BS-5760-10.1-1993 IEC-60605-1-1978.pdf
《BS-5760-10.1-1993 IEC-60605-1-1978.pdf》由会员分享,可在线阅读,更多相关《BS-5760-10.1-1993 IEC-60605-1-1978.pdf(28页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 5760-10.1: 1993 IEC 605-1: 1978 Reliability of systems, equipment and components Part 10: Guide to reliability testing Section 10.1 General requirements Licensed Copy: sheffieldun sheffieldun, na, Fri Dec 01 13:41:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5760-10.1:1993 Th
2、is British Standard, having been prepared under the direction of the Quality, Management and Statistics Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 February 1993 BSI 02-1999 The following BSI references relate to the work on this s
3、tandard: Committee reference QMS/23 Special announcement in BSI News August 1992 ISBN 0 580 21972 0 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Quality, Management and Statistics Standards Policy Committee (QMS/-) to Technical Commit
4、tee QMS/23, upon which the following bodies were represented: AEA Technology Association of Consulting Engineers Association of Project Managers British Gas plc British Railways Board City University Civil Aviation Authority Consumers Association Cranfield Information Technology Institute Cranfield
5、Institute of Technology Design Council EEA (the Association of Electronics, Telecommunications and Business Equipment Industries) Electricity Association Electronic Components Industry Federation Engineering Equipment and Materials Users Association GAMBICA (BEAMA Ltd.) Institute of Petroleum Instit
6、ute of Quality Assurance Institution of Electrical Engineers Institution of Plant Engineers Mercury Communications Limited Ministry of Defence National Computing Centre Ltd. Railway Industry Association of Great Britain Royal Institution of Chartered Surveyors Safety and Reliability Society Society
7、of British Aerospace Companies Limited Society of Environmental Engineers Society of Motor Manufacturers and Traders Limited University of Technology, Loughborough Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Fri Dec 01 13:41:56 GMT+00:00 2006,
8、 Uncontrolled Copy, (c) BSI BS 5760-10.1:1993 BSI 02-1999i Contents Page Committees responsibleInside front cover National forewordii Scope1 1Introduction1 2Object of this standard2 3Applicability of the methods given2 4Definitions and related documents2 5Principles of reliability compliance testing
9、3 6Principles of reliability determination testing4 7Test item sampling and statistical test plans4 8Test conditions9 9Test item performance and test observations11 10General test procedure12 11Field testing considerations14 12Test reports15 13Summary of details to be included in the detailed reliab
10、ility test specification or the equipment specification17 Appendix A Flow chart describing preparations for and execution of reliability tests18 Figure 16 Figure 26 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Fri Dec 01 13:41:56 GMT+00:00 2006, Uncontrolled Copy,
11、(c) BSI BS 5760-10.1:1993 ii BSI 02-1999 National foreword This Part of BS 5760 has been prepared under the direction of the Quality, Management and Statistics Standards Policy Committee. It is identical with IEC 605-1:1978 Equipment reliability testing Part 1: General requirements, including amendm
12、ent No. 1:1982, published by the International Electrotechnical Commission (IEC). Ten Parts of this standard have been published and these may be summarized as follows: Part 0: Introductory guide to reliability. This Part provides guidance to directors of companies who need to know why reliability i
13、s important to them, to engineers not trained in quality and reliability to show how reliability should influence their technical decision making, and to middle management not specialized in engineering, to explain how measures to achieve reliability should be integrated with other aspects of projec
14、t management to give optimum results. Part 1: Guide to reliability and maintainability programme management. This Part discusses the essential features of a comprehensive reliability and maintainability programme for the planning, organization, direction and control of resources to produce systems,
15、equipment and components which will be reliable and maintainable. It includes consideration of the specification and assessment of reliability and maintainability and of arrangements for the collection of reliability data. Part 2: Guide to the assessment of reliability. This Part recommends general
16、procedures for the assessment of reliability of hardware systems and contains guidance for the reliability practitioner on the quantitative and statistical aspects of reliability, such as reliability modelling, the provision of data, and the concepts of redundancy and simulation. Part 3: Guide to re
17、liability practices: examples. This Part contains authentic practical examples illustrating the principles established in Parts 1 and 2 of BS 5760. Part 4: Guide to specification clauses relating to the achievement and development of reliability in new and existing items. This Part provides more det
18、ailed guidance on the specification of reliability. Part 5: Guide to failure modes, effects and criticality analysis (FMEA and FMECA). This Part describes failure modes and effects analysis (FMEA) and failure modes, effects and criticality analysis (FMECA), and gives guidance on the application of t
19、hese techniques. Part 6: Guide to programmes for reliability growth. This Part describes procedures to expose and remove weaknesses in hardware and software items in order to achieve acceptable reliability in a product. It explains basic concepts, management and test procedures and describes techniq
20、ues for analysis and correction of failures. Part 7: Guide to fault tree analysis. This Part describes fault tree analysis and gives guidance on the application of this technique that may be used to identify factors affecting the reliability, performance and safety characteristics of a system. Part
21、9: Guide to the block diagram technique. This Part describes the use of the block diagram technique for modelling and evaluating the reliability of both elementary and more complex systems. The extension of the method to calculate availability is also outlined. Part 10: Guide to reliability testing:
22、 Section 10.1 General requirements. This Section provides guidance on general principles, procedures and considerations for reliability testing in the laboratory and in the field. NOTEFurther Sections of Part 10 are planned based on other Parts of IEC 605 and related IEC standards. Licensed Copy: sh
23、effieldun sheffieldun, na, Fri Dec 01 13:41:56 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5760-10.1:1993 BSI 02-1999iii Further Parts of BS 5760 are envisaged in order to provide guidance on other techniques of reliability management. At present two further Parts are in the process of being draft
24、ed, and these are as follows: Part 8: Guide to the assessment of reliability of systems containing software. This Part will provide guidance on the assessment of reliability of systems containing software. NOTEPart 8 is currently published as DD 198:1991. Part 11: Guide to the collection of reliabil
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-5760-10.1-1993 IEC-60605-1-1978 BS 5760 10.1 1993 IEC 60605 1978
链接地址:https://www.31doc.com/p-3772214.html