BS-6050-1981 ISO-4232-2-1980.pdf
《BS-6050-1981 ISO-4232-2-1980.pdf》由会员分享,可在线阅读,更多相关《BS-6050-1981 ISO-4232-2-1980.pdf(10页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 6050:1981 ISO 4232-2: 1980 Specification for Minimum information to be included in specification sheets of document copying machines ISO title: Office machines Minimum information to be included in specifications sheets Part 2: Document copying machines UDC 681.621.23.004.11 Lice
2、nsed Copy: sheffieldun sheffieldun, na, Tue Dec 05 10:17:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6050:1981 This British Standard, having been prepared under the direction of the Office Machines and Equipment Standards Committee, was published under the authority of the Executive Board and c
3、omes into effect on 31 March 1981 BSI 12-1999 The following BSI references relate to the work on this standard: Committee reference OMS/3 Draft for comment 78/65736 DC ISBN 0 580 11827 4 Cooperating organizations The Office Machines and Equipment Standards Committee, under whose direction this Briti
4、sh Standard was prepared, consists of representatives from the following: British Printing Industries Federation* Business Equipment Trade Association* Civil Service Department* Committee of London Clearing Bankers on behalf of the Committee of Scottish Clearing Bankers, Cooperative Bank, Central Tr
5、ustee Savings Bank and Yorkshire Bank* Drawing Office Material Manufacturers and Dealers Association Her Majestys Stationery Office* Institute of Administrative Management* Institute of Chartered Accountants in England and Wales Institute of Chartered Secretaries and Administrators* National Economi
6、c Development Office Office Machines and Equipment Federation* The organizations marked with an asterisk in the above list, together with the following, were directly represented on the Technical Committee entrusted with the preparation of this British Standard: Association of County Councils Britis
7、h Paper and Board Industry Federation (PIF) British Photographic Association British Railways Board Building Societies Association Greater London Council Library Association National Coal Board Post Office Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: sheffieldun s
8、heffieldun, na, Tue Dec 05 10:17:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6050:1981 BSI 12-1999i Contents Page Cooperating organizationsInside front cover National forewordii 0Introduction1 1Scope and field of application1 2Reference1 3Arrangement of the information1 4Information to be inclu
9、ded in specification sheets1 Table Minimum information to be included in specification sheets1 Publication referred toInside back cover Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 10:17:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6050:1981 ii BSI 12-1999 National foreword This Britis
10、h Standard has been prepared under the direction of the Office Machines and Equipment Standards Committee and is identical with ISO 4232-2 “Office machines Minimum information to be included in specifications sheets Part 2: Document copying machines” published in 1980 by the International Organizati
11、on for Standardization (ISO). Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a British Standard without deviation. Some terminology and certain conventions are not identical with those used in British Standards; attention is espec
12、ially drawn to the following. Wherever the words “International Standard” appear, referring to this standard, they should be read as “British Standard”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their cor
13、rect application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-reference International StandardCorresponding British Standard ISO 3066:1974BS 4588:1970 Methods of test for determining the registration obtained on duplicating machines (Technicall
14、y equivalent) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment tabl
15、e on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 10:17:24 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6050:1981 BSI 12-19991 0 Introduction Document copying machines of many different types and capacities are now available and their specifications vary so widely
16、that it is often difficult for potential users to assess which machine(s) might best meet their requirements. 1 Scope and field of application This International Standard specifies the minimum information that shall be included in the specification sheets of document copying machines so that users m
17、ay compare directly the characteristics of different machines. It does not apply to microcopying equipment. 2 Reference ISO 3066, Duplicating machines Registration. 3 Arrangement of the information In order to comply with this International Standard, specification sheets shall contain, in the order
18、shown, all items listed in clause 4 below which are relevant to the machine being described. Additional points may be included under items 1 to 8, if appropriate. This information shall be given before any other data, and it is important that the numbers and headings for the main sections (for examp
19、le 2 Performance data) should be shown, although numbers identifying sub-sections such as 2.1 and 2.2 may be omitted. Where grammage (g/m2) data is given, it is assumed that the paper has been conditioned in the standard atmosphere defined in ISO 3066, i.e. at a temperature and relative humidity of
20、20 2 C and 65 5 % respectively. The minimum information given in 3.2.1 and 3.2.4 is for an original without the need for a supporting sheet. A note shall be included near the heading of the specification sheet to indicate that it has been drawn up in accordance with this International Standard. 4 In
21、formation to be included in specification sheets The following items comprise the minimum information that shall be included in the specification sheets of document copying machines: Table Minimum information to be included in specification sheets Numerical sequence Required informationIndication or
22、 value 1General data 1.1Machine name and model 1.2Type (state if fixed console, mobile console, table-top, etc.) 1.3Process employed (state if wet or dry) 2Performance data 2.1Initial warm-up time 2.2First copy out after warm-up time 2.3Average number of A4 copies per minute, from one original, excl
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-6050-1981 ISO-4232-2-1980 BS 6050 1981 ISO 4232 1980
链接地址:https://www.31doc.com/p-3770666.html