BS-6058-1989 EN-60613-1990 IEC-60613-1989.pdf
《BS-6058-1989 EN-60613-1990 IEC-60613-1989.pdf》由会员分享,可在线阅读,更多相关《BS-6058-1989 EN-60613-1990 IEC-60613-1989.pdf(18页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 6058:1989 EN 60613: 1990 IEC 613:1989 Incorporating Amendment No. 1 Method of Specifying and verifying the characteristics of rotating anode X-ray tubes and X-ray tube assemblies used in medical diagnosis This European Standard EN 60613:1990 has the status of a British Standard L
2、icensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 01:26:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6058:1989 This British Standard, having been prepared under the direction of the Health Care Standards Policy Committee, was published under the authority of the Board of BSI and comes into e
3、ffect on 30 March 1990 BSI 12-1999 First published January 1981 Second edition March 1990 The following BSI references relate to the work on this standard: Committee reference HCC/71 Draft for comment 87/52124 DC ISBN 0 580 18078 6 Committees responsible for this British Standard The preparation of
4、this British Standard was entrusted by the Health Care Standards Policy Committee (HCC/-) to Technical Committee HCC/71, upon which the following bodies were represented: Association of X-ray Equipment Manufacturers (BEAMA Ltd.) British Institute of Radiology College of Radiographers Department of H
5、ealth Institute of Physical Sciences in Medicine (IPSM) Society of X-ray Technology Amendments issued since publication Amd. No.Date of issueComments 6761September 1991 Indicated by a sideline in the margin Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 01:26:53 GMT+00:00 2006, Uncontrolled
6、Copy, (c) BSI BS 6058:1989 BSI 12-1999i Contents Page Committees responsibleInside front cover National forewordii Foreword2 Text of EN 606133 Publications referred toInside back cover Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 01:26:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6058:
7、1989 ii BSI 12-1999 National foreword This British Standard has been prepared under the direction of the Health Care Standards Policy Committee and is identical with IEC 613:1989 “Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis”, published by the I
8、nternational Electrotechnical Commission (IEC). In 1990 the European Committee for Electrotechnical Standardization (CENELEC) accepted IEC 613:1989 as European Standard EN 60613:1990. This revision of BS 6058 differs from the 1981 edition in that a method for determining loading time has been introd
9、uced, the method for determining decreasing input power ratings has been deleted, the method for testing single load ratings has been relocated to an annex that gives guidance, and the definitions of many of the terms used in the standard have been taken from BS 6641:1985. On publication of this sta
10、ndard BS 6058:1981 is withdrawn. Textual error. When adopting the text of the International Standard, the textual error given below was discovered. It has been marked in the text and has been reported to IEC in a proposal to amend the text of the International Standard. In 9.1.4, line 3 the date of
11、IEC 613 is given incorrectly as 1988. The correct date of publication is 1989. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself co
12、nfer immunity from legal obligations. Cross-references International StandardCorresponding British Standard BS 5724 Medical electrical equipment IEC 601-1:1988Part 1:1989 Specification for general safety requirements (Identical) IEC 601-2-7:1987Section 2.7:1987 Specification for high-voltage generat
13、ors of diagnostic X-ray generators (Identical) IEC 788:1984BS 6641:1985 Glossary of medical radiology terms (Identical) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 12, an inside back cover and a back cover. This standar
14、d has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 01:26:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EURO
15、PISCHE NORM EN 60613 December 1990 UDC 615.849.114:616-073.75:621.386.2 Descriptors: Medical electrical equipment, X-ray equipment, radiodiagnostic X-ray generator, high voltage generators, X-ray tube assemblies, rotating anode X-ray tubes, definitions, electrical characteristics, thermal characteri
16、stics English version Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis (IEC 613:1989) Caractristiques lectriques, thermiques et de charge des tubes radiognes anode tournante pour diagnostic mdical (CEI 613:1989) Elektrische, thermische und Belastung
17、s- Kennwerte von Drehanoden-Rntgenrhren fr die medizinische Diagnostik (IEC 613:1989) This European Standard was approved by CENELEC on 11 September 1990. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard th
18、e status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, Ge
19、rman). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmar
20、k, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxemburg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnis
21、che Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1990 Copyright reserved to CENELEC members Ref. No. EN 60613:1990 E Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 01:26:53 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 60613:1990 BSI 12-1999 2 Foreword The CENELEC questio
22、nnaire procedure, performed for finding out whether or not the International Standard IEC 613:1989 could be accepted without textual changes, has shown that no CENELEC common modifications were necessary for the acceptance as European Standard. The reference document was submitted to the CENELEC mem
23、bers for formal vote and was approved by CENELEC as EN 60613 on 11 September 1990. The following dates were fixed: Annex designated “normative” is part of the body of the standard. In this standard, Annex ZA is normative. For products which have complied with the relevant national standard before 19
24、91-06-15, as shown by the manufacturer or by a certification body, this previous standard may continue to apply for production until 1996-06-15. Endorsement notice The text of the International Standard IEC 613:1989 was approved by CENELEC as a European Standard without any modification. Contents Pa
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-6058-1989 EN-60613-1990 IEC-60613-1989 BS 6058 1989 EN 60613 1990 IEC
链接地址:https://www.31doc.com/p-3770699.html