BS-5667-17-1979 ISO-5043-1977.pdf
《BS-5667-17-1979 ISO-5043-1977.pdf》由会员分享,可在线阅读,更多相关《BS-5667-17-1979 ISO-5043-1977.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 5667-17: 1979 ISO 5043: 1977 Specification for Continuous mechanical handling equipment Safety requirements Part 17: Unit loads: continuous plate conveyors (horizontal) ISO title: Continuous mechanical handling equipment for unit loads Continuous plate conveyors (horizontal): Saf
2、ety code UDC 621.867:614.8 + 621.867.152.3 Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:43:06 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5667-17:1979 This British Standard, having been prepared under the direction of the Mechanical Engineering Standards Committee, was published under
3、 the authority of the Executive Board on 31 January 1979 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference MEE/128 Draft for comment 76/72202 DC ISBN 0 580 10522 9 Cooperating organizations The Mechanical Engineering Standards Committee, under whose di
4、rection this British Standard was prepared, consists of representatives from the following Government departments and scientific and industrial organizations: The organizations marked with an asterisk in the above list, together with the following, were directly represented on the committee entruste
5、d with the preparation of this British Standard: Associated Offices Technical Committee*Department of the Environment Association of Consulting Engineers*Department of Trade (Marine Division) Association of Hydraulic Equipment Engineering Equipment Users Association* ManufacturersFederation of Manuf
6、acturers of Construction Association of Mining, Electrical and Equipment and Cranes Mechanical EngineersHealth and Safety Executive* British Compressed Air SocietyInstitution of Gas Engineers British Electrical and Allied Manufacturers Institution of Mechanical Engineers Association (BEAMA)Instituti
7、on of Plant Engineers British Gas CorporationInstitution of Production Engineers* British Gear Manufacturers AssociationLondon Transport Executive British Internal Combustion Engine Machine Tool Trades Association Manufacturers AssociationMinistry of Defence British Pump Manufacturers AssociationNat
8、ional Coal Board* British Steel CorporationOil Companies Materials Association British Steel IndustryProcess Plant Association Chartered Institution of Building ServicesRailway Industry Association of Great Crown Agents for Oversea Governments and Britain AdministrationsSociety of Motor Manufacturer
9、s and Traders Department of Industry (MechanicalLimited Engineering)Telecommunication Engineering and Department of Industry (National Manufacturing Association (TEMA) Engineering Laboratory)Water-tube Boilermakers Association Amalgamated Union of Engineering WorkersInstitution of Mining and Metallu
10、rgy British Quarrying and Slag FederationInstitution of Mining Engineers British Rubber Manufacturers AssociationMechanical Handling Engineers Association Chain Testers Association of Great BritainMetal Packaging Manufacturers Association Coke Oven Managers AssociationSand and Gravel Association Lim
11、ited Electrical, Electronic, Telecommunications Society of Dairy Technology and Plumbing Union Electricity Supply Industry in England and Wales Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:43:06 GMT+00:00 2006, Uncontroll
12、ed Copy, (c) BSI BS 5667-17:1979 BSI 10-1999i Contents Page Cooperating organizationsInside front cover National forewordii 1Scope1 2Field of application1 3References1 4Special safety rules1 Publications referred toInside back cover Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:43:06 GMT
13、+00:00 2006, Uncontrolled Copy, (c) BSI BS 5667-17:1979 ii BSI 10-1999 National foreword This British Standard has been prepared under the direction of the Mechanical Engineering Standards Committee. This Part is identical with ISO 5043 “Continuous mechanical handling equipment for conveyors (horizo
14、ntal) Safety code”, developed by Technical Committee ISO/TC 101, Continuous mechanical handling equipment. This Part, which forms one of a series, implements the safety code and should be read in conjunction with BS 5667-1. Terminology and conventions. The text of the International Standard has been
15、 approved as suitable for publication, without deviation, as a British Standard. Some terminology and certain conventions are not identical with those used in British Standards; attention is especially drawn to the following. Wherever the words “International Standard” appear, referring to this stan
16、dard, they should be interpreted as “British Standard”. Cross-references. The following International Standards are referred to in the text and for each there is a corresponding British Standard; these are as listed below: A British Standard does not purport to include all the necessary provisions o
17、f a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. International StandardCorresponding British Standard ISO 1819:1977BS 5667 Specification for continuous mechanical hand
18、ling equipment Safety requirements Part 1:1978 General (Identical) ISO 2148:1974BS 3810 Glossary of terms used in materials handling Part 2:1965 Terms used in connection with conveyors and elevators (excluding pneumatic and hydraulic handling) (Technically equivalent) Summary of pages This document
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-5667-17-1979 ISO-5043-1977 BS 5667 17 1979 ISO 5043 1977
链接地址:https://www.31doc.com/p-3772247.html