IEEE-421.3-1997-R2004.pdf
《IEEE-421.3-1997-R2004.pdf》由会员分享,可在线阅读,更多相关《IEEE-421.3-1997-R2004.pdf(13页珍藏版)》请在三一文库上搜索。
1、The Institute of Electrical and Electronics Engineers, Inc. 345 East 47th Street, New York, NY 10017-2394, USA Copyright 1998 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 1998. Printed in the United States of America. ISBN 1-55937-989-8 No part of thi
2、s publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. IEEE Std 421.3-1997(R2004) (Revision of IEEE Std 421B-1979) IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Ma
3、chines Sponsor Energy Development and Power Generation Committee of the IEEE Power Engineering Society Reaffirmed 8 December 2004 IEEE Standards Board Approved 9 December 1997 IEEE Standards Board Abstract: High-potential test voltages for excitation systems used with synchronous machines are establ
4、ished. Test voltages are established based on whether equipment is connected to the exciter power circuit or is electrically isolated from the exciter power circuit. Keywords: dielectric testing, excitation systems, test voltages Copyright The Institute of Electrical and Electronics Engineers, Inc.
5、Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 00:18:26 MDTNo reproduction or networking permitted without license from IHS -,-,- IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinat-
6、ing Committees of the IEEE Standards Board. Members of the committees serve voluntarily and without compensation. They are not necessarily members of the Institute. The standards developed within IEEE represent a consensus of the broad expertise on the subject within the Institute as well as those a
7、ctivities outside of IEEE that have expressed an interest in participating in the develop- ment of the standard. Use of an IEEE Standard is wholly voluntary. The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other go
8、ods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. Every IEEE Standard is sub-
9、 jected to review at least every ve years for revision or reafrmation. When a document is more than ve years old and has not been reafrmed, it is reasonable to conclude that its contents, although still of some value, do not wholly reect the present state of the art. Users are cautioned to check to
10、determine that they have the latest edition of any IEEE Standard. Comments for revision of IEEE Standards are welcome from any interested party, regardless of membership afliation with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with approp
11、riate supporting comments. Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to specic applications. When the need for interpretations is brought to the attention of IEEE, the Institute will initiate action to prepare appropriate response
12、s. Since IEEE Standards rep- resent a consensus of all concerned interests, it is important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of its societies and Standards Coordinating Committees are not able to prov
13、ide an instant response to interpretation requests except in those cases where the matter has previously received formal consideration. Comments on standards and requests for interpretations should be addressed to: Secretary, IEEE Standards Board 445 Hoes Lane P.O. Box 1331 Piscataway, NJ 08855-1331
14、 USA Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for payment of licensing fee, please contact
15、 Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; (508) 750-8400. Permission to photocopy portions of any individual standard for educational class- room use can also be obtained through the Copyright Clearance Center. Note: Attention is called to the possibil
16、ity that implementation of this standard may require use of subject matter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. The IEEE shall not be responsible for identifying patents
17、 for which a license may be required by an IEEE standard or for conducting inquiries into the legal validity or scope of those patents that are brought to its attention. Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employee
18、s/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 00:18:26 MDTNo reproduction or networking permitted without license from IHS -,-,- Copyright 1998 IEEE. All rights reserved. iii Introduction (This introduction is not part of IEEE Std 421.3-1997, IEEE Standard for High-Potential Test Re
19、quirements for Excita- tion Systems for Synchronous Machines. ) This standard denes high-potential test requirements for excitation systems for synchronous machines. IEEE Std 421B-1979 established test voltages as a function of exciter output circuit and for all other circuits electrically isolated
20、from the exciter output circuit. This standard was written to agree with existing stan- dards as much as possible but expands the test voltages to account for stresses associated with high ceiling exciters. At the time that this standard was completed, the Hi-Pot Testing Task Force of the Equipment
21、Working Group of the Excitation Systems Subcommittee of the Energy Development and Power Generation Commit- tee had the following membership: R. A. Lawson, Chair The following persons were on the balloting committee that approved this standard for submission to the IEEE Standards Board: J. C. Agee M
22、. J. Basler R. Beaulieu K. E. Bollinger S. Corsi M. L. Crenshaw T. W. Eberly A. Godwani H. Herzog J. D. Hurley J. F. Luini O. P. Malik C. R. Mummert A. M. Murdoch R. C. Shaefer M. Zakhour L. D. Boydstun S. R. Brockschink R. O. Bylin D. Diamant G. R. Engman W. W. Fields J. H. Gurney T. J. Hammons K.
23、Hancock R. D. Handel T. A. Higgins J. D. Hurley H. J. Jones D. L. Kornegay P. R. H. Landrieu C. A. Lennon, Jr. G. L. Luri J. T. Madill O. P. Malik O. S. Mazzoni D. R. McCabe M. W. Migliaro W. R. Moon C. R. Pope B. M. Radimer G. P. Rahman J. R. Ribeiro D. M. Sawyer K. H. Sebra J. E. Stoner M. V. Thad
24、en E. T. Voelker Copyright The Institute of Electrical and Electronics Engineers, Inc. Provided by IHS under license with IEEELicensee=IHS Employees/1111111001, User=OConnor, Maurice Not for Resale, 04/29/2007 00:18:26 MDTNo reproduction or networking permitted without license from IHS -,-,- iv Copy
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEEE 421.3 1997 R2004
链接地址:https://www.31doc.com/p-3771645.html