BS-5368-2-1980 EN-86-1980.pdf
《BS-5368-2-1980 EN-86-1980.pdf》由会员分享,可在线阅读,更多相关《BS-5368-2-1980 EN-86-1980.pdf(16页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD CONFIRMED MARCH 1986 BS 5368-2: 1980 EN 86 Methods of testing Windows Part 2: Watertightness test under static pressure This European Standard EN 86 was given, as from 28 November 1980, the status of a British Standard. UDC 69.028.2:620.1:539.218:551.578.1 Licensed Copy: sheffieldun
2、 sheffieldun, na, Mon Dec 04 16:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5368-2:1980 This British Standard was published under the authority of the Executive Board and comes into effect on 28 November 1980 BSI 02-1999 The following BSI references relate to the work on this standard: Commi
3、ttee reference ECB/15 Draft for comment 76/12643 DC ISBN 0 580 11674 3 Cooperating organizations The European Committee for Standardization, under whose supervision this European Standard was prepared, comprises the national standards organizations of the following Western European countries: Austri
4、aOesterreichisches Normungsinstitut BelgiumInstitut Belge de Normalisation DenmarkDansk Standardiseringsraad FinlandSuomen Standardisoimislitto, r.y. FranceAssociation Franaise de Normalisation GermanyDeutsches Institut fr Normung e.V. IrelandInstitute for Industrial Research and Standards ItalyEnte
5、 Nazionale Italiano di Unificazione NetherlandsNederlands Normalisatie-instituut NorwayNorges Standardiseringsforbund PortugalRepartio de Normalizao SpainInstituto Nacional de Racionalizacin y Normalizacin SwedenStandardiseringskommissionen i Sverige SwitzerlandAssociation Suisse de Normalisation Un
6、ited KingdomBritish Standards Institution Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5368-2:1980 BSI 02-1999i Contents Page Cooperating organizationsInside front cover
7、 National forewordii Brief history2 1Scope3 2Field of application3 3Principle of the test3 4Terminology3 5Apparatus3 6Preparation of window for testing3 7Preparation for the test3 8Test4 9Recording of results4 Annex Untitled5 National appendix A10 Figure 1 Watertightness test under static pressure6
8、Figure 2 Spraying method no. 17 Figure 3 Spraying method no. 28 Figure 4 Spraying method no. 39 Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5368-2:1980 ii BSI 02-1999 National foreword BS 5368-2 (EN 86) is the fourth Part to be publis
9、hed in a series on methods of testing windows. Other Parts in the series are as follows: Part 1:1976 (EN 42) Air permeability test; Part 3:1978 (EN 77) Wind resistance tests; Part 4:1978 (EN 78) Form of test report. The European Standard on mechanical tests (EN 107) has not been accepted by the Unit
10、ed Kingdom and will not therefore be published as Part 5 of this series. The United Kingdom is, however, participating in further consideration of these tests in the International Organization for Standardization (ISO). It is to be noted that the comma has been used throughout as a decimal marker. I
11、n British Standards it is current practice to use a full point on the baseline as the decimal marker. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standar
12、d does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the EN title page, pages 2 to 10 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated.
13、 This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 86 Edition 1 April 1980 UDC 69.028.2:620.1:539.218:551.578.1 Key w
14、ords: Windows, tests, watertightness tests, pressure tests English version Methods of testing windows Watertightness test under static pressure Mthodes dessais des fentres Essai d tanchit l eau sous pression statique Prfverfahren fr Fenster Prfung der Schlagregendichtheit unter statischem Druck This
15、 European Standard was accepted by CEN on 1980-04-04. The CEN Members are bound to adhere to the CEN Internal Regulations which specify under which conditions this European Standard has to be given, without any alteration, the status of a national standard. Up-to-date lists and bibliographical refer
16、ences concerning such national standards may be obtained on application to the CEN Central Secretariat or to any CEN Member. This European Standard is established by CEN in three official versions (English, French, German). A translation made by another member under its own responsibility, in its ow
17、n language, and notified to CEN, has the same status. CEN members are the national standards organizations of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standard
18、ization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue Brderode, 2, B-1000 Brussels Copyright reserved to all CEN members Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 86 BSI 02-1999 2 Brief histo
19、ry This European Standard was drawn up by the Technical Committee CEN/TC 33 “Technological tests for doors, windows, shutters and building hardware”, the Secretariat of which is held by AFNOR. This European Standard was adopted by CEN on the strength of its acceptance by the following member countri
20、es: Austria, Belgium, Finland, France, Germany, Ireland, Italy, Netherlands, Portugal, Spain, Switzerland, United Kingdom. Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 16:05:31 GMT+00:00 2006, Uncontrolled Copy, (c) BSI EN 86 BSI 02-19993 1 Scope This standard defines the methods to be use
21、d for the watertightness test under static pressure of windows to be fitted in exterior walls, and supplied in the form of finished units in actual operating conditions. 2 Field of application This standard applies to all windows including door-height windows made of any material, in the actual oper
22、ating conditions in which they should be used and fixed according to the manufacturers recommendations in a finished building, bearing in mind the conditions of test as defined hereafter. The standard does not apply to the joints between the windows and surrounding components and material. 3 Princip
23、le of the test The principle of the test is to apply a quantity of water and an air pressure under defined conditions, on the outside surface of the window and to note possible water leakage. 4 Terminology 4.1 Watertightness. The ability of a closed window to resist the water leakages. It is observe
24、d in the conventional conditions of test defined in the standard. 4.2 Water leakage. The penetration of water that would continuously or repeatedly wet parts of a building or components not designed to be wetted. 4.3 Limit of watertightness. Maximum pressure recorded during the test at which waterti
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-5368-2-1980 EN-86-1980 BS 5368 1980 EN 86
链接地址:https://www.31doc.com/p-3771986.html