BS-6955-19-1994 ISO-5347-19-1993.pdf
《BS-6955-19-1994 ISO-5347-19-1993.pdf》由会员分享,可在线阅读,更多相关《BS-6955-19-1994 ISO-5347-19-1993.pdf(6页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 6955-19: 1994 ISO 5347-19: 1993 Calibration of vibration and shock pick-ups Part 19: Method of test for magnetic field sensitivity UDC 534.1:681.327.7:53.089.6 Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 05:16:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6955-19:19
2、94 This British Standard, having been prepared under the direction of the General Mechanical Engineering Standards Policy Committee, was published under the authority of the Standards Board and comes into effect on 15 March 1994 BSI 10-1999 The following BSI references relate to the work on this sta
3、ndard: Committee reference GME/21 Draft for comment 87/72304 DC ISBN 0 580 23091 0 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the General Mechanical Engineering Standards Policy Committee (GME/-) to Technical Committee GME/21, upon whic
4、h the following bodies were represented: Electricity Association Federation of Civil Engineering Contractors Imperial College of Science and Technology Institute of Sound and Vibration Research Institution of Mechanical Engineers Lloyds Register of Shipping Ministry of Defence Open University Power
5、Generation Contractors Association PGCA (BEAMA Ltd.) Railway Industry Association of Great Britain Sira Test and Certification Ltd. Society of British Aerospace Companies Limited The following bodies were also represented in the drafting of the standard, through subcommittees and panels: British Coa
6、l Corporation Health and Safety Executive Society of Environmental Engineers University of Cranfield Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 05:16:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6955-19:1994 BSI 10-1999i Conten
7、ts Page Committees responsibleInside front cover National forewordii 1Scope1 2Apparatus1 3Method1 Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 05:16:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6955-19:1994 ii BSI 10-1999 National foreword This Part of BS 6955 has been prepared under t
8、he direction of the General Mechanical Engineering Standards Policy Committee. It is identical with ISO 5347-19:1993 Methods for the calibration of vibration and shock pick-ups Part 19: Testing of magnetic field sensitivity, published by the International Organization for Standardization (ISO). ISO
9、5347-19 was prepared by Technical Committee ISO/TC 108, Mechanical vibration and shock, in which the UK played an active part. BS 6955 consists of the following Parts, which are identical with the corresponding Parts of ISO 5347: Part 0: Guide to basic principles; Part 1: Methods for primary vibrati
10、on calibration by laser interferometry; Part 2: Method for primary shock calibration by light cutting; Part 3: Method for secondary vibration calibration; Part 4: Method for secondary shock calibration; Part 5: Method for calibration by Earths gravitation; Part 6: Method for primary vibration calibr
11、ation at low frequencies; Part 7: Methods for primary calibration by centrifuge; Part 8: Method for primary calibration by dual centrifuge; Part 9: Method for secondary vibration calibration by comparison of phase angles; Part 10: Method for primary calibration by high impact shocks; Part 11: Method
12、 of test for transverse vibration sensitivity; Part 12: Method of test for transverse shock sensitivity; Part 13: Method of test for base strain sensitivity; Part 14: Method of test for resonance frequency of undamped accelerometers on a steel block; Part 15: Method of test for acoustic sensitivity;
13、 Part 16: Method of test for mounting torque sensitivity; Part 17: Method of test for fixed temperature sensitivity; Part 18: Method of test for transient temperature sensitivity; Part 19: Method of test for magnetic field sensitivity. Part 20 of ISO 5347 is in preparation. It is envisaged that when
14、 it is published it will be implemented as Part 20 of BS 6955. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity fr
15、om legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, page 1 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside fron
16、t cover. Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 05:16:42 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6955-19:1994 BSI 10-19991 1 Scope ISO 5347 comprises a series of documents dealing with methods for the calibration of vibration and shock pick-ups. This part of ISO 5347 lays down
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-6955-19-1994 ISO-5347-19-1993 BS 6955 19 1994 ISO 5347 1993
链接地址:https://www.31doc.com/p-3772234.html