IEC-TR-61010-3-2003.pdf
《IEC-TR-61010-3-2003.pdf》由会员分享,可在线阅读,更多相关《IEC-TR-61010-3-2003.pdf(20页珍藏版)》请在三一文库上搜索。
1、TECHNICAL REPORT IEC TR 61010-3 Second edition 2003-04 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition series Rgles de scurit pour appareils lectriques de m
2、esurage, de rgulation et de laboratoire Partie 3: Protocole pour llaboration des rapports de vrification de la conformit de la srie de publications 61010 de deuxime dition Reference number IEC/TR 61010-3:2003(E) Publication numbering As from 1 January 1997 all IEC publications are issued with a desi
3、gnation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporat
4、ing amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication,
5、 including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as th
6、e list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (http:/www.iec.ch/searchpub/cur_fut.htm) enables you to search by a variety of criteria including text searches, technical committees
7、 and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (http:/www.iec.ch/online_news/ justpub/jp_entry.htm) is also available by email
8、. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 TEC
9、HNICAL REPORT IEC TR 61010-3 Second edition 2003-04 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition series Rgles de scurit pour appareils lectriques de mesu
10、rage, de rgulation et de laboratoire Partie 3: Protocole pour llaboration des rapports de vrification de la conformit de la srie de publications 61010 de deuxime dition PRICE CODE IEC 2003 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any
11、 means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch
12、 Web: www.iec.ch M For price, see current catalogue Commission Electrotechnique Internationale International Electrotechnical Commission 2 TR 61010-3 IEC:2003(E) CONTENTS FOREWORD 3 1Scope 5 2General . 5 3Applicability of conformity verification reports 5 4Documents 6 5Completion of the report 6 Ann
13、ex A (Informative) Summary of tests 10 TR 61010-3 IEC:2003(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition
14、series FOREWORD 1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardizat
15、ion in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. I
16、nternational, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2)
17、The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3)The documents produced have the form of recom
18、mendations for international use and are published in the form of standards, technical specifications, technical reports or guides and they are accepted by the National Committees in that sense. 4)In order to promote international unification, IEC National Committees undertake to apply IEC Internati
19、onal Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5)The IEC provides no marking procedure to indicate its approval
20、 and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards. 6)Attention is drawn to the possibility that some of the elements of this Technical Report may be the subject of patent rights. The IEC shall not be held responsible for identifying any or a
21、ll such patent rights. The main task of IEC technical committees is to prepare International Standards. However, a technical committee may propose the publication of a technical report when it has collected data of a different kind from that which is normally published as an International Standard,
22、for example “state of the art“. IEC 61010-3, which is a technical report, has been prepared by technical committee 66: Safety of measuring, control, and laboratory equipment. The text of this technical report is based on the following documents: Enquiry draftReport on voting 66/275/DTR66/302/RVC Ful
23、l information on the voting for the approval of this technical report can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This report is a Technical Report and is of a purely informative nature and is
24、 therefore by itself not to be regarded as an International Standard. 4 TR 61010-3 IEC:2003(E) The committee has decided that the contents of this publication will remain unchanged until 2008. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition; amended. TR 61
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEC TR 61010 2003
链接地址:https://www.31doc.com/p-3770392.html