BS-5448-1977 ISO-3791-1976.pdf
《BS-5448-1977 ISO-3791-1976.pdf》由会员分享,可在线阅读,更多相关《BS-5448-1977 ISO-3791-1976.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 5448:1977 ISO 3791:1976 Specification for Keyboard layouts for numeric applications on office machines and data processing equipment UDC 681.327.11:681.612.065.1:003.35 Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:15:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5
2、448:1977 This British Standard, having been prepared under the direction of the Office Machines and Equipment Standards Committee and the Data Processing Standards Committee, was published under the authority of the Executive Board on 31 December 1976 BSI 12-1999 The following BSI references relate
3、to the work on this standard: Committee references OMS/3 and DPS/7 Draft for comment 75/61369 ISBN 0 580 09930 X Cooperating organizations The Office Machines and Equipment Standards Committee and the Data Processing Standards Committee, under whose supervision this British Standard was prepared, co
4、nsist of representatives from the following Government departments and scientific and industrial organizations: The Government departments and scientific and industrial organizations marked with an asterisk in the above list, together with the following, were directly represented on the committee en
5、trusted with the preparation of this British Standard: AslibHer Majestys Stationery Office* Association of Certified and CorporateHM Customs and Excise AccountantsInstitute of Administrative Management British AirwaysInstitute of Chartered Accountants in England British Bankers Association*and Wales
6、* British Computer Society*Institute of Chartered Secretaries and British Paper and Board Industry FederationAdministrators* (PIF)Institute of Cost and Management British Printing Industry Federation*Accountants Business Equipment Trade Association*Institute of Electrical Engineers Civil Service Dep
7、artment*Institute of Municipal Treasurers and Civil Service Department, Central ComputerAccountants (Incorporated) Agency*Institution of Electrical and Electronics Committee of London Clearing BankersTechnician Engineers Department of the EnvironmentInstitution of Mechanical Engineers Department of
8、the Environment (FireLondon Transport Executive Research Station)Ministry of Defence Department of IndustryNational Coal Board* Drawing Office Material Manufacturers andNational Physical Laboratory, Department of Dealers AssociationIndustry Electricity Supply Industry in England andNational Research
9、 Development Corporation WalesOffice Machines and Equipment Federation* Electronic Engineering AssociationPost Office Engineering Equipment Users AssociationSociety of British Aerospace Companies Government Communications Headquarters British Railways BoardGreater London Council Health and Safety Ex
10、ecutive, HM FactoryRadio and Electronic Component InspectorateManufacturers Federation Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:15:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5448:1977 BSI 12-1999i Contents Page
11、Cooperating organizationsInside front cover Forewordii 1Scope1 2Field of application1 3Reference1 4Layout1 Figure 11 Figure 21 Figure 32 Figure 42 Figure 52 Figure 62 Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:15:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5448:1977 ii BSI 12-199
12、9 Foreword This British Standard is identical with ISO 3791 “Office machines and data processing equipment Keyboard layouts for numeric applications”, which was developed by Subcommittee 14 of Technical Committee 95, Office machines, of the International Organization for Standardization (ISO). Termi
13、nology and conventions. The text of the International Standard has been accepted, as suitable for publication, without deviation, as a British Standard. Certain terminology and conventions are used, however, that are not strictly appropriate in a British Standard, and attention is therefore drawn to
14、 the following. Wherever the words “International Standard”, relating to this publication, appear, they should be interpreted as “British Standard”. The comma has been used throughout as a decimal marker. In British Standards it is current practice to use a full point (a full stop on the baseline) a
15、s the decimal marker. Cross-reference. ISO 1092 referred to in the footnote to 2.2 and clause 3 is expected to be published as a British Standard in the near future. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible
16、for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 and 2 and a back cover. This standard has been updated (see copyright da
17、te) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:15:15 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5448:1977 BSI 12-19991 1 Scope This International Standard specifies th
18、e basic layout of numerals and symbols on keyboards intended to be used in applications where the data are generally numeric. 2 Field of application 2.1 This International Standard is intended for use in establishing complete keyboard layouts for particular machines. It is applicable to both office
19、machines and data processing equipment, and to both numeric and alphanumeric keyboards. It does not apply to alphanumeric keyboards with an in-board numeric cluster. 2.2 The layouts described in this International Standard are concerned only with the nominal relative positions of keys; they are not
20、intended to define physical factors, such as key spacing, keyboard slope, size and shape of keytops, nor the way in which the keytops are inscribed. The definition of such physical factors may be the subject of other International Standards.1) 3 Reference ISO 1092, Adding machines and calculating ma
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-5448-1977 ISO-3791-1976 BS 5448 1977 ISO 3791 1976
链接地址:https://www.31doc.com/p-3771979.html