IEEE-62243-2005.pdf
《IEEE-62243-2005.pdf》由会员分享,可在线阅读,更多相关《IEEE-62243-2005.pdf(128页珍藏版)》请在三一文库上搜索。
1、 INTERNATIONAL STANDARD IEC 62243 First edition 2005-07 IEEE 1232 Artificial intelligence exchange and service tie to all test environments (AI-ESTATE) Reference number IEC 62243(E):2005 IEEE Std. 1232(E):2002 Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS unde
2、r license with IEEELicensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/21/2007 11:32:29 MDTNo reproduction or networking permitted without license from IHS -,-,- Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For exa
3、mple, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publica
4、tion incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is availabl
5、e in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is al
6、so available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also
7、available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further info
8、rmation. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 Copyright The Institute of Electrical and Electronics Engineers, Inc. Provid
9、ed by IHS under license with IEEELicensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/21/2007 11:32:29 MDTNo reproduction or networking permitted without license from IHS -,-,- Artificial intelligence exchange and service tie to all test environments (AI-ESTATE) INTERNATIONAL STANDARD I
10、EC 62243 First edition 2005-07 IEEE 1232 Commission Electrotechnique Internationale International Electrotechnical Commission IEEE 2005 Copyright - all rights reserved IEEE is a registered trademark in the U.S. Patent any IEC National Committee interested in the subject dealt with may participate in
11、 this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
12、two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have
13、the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misint
14、erpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding nationa
15、l or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) Attention is drawn to the possibility that some of the eleme
16、nts of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC/IEEE 62243 has been processed through IEC technical committee 93: Design automation. The text of this standard is based on the
17、following documents: IEEE Std FDIS Report on voting 1232 (2002) 93/214/FDIS 93/220/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives. The
18、committee has decided that the contents of this publication will remain unchanged until 2007. IEC 62243:2005(E) IEEE 1232-2002(E) 3 Published by IEC under licence from IEEE. 2005 IEEE. All rights reserved. Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under li
19、cense with IEEELicensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/21/2007 11:32:29 MDTNo reproduction or networking permitted without license from IHS -,-,- IEC/IEEE Dual Logo International Standards This Dual Logo International Standard is the result of an agreement between the IEC a
20、nd the Institute of Electrical and Electronics Engineers, Inc. (IEEE). The original IEEE Standard was submitted to the IEC for consideration under the agreement, and the resulting IEC/IEEE Dual Logo International Standard has been published in accordance with the ISO/IEC Directives. IEEE Standards d
21、ocuments are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a consensus development process, approved by the American National Standards Institute, which brings togethe
22、r volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE administers the process and establishes rules to promote fairness in the consensus development process, the I
23、EEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. Use of an IEC/IEEE Dual Logo International Standard is wholly voluntary. The IEC and IEEE disclaim liability for any personal injury, property or other damage, of any nature whatso
24、ever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon this, or any other IEC or IEEE Standard document. The IEC and IEEE do not warrant or represent the accuracy or content of the material contained herein, an
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEEE 62243 2005
链接地址:https://www.31doc.com/p-3771503.html