BS-5688-2-1979 ISO-1915-1972.pdf
《BS-5688-2-1979 ISO-1915-1972.pdf》由会员分享,可在线阅读,更多相关《BS-5688-2-1979 ISO-1915-1972.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 5688-2: 1979 ISO 1915:1972 Methods of test for Boric acid, boric oxide, disodium tetraborates, sodium perborates and crude sodium borates for industrial use Part 2: Determination of boric oxide content of boric oxide ISO title: Boric oxide for industrial use Determination of bori
2、c oxide content Volumetric method NOTEIt is recommended that this Part be read in conjunction with the information in the “General introduction”, published separately as BS 5688-0. UDC 661.65:546.273-31:543.062:546.273-31 Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 15:52:47 GMT+00:00 2006
3、, Uncontrolled Copy, (c) BSI BS 5688-2:1979 This British Standard, having been prepared under the direction of the Chemicals Standards Committee, was published under the authority of the Executive Board on 28 February 1979 BSI 12-1999 The following BSI references relate to the work on this standard:
4、 Committee reference CIC/16 Draft for comment 74/53496 DC ISBN 0 580 10535 0 National foreword This Part of BS 5688 is identical with ISO 1915 “Boric oxide for industrial use Determination of boric oxide content Volumetric method” published by the International Organization for Standardization (ISO)
5、. Terminology and conventions. The text of the International Standard has been approved as suitable for publication, without deviation, as a British Standard. Some terminology and certain conventions are not identical with those used in British Standards; attention is drawn to the following. Where t
6、he words “International Standard” appear, referring to this standard, they should be interpreted as “British Standard”. Cross-reference. At present there is no corresponding British Standard for ISO . . . . (see clause 5). Reference should be made to BS 5309 “Methods for sampling chemical products”
7、Part 4 “Sampling of solids”. Additional information Reagents. Unless otherwise stated, it is essential that the reagents used in this determination be of recognized analytical grade. NOTEIn 3.4 and 3.5, the symbol for concentration by volume should be sloping, i.e. “(V/V)”. A British Standard does n
8、ot purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside
9、front cover, pages i and ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No.Date o
10、f issueComments Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 15:52:47 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5688-2:1979 BSI 12-1999i Contents Page National forewordii 1Scope and field of application1 2Principle1 3Reagents1 4Apparatus1 5Sampling1 6Procedure1 7Expression of results1
11、8Test report1 Publication referred toInside back cover Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 15:52:47 GMT+00:00 2006, Uncontrolled Copy, (c) BSI ii blank Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 15:52:47 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5688-2:1979 BSI 12-
12、19991 1 Scope and field of application This International Standard specifies a volumetric method for the determination of the boric oxide content of boric oxide for industrial use. 2 Principle Titration of a dissolved test portion with a standard volumetric solution of sodium hydroxide in the presen
13、ce of mannitol or sorbitol, using phenolphthalein as indicator. 3 Reagents Distilled water or water of equivalent purity, free from carbon dioxide, shall be used in the test. 3.1 Mannitol, neutral, or alternatively sorbitol, neutral. These products shall satisfy the following condition: 5.0 g, disso
14、lved in 50 ml of carbon dioxide-free water, requires for neutralization not more than 0.3 ml of 0.02 N sodium hydroxide solution using phenolphthalein solution as indicator. 3.2 Hydrochloric acid, 0.25 N standard volumetric solution. 3.3 Sodium hydroxide, 0.5 N standard volumetric solution, free fro
15、m carbonate. 3.4 Screened methyl red, indicator solution. Dissolve 0.01 g of methyl red and 0.01 g of bromocresol green in 95 % (V/V) ethanol and dilute to 100 ml with the same ethanol. 3.5 Phenolphthalein, 10 g/l ethanolic solution. Dissolve 1 g of phenolphthalein in 95 % (V/V) ethanol, dilute to 1
16、00 ml with the same ethanol and add 0.02 N sodium hydroxide solution until the first appearance of a pink colour. 4 Apparatus Ordinary laboratory apparatus. 5 Sampling Follow the principles described in ISO .1), minimizing exposure during sampling to avoid absorption of atmospheric moisture. 6 Proce
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-5688-2-1979 ISO-1915-1972 BS 5688 1979 ISO 1915 1972
链接地址:https://www.31doc.com/p-3772277.html