible (4.2), with its lid (if used), in the muffle furnace (4.1) at a temperature of 550 C 25 C for 1 h. Place the crucible (and lid) in the desiccator (4.4). Cool to ambient temperature and reweigh to the nearest 0,1 mg. NOTE If, after cleaning, drying and reweighing at the end of the deter
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-5293-7-2001 ISO-1125-1999 BS 5293 2001 ISO 1125 1999
链接地址:https://www.31doc.com/p-3770104.html