BS-5506-3-1977.pdf
《BS-5506-3-1977.pdf》由会员分享,可在线阅读,更多相关《BS-5506-3-1977.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 5506-3: 1977 Incorporating Amendment No.1 Specification for Wash basins Part 3: Wash basins (one or three tap holes) Materials, quality, design and construction UDC 696.143:645.681.4 BS 5506-3:1977 This British Standard, having been prepared under the direction of the Sanitary Ap
2、pliances Standards Committee, was published under the authority of the Executive Board on 30 September 1977 BSI 01-2000 The following BSI references relate to the work on this standard: Committee reference SAB/1 Draft for comment 76/11211 DC ISBN 0 580 09805 2 Cooperating organizations The Sanitary
3、Appliances Standards Committee, under whose direction this British Standard was prepared, consists of representatives from the following Government departments and scientific and industrial organizations: Bath Manufacturers Co-ordinating Committee Chartered Institution of Building Services Council o
4、f British Ceramic Sanitaryware Manufacturers* Department of the Environment Department of the Environment, Building Research Establishment* Department of the Environment, Housing and Construction* Department of the Environment, Property Services Agency* Environmental Health Officers Association* Gre
5、ater London Council Institute of Plumbing* Institution of Municipal Engineers* Institution of Public Health Engineers* Metal Sink Manufacturers Association* Ministry of Defence National Brassfoundry Association* National Federation of Builders and Plumbers Merchants* National Water Council* Royal In
6、stitute of British Architects Royal Institute of Public Health and Hygiene Royal Society of Health Water Companies Association The organizations marked with an asterisk in the above list, together with the following, were directly represented on the committee entrusted with the preparation of this B
7、ritish Standard: British Bath Manufacturers Association British Ceramic Research Association British Ironfounders Association British Plastics Federation British Woodwork Manufacturers Association Consumer Standards Advisory Committee of BSI Good Housekeeping Institute Institution of Water Engineers
8、 and Scientists Modular Society Limited National Association of Plumbing, Heating and Mechanical Services Contractors Plastic Bath Manufacturers Association South London Consortium Individual manufacturer Amendments issued since publication Amd. No.Date of issueComments 4915April 1989Indicated by a
9、sideline in the margin BS 5506-3:1977 BSI 01-2000i Contents Page Cooperating organizationsInside front cover Forewordii Section 1. General 1Scope1 2References1 3Marking1 4Inspection1 5Rejection1 Section 2. Materials and quality 6Materials1 7Quality1 Section 3. Dimensions, design and construction 8Di
10、mensions1 9Platform for supply fittings1 10Overflow1 11Pedestals1 12Soap sinking(s)1 13Chain stay hole1 Publications referred toInside back cover BS 5506-3:1977 ii BSI 01-2000 Foreword This Part of this British Standard has been prepared under the direction of the Sanitary Appliances Standards Commi
11、ttee in order to supplement the following standards. BS 5506, Wash basins Part 1: EN 31 Pedestal wash basins. Connecting dimensions. BS 5506, Wash basins Part 2: EN 32 Wall hung wash basins. Connecting dimensions. Wash basins with two tap holes are covered in BS 1188 “Ceramic wash basins and pedesta
12、ls”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document compr
13、ises a front cover, an inside front cover, pages i and ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. BS 5506-3:1977 BSI 0
14、1-20001 Section 1. General 1 Scope This Part of this British Standard specifies materials, quality, design and construction of wall hung and pedestal wash basins with one or three tap holes in the tap platform with or without an overflow and/or a chain stay hole, and. 2 References The titles of the
15、publications referred to in this Part of this standard are listed on the inside back cover. 3 Marking Wash basins manufactured to the requirements of this standard shall be permanently marked with the following information. a) The manufacturers name or identification mark. b) The number of this Brit
16、ish Standard, i.e., BS 5506-3. c) Either EN 31 or EN 32 as appropriate. 4 Inspection The purchaser or his representative shall, if required, be granted facilities for the purpose of carrying out inspection prior to delivery. 5 Rejection The purchaser shall have the option of rejecting any wash basin
17、 purporting to meet the requirements of this standard if it fails to meet any of the requirements laid down therein. Minor imperfections which do not affect the appearance or efficiency of the article shall not constitute valid reasons for rejection. Section 2. Materials and quality 6 Materials Wash
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS 5506 1977
链接地址:https://www.31doc.com/p-3772225.html