IEC-TR-61926-1-1-1999.pdf
《IEC-TR-61926-1-1-1999.pdf》由会员分享,可在线阅读,更多相关《IEC-TR-61926-1-1-1999.pdf(52页珍藏版)》请在三一文库上搜索。
1、TECHNICAL REPORT IEC TR 61926-1-1 First edition 1999-10 Design automation Part 1-1: Harmonization of ATLAS test languages Automatisation de la conception Partie 1-1: Harmonisation de langages dessais ATLAS Reference number IEC/TR 61926-1-1:1999(E) Copyright International Electrotechnical Commission
2、Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 22:34:07 MSTNo reproduction or networking permitted without license from IHS -,-,- Numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 se
3、ries. Consolidated publications Consolidated versions of some IEC publications including amendments are available. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendme
4、nts 1 and 2. Validity of this publication The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to the date of the reconfirmation of the publication is available in the IEC catalogue. Infor
5、mation on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is to be found at the following IEC sources: IEC web site* Catalogue of IEC publications Published yearly with regula
6、r updates (On-line catalogue)* IEC Bulletin Available both at the IEC web site* and as a printed periodical Terminology, graphical and letter symbols For general terminology, readers are referred to IEC 60050: International Electrotechnical Vocabulary (IEV). For graphical symbols, and letter symbols
7、 and signs approved by the IEC for general use, readers are referred to publications IEC 60027: Letter symbols to be used in electrical technology, IEC 60417: Graphical symbols for use on equipment. Index, survey and compilation of the single sheets and IEC 60617: Graphical symbols for diagrams. * S
8、ee web site address on title page. Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 22:34:07 MSTNo reproduction or networking permitted without license from IHS -,-,- TECHNICAL RE
9、PORT IEC TR 61926-1-1 First edition 1999-10 Design automation Part 1-1: Harmonization of ATLAS test languages Automatisation de la conception Partie 1-1: Harmonisation de langages dessais ATLAS PRICE CODE IEC 1999 Copyright - all rights reserved No part of this publication may be reproduced or utili
10、zed in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission3, rue de Varemb Geneva, Switzerland Telefax: +41 22 919 0300e-mail: inmailiec.ch IEC web site http:/www.iec.ch
11、S For price, see current catalogue Commission Electrotechnique Internationale International Electrotechnical Commission Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 22:34:07 M
12、STNo reproduction or networking permitted without license from IHS -,-,- 2 TR 61926-1-1 IEC:1999(E) CONTENTS Page FOREWORD 3 OVERVIEW 4 INTRODUCTION 13 Clause 1Scope 14 2Reference documents 14 3Definitions 14 4Symbols and abbreviations. 15 5Background information and history 15 6Relationship between
13、 C/ATLAS and ATLAS 16 7Current events . 17 8Implementations of ATLAS and C/ATLAS . 18 9Harmonization methods 18 10Conclusions . 22 11Recommendations . 23 12Benefits . 23 13Other languages and/or implementations 24 Annex A (informative) Comparisons of 416, 716, and 626 definitions 1984 to 1995. 25 Bi
14、bliography . 45 Copyright International Electrotechnical Commission Provided by IHS under license with IECLicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/09/2007 22:34:07 MSTNo reproduction or networking permitted without license from IHS -,-,- TR 61926-1-1 IEC:1999(E) 3 INTE
15、RNATIONAL ELECTROTECHNICAL COMMISSION _ DESIGN AUTOMATION Part 1-1: Harmonization of ATLAS test languages FOREWORD 1)The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The
16、object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC
17、National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardiz
18、ation (ISO) in accordance with conditions determined by agreement between the two organizations. 2)The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has repr
19、esentation from all interested National Committees. 3)The documents produced have the form of recommendations for international use and are published in the form of standards, technical specifications, technical reports or guides and they are accepted by the National Committees in that sense. 4)In o
20、rder to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall b
21、e clearly indicated in the latter. 5)The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards. 6) Attention is drawn to the possibility that some of the elements of this technical report
22、 may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. However, a technical committee may propose the publication of a technical report when it has col
23、lected data of a different kind from that which is normally published as an International Standard, for example “state of the art“. Technical reports do not necessarily have to be reviewed until the data they provide are considered to be no longer valid or useful by the maintenance team. IEC 61926-1
24、-1, which is a technical report, has been prepared by IEC technical committee 93: Design automation. The text of this technical report is based on the following documents: Enquiry draftReport on voting 93/93/CDV93/102/RVC Full information on the voting for the approval of this technical report can b
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEC TR 61926 1999
链接地址:https://www.31doc.com/p-3770585.html