BS-5279-1976 ISO-3541-1975.pdf
《BS-5279-1976 ISO-3541-1975.pdf》由会员分享,可在线阅读,更多相关《BS-5279-1976 ISO-3541-1975.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 5279:1976 ISO 3541:1975 Specification for Dimensions of fuel filler openings of earth-moving machinery UDC 629.11-479:622.232:62-225.12-181 BS 5279:1976 This British Standard, having been prepared under the direction of the Road Engineering Standards Committee was published under
2、 the authority of the Executive Board on 31 March 1976 BSI 12-1999 The following BSI references relate to the work on this standard: Committee reference RDB/21 Draft for comment 74/43847 ISBN 0 580 09163 5 Cooperating organizations The Road Engineering Standards Committee, under whose supervision th
3、is British Standard was prepared, consists of representatives from the following Government departments and scientific and industrial organizations: Asphalt and Coated Macadam Association Association of Consulting Engineers British Quarrying and Slag Federation British Tar Industry Association Cemen
4、t and Concrete Association Concrete Society (Design and Development Divisional Committee) Contractors Plant Association* County Surveyors Society Department of the Environment* Department of the Environment, Transport and Road Research Laboratory Federation of Civil Engineering Contractors* Federati
5、on of Manufacturers of Construction Equipment and Cranes* Greater London Council Institute of Petroleum Institute of Quarrying Institution of Civil Engineers* Institution of Highway Engineers* Institution of Municipal Engineers* Institution of Structural Engineers Ministry of Defence* Refined Bitume
6、n Association Limited Road Emulsion Association Limited Road Surface Dressing Association Sand and Gravel Association Limited Society of Chemical Industry Individual experts The organizations marked with an asterisk in the above list, together with the following, were directly represented on the com
7、mittee entrusted with the preparation of this British Standard: Associated Offices Technical Committee British Steel Industry Department of Employment Department of Industry National Coal Board Individual experts Amendments issued since publication Amd. No.Date of issueComments BS 5279:1976 BSI 12-1
8、999i Contents Page Cooperating organizationsInside front cover Forewordii 1Scope and field of application1 2Terminology1 3Sizes1 4Dimensions2 BS 5279:1976 ii BSI 12-1999 Foreword This British Standard has been prepared under the authority of the Road Engineering Standards Committee. The text of this
9、 standard is identical to that of the published International Standard 3541 “Earth moving machinery Dimensions of fuel filler openings” which was produced as a result of international discussions in which the UK took an active part. For the purposes of this British Standard the text of ISO 3541 shou
10、ld be modified as follows. Terminology. The words “British Standard” should replace the words “International Standard” wherever they occur. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct applicat
11、ion. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 and 2 and a back cover. This standard has been updated (see copyright date) and may have had amend
12、ments incorporated. This will be indicated in the amendment table on the inside front cover. BS 5279:1976 BSI 12-19991 1 Scope and field of application This International Standard lays down the dimensions of fuel filler openings and caps for earth-moving machinery. 2 Terminology The terminology rela
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-5279-1976 ISO-3541-1975 BS 5279 1976 ISO 3541 1975
链接地址:https://www.31doc.com/p-3772121.html