BS-5511-1977.pdf
《BS-5511-1977.pdf》由会员分享,可在线阅读,更多相关《BS-5511-1977.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 5511:1977 Incorporating Amendment No. 1 Size designation of clothes Definitions and body measurement procedure UDC 687.021:006.78 Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:59:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5511:1977 This British Standard, having
2、been prepared under the direction of the Clothing Standards Committee, was published under the authority of the Executive Board on 30 September 1977 BSI 07-1999 The following BSI references relate to the work on this standard: Committee reference CLT/1 Draft for comment 74/35787 DC ISBN 0 580 09925
3、3 Cooperating organizations The Clothing Standards Committee, under whose direction this British Standard was prepared, consists of representatives from the following Government departments and scientific and industrial organizations: Apparel and Fashion Industrys Association* British Footwear Manuf
4、acturers Federation British Man-made Fibres Federation British Railways Board British Textile Employers Association Clothing Institute* Clothing Manufacturers Federation* Consumer Standards Advisory Committee of BSI* Consumers Association Limited* Department of Industry* Drapers Chamber of Trade* Kn
5、itting Industries Federation* Mail Order Traders Association* Ministry of Defence Multiple Shops Federation* National Childrens Wear Association* Retail Trading Standards Association Incorporated Shoe and Allied Trades Research Association Textile and Clothing Contractors Association Textile Researc
6、h Council The organizations marked with an asterisk in the above list, together with the following, were directly represented on the committee entrusted with the preparation of this British Standard: British Mantle Manufacturers Association Metrication Board Retail Distributors Association Incorpora
7、ted Shirt, Collar and Tie Manufacturers Federation Amendments issued since publication Amd. No.Date of issueComments 3328July 1980Indicated by a sideline in the margin Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:59:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5511:1977 BSI 07-1999i
8、 Contents Page Cooperating organizationsInside front cover Forewordii 0Introduction 1 1Scope and field of application1 2Definitions1 3Measurement of body dimensions5 Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:59:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5511:1977 ii BSI 07-1999
9、 Foreword This British Standard has been prepared under the direction of the Clothing Standards Committee. It was first published in 1977 as a dual-numbered standard, identical with the 1977 edition of ISO 3635 “Size designation of clothes Definitions and body measurement procedure”, published by th
10、e International Organization for Standardization (ISO). The second edition of ISO 3635, published in 1979 and which differed from the 1977 edition, was not approved by the UK and consequently the dual identity of the British Standard could not be maintained. Amendment No. 1 to BS 5511 was therefore
11、issued to effect the change. Terminology and conventions. For ease of production, the text of the 1977 edition of ISO 3635 has been used for the basis of this British Standard. Some terminology and certain conventions are not identical with those used in British Standards; attention is especially dr
12、awn to the following. Wherever the words “International Standard” appear, referring to this standard, they should be read as “British Standard”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct app
13、lication. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 5 and a back cover. This standard has been updated (see copyright date) and may have had a
14、mendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:59:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5511:1977 BSI 07-19991 0 Introduction In the size designation of clothes, certain measurement
15、s have been so prescribed that, when taken in accordance with a standard procedure using standard terms and definitions, they will define a body size. This body size is shown on the label, on the swing ticket, or on both, so that the correct selection of a garment may be made according to the approp
16、riate personal measurements, irrespective of current fashion or garment style. This International Standard is intended as a reference document to be consulted in conjunction with the International Standard for the size designation of clothes applicable to the garment under consideration. 1 Scope and
17、 field of application This International Standard defines body dimensions and specifies a standard procedure for measuring the body. 2 Definitions For the purposes of this International Standard, the following definitions shall apply: 2.1 control dimensions those body measurements, in centimetres, o
18、n which a sizing system is built, and that are used to assign an appropriately sized garment to a wearer 2.2 standard pictogram a pictorial symbol used to indicate the position on the body of the relevant control dimensions 2.3 special pictogram a pictorial symbol representing the upper part of the
19、standard pictogram and on which the position of the breasts is indicated by two inverted arcs and which is used specifically to indicate the position of the underbust girth control dimension NOTE 1The Standard pictogram and the special pictogram are shown below in their basic forms, i.e. without the
20、 numerals used for labelling. For uniformity of presentation, girth measurements should be shown on the left-hand side and length measurements on the right-hand side of pictograms. NOTE 2The minimum size of the pictogram is not specified but it should be large enough to convey immediate understandin
21、g and to allow the use of readily legible numerals. NOTE 3The recommended type for use on pictograms is UNIVERS No. U-59, as used in the relevant size designation International Standards. Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:59:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 55
22、11:1977 2 BSI 07-1999 DefinitionPictogramMeasuring position 2.4 head girth the maximum horizontal girth of the head measured above the ears 2.5 neck girth the girth of the neck measured with the tape-measure passed 2 cm below the Adams apple and at the level of the 7th cervical vertebra Licensed Cop
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS 5511 1977
链接地址:https://www.31doc.com/p-3770588.html