IEEE-664-1993-R2007.pdf
《IEEE-664-1993-R2007.pdf》由会员分享,可在线阅读,更多相关《IEEE-664-1993-R2007.pdf(23页珍藏版)》请在三一文库上搜索。
1、The Institute of Electrical and Electronics Engineers, Inc. 345 East 47th Street, New York, NY 10017-2394, USA Copyright 1993 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 1993. Printed in the United States of America ISBN 1-55937-366-0 No part of this
2、 publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. IEEE Std 664-1993 (R2007) (Revision of IEEE Std 664-1980) IEEE Guide for Laboratory Measurement of the Power Dissipation Characteristics of Aeolian Vibra
3、tion Dampers for Single Conductors Sponsor Transmission and Distribution Committee of the IEEE Power Engineering Society Reaffirmed September 26, 2007 Approved September 15, 1993 IEEE Standards Board Abstract: The current methodologies, including apparatus, procedures, and measurement accura- cies,
4、for determining the dynamic characteristics of vibration dampers and damping systems are described. Some basic guidance is provided regarding a given methods strengths and weakness- es. The methodologies and procedures described are applicable to indoor testing only. Keywords: aeolian, decay method,
5、 forced response method, inverse standing wave ratio (ISWR) method, overhead conductors, power dissipation characteristics, power method, vibration dampers Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001,
6、User=Japan, IHS Not for Resale, 07/30/2008 01:45:28 MDTNo reproduction or networking permitted without license from IHS -,-,- IEEE Standards documents are developed within the Technical Committees of the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Board. Members of
7、 the committees serve voluntarily and without compensation. They are not necessarily members of the Institute. The standards developed within IEEE represent a consensus of the broad expertise on the subject within the Institute as well as those activities outside of IEEE that have expressed an inter
8、est in partici- pating in the development of the standard. Use of an IEEE Standard is wholly voluntary. The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, mar- ket, or provide other goods and services related to the scope of the IEEE St
9、andard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and com- ments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revi
10、sion or reaffirmation. When a document is more than five years old and has not been reaffirmed, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest editio
11、n of any IEEE Standard. Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership affiliation with IEEE. Suggestions for changes in docu- ments should be in the form of a proposed change of text, together with appropriate supporting comments. Interpretat
12、ions: Occasionally questions may arise regarding the meaning of portions of standards as they relate to specific applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepare appro- priate responses. Since IEEE Standards represent
13、a consensus of all concerned inter- ests, it is important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason IEEE and the members of its technical com- mittees are not able to provide an instant response to interpretation requests except in
14、 those cases where the matter has previously received formal consideration. Comments on standards and requests for interpretations should be addressed to: Secretary, IEEE Standards Board 445 Hoes Lane P.O. Box 1331 Piscataway, NJ 08855-1331 USA IEEE Standards documents are adopted by the Institute o
15、f Electrical and Electronics Engineers without regard to whether their adoption may involve patents on articles, materials, or processes. Such adoption does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the standards documents. Copyright
16、 The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=Japan, IHS Not for Resale, 07/30/2008 01:45:28 MDTNo reproduction or networking permitted without license from IHS -,-,- iii Introduction (This introduction is
17、not a part of IEEE Std 664-1993, IEEE Guide for Laboratory Measurement of the Power Dissipa- tion Characteristics of Aeolian Vibration Dampers for Single Conductors.) This guide describes current methodologies for the testing of vibration dampers in the laboratory. Included within the scope are spec
18、ific descriptions of the apparatus, procedures, and measurement accuracies for the testing of vibration dampers. At the time this guide was completed, the Working Group on Overhead Conductor Dynamics had the follow- ing membership: Dale Douglass, ChairJohn Torok, Vice Chair Thomas J. AldertonClaude
19、HardyJerry Reding James E. ApplequistD. G. HavardA. S. Richardson E. H. BennettJ. H. MalloryNeil P. Schmidt W. L. CalhounA. R. McCullochTapani O. Seppa Dennis DossMaurice MurphyPaul Springer Ed DziedzicRon OedemannKen W. Steele John E. FlynnM. A. PashaDavid Sunkle Tin FongJ. C. PohlmanJ. Ridley Thra
20、sh Kenneth GriffingDouglass O. ProctorH. Brian White Peter HagerdornP. D. QuinnWilliam Zollars C. B. Rawlins At the time this guide was completed, the Task Group on the Revision of IEEE Std 664 had the following membership: John Torok, Chair Dale DouglassA. S. RichardsonPaul Springer Denis NoiseuxDa
21、vid Sunkle The following persons were on the balloting committee: James E. ApplequistGeorge G. KaradyR. J. Piwko James J. BurkeNestor KolcioJ. Poffenberger Vernon L. ChartierThomas J. McDermottW. Edward Reid Dale DouglassFranklin D. MyersDennis Reisinger Edwin J. “Tip” GoodwinG. B. NilesNeil P. Schm
22、idt I. S. GrantStig L. NilssonB. R. Shperling J. G. KappenmanJ. M. Van Name Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=Japan, IHS Not for Resale, 07/30/2008 01:45:28 MDTNo reproduction or networ
23、king permitted without license from IHS -,-,- iv When the IEEE Standards Board approved this standard on September 15, 1993, it had the following membership: Wallace S. Read, ChairDonald C. Loughry, Vice Chair Andrew G. Salem, Secretary Gilles A. BarilJim IsaakDon T. Michael* Jos A. Berrios de la Pa
24、zBen C. JohnsonMarco W. Migliaro Clyde R. CampWalter J. KarplusL. John Rankine Donald C. FleckensteinLorraine C. KevraArthur K. Reilly Jay Forster*E. G. “Al” KienerRonald H. Reimer David F. FranklinIvor N. KnightGary S. Robinson Ramiro GarciaJoseph L. Koepfinger*Leonard L. Tripp Donald N. HeirmanD.
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEEE 664 1993 R2007
链接地址:https://www.31doc.com/p-3770977.html