IEEE-1474.3-2008.pdf
《IEEE-1474.3-2008.pdf》由会员分享,可在线阅读,更多相关《IEEE-1474.3-2008.pdf(129页珍藏版)》请在三一文库上搜索。
1、IEEE Std 1474.3-2008 IEEE Recommended Practice for Communications-Based Train Control (CBTC) System Design and Functional Allocations IEEE 3 Park Avenue New York, NY 10016-5997, USA 3 September 2008 IEEE Vehicular Technology Society Sponsored by the Rail Transit Vehicle Interface Standards Committee
2、 1474.3 TM Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=Japan, IHS Not for Resale, 10/26/2008 01:56:02 MDTNo reproduction or networking permitted without license from IHS -,-,- Copyright The Insti
3、tute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=Japan, IHS Not for Resale, 10/26/2008 01:56:02 MDTNo reproduction or networking permitted without license from IHS -,-,- IEEE Std 1474.3TM-2008 IEEE Recommended Practice
4、for Communications-Based Train Control (CBTC) System Design and Functional Allocations Sponsor IEEE Rail Transit Vehicle Interface Standards Committee of the IEEE Vehicular Technology Society Approved 12 June 2008 IEEE-SA Standards Board Copyright The Institute of Electrical and Electronics Engineer
5、s, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=Japan, IHS Not for Resale, 10/26/2008 01:56:02 MDTNo reproduction or networking permitted without license from IHS -,-,- Abstract: This recommended practice for communications-based train control (CBTC) system des
6、ign and functional allocations builds on IEEE Std 1474.1 by decomposing each identified automatic train protection, automatic train operation and automatic train supervision function to a level where each subfunction can be allocated to one of the CBTC subsystems. Keywords: automation, communication
7、, signaling, train control, function The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2008 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 3 September 2008. Printed in the United States of
8、America. IEEE and 802 are registered trademarks in the U.S. Patent +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Copyright The Institute of Electrical and Electronics Engineers,
9、Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=Japan, IHS Not for Resale, 10/26/2008 01:56:02 MDTNo reproduction or networking permitted without license from IHS -,-,- iv Copyright 2008 IEEE. All rights reserved. Introduction This introduction is not part of IEEE
10、 Std 1474.3-2008, IEEE Recommended Practice for Communications- Based Train Control (CBTC) System Design and Functional Allocations. IEEE Std 1474.1-2004 establishes performance and functional requirements for communications-based train control (CBTC) systems. Although there could be many possible s
11、ystem designs to achieve these performance and functional requirements, the current state-of-the-art and industry trends reflect that in many areas there is a preferred approach to allocating the functional requirements to the individual CBTC subsystems. This recommended practice for CBTC system des
12、ign and functional allocations documents these preferred approaches as current best industry practice. In those areas where there are no clear-cut recommendations, alternative approaches may be described. In such cases, however, it is not the intent to provide any recommendation or guide as to which
13、 alternative approach should be selected for a specific application. This decision would typically be made by the CBTC system supplier, in association with the authority having jurisdiction. The approach adopted in this recommended practice is to build on IEEE Std 1474.1-2004 by decomposing each ide
14、ntified automatic train protection, automatic train operation, and automatic train supervision function to a level where each subfunction can be allocated to one of the CBTC subsystems. In addition to capturing best industry practice, this recommended practice is intended to be of value in providing
15、 a means for interested parties to gain a better understanding of CBTC system architectures and principles of operation. Notice to users Laws and regulations Users of these documents should consult all applicable laws and regulations. Compliance with the provisions of this standard does not imply co
16、mpliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these d
17、ocuments may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self- regulation, standardization, and the promot
18、ion of engineering practices and methods. By making this document available for use and adoption by public authorities and private users, the IEEE does not waive any rights in copyright to this document. Updating of IEEE documents Users of IEEE standards should be aware that these documents may be s
19、uperseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then
20、 in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=Japan, IHS No
21、t for Resale, 10/26/2008 01:56:02 MDTNo reproduction or networking permitted without license from IHS -,-,- v Copyright 2008 IEEE. All rights reserved. amendments, corrigenda, or errata, visit the IEEE Standards Association Web site at http:/ieeexplore.ieee.org/xpl/standards.jsp, or contact the IEEE
22、 at the address listed previously. For more information about the IEEE Standards Association or the IEEE standards development process, visit the IEEE-SA Web site at http:/standards.ieee.org. Errata Errata, if any, for this and all other standards can be accessed at the following URL: http:/standard
23、s.ieee.org/reading/ieee/updates/errata/. Users are encouraged to check this URL for errata periodically. Interpretations Current interpretations can be accessed at the following URL: http:/standards.ieee.org/reading/ieee/interp/. Patents Attention is called to the possibility that implementation of
24、this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. A patent holder or patent applicant has filed a statement of assurance that it will
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEEE 1474.3 2008
链接地址:https://www.31doc.com/p-3770850.html