IEEE-308-2001-R2007.pdf
《IEEE-308-2001-R2007.pdf》由会员分享,可在线阅读,更多相关《IEEE-308-2001-R2007.pdf(35页珍藏版)》请在三一文库上搜索。
1、IEEE Std 308-2001 (Revision of IEEE Std 308-1991) IEEE Standards 308 TM IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations Published by The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA 1 March 2002 IEEE Power
2、 Engineering Society Sponsored by the Nuclear Power Engineering Committee IEEE Standards Print: SH94970 PDF: SS94970 Recognized as an American National Standard (ANSI) The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2002 by the Instit
3、ute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 1 March 2002. Printed in the United States of America. Print: ISBN 0-7381-3082-6 SH94970 PDF: ISBN 0-7381-3083-4 SS94970 No part of this publication may be reproduced in any form, in an electronic retrieval system or ot
4、herwise, without the prior written permission of the publisher. IEEE Std 308-2001 (R2007) (Revision of IEEE Std 308-1991) IEEE Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations Sponsor Nuclear Power Engineering Committee of the IEEE Power Engineering Society Approved
5、 1 August 2002 American National Standards Institute Reaffirmed 21 March 2007 Approved 6 December 2001 IEEE-SA Standards Board Abstract: Class 1E portions of alternating current and direct current power systems and instrumentation and control power systems in single-unit and multiunit nuclear power
6、generating stations are covered. Not included are the preferred power supply; unit generator(s) and their buses; generator breaker; step-up, auxiliary, and start-up transformers; connections to the station switchyard; switchyard; transmission lines; and the transmission network. The intent is to pro
7、vide criteria for the determination of Class 1E power system design features, criteria for sharing Class 1E power systems in multiunit stations, the requirements for their testing and surveillance, and the requirements for documentation of the Class 1E power system. Keywords: Class 1E power systems,
8、 nuclear power station design, nuclear safety Copyright 2002 IEEE. All rights reserved.ii IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards through a
9、consensus development process, approved by the American National Standards Institute, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE adm
10、inisters the process and establishes rules to promote fairness in the consensus development process, the IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its standards. Use of an IEEE Standard is wholly voluntary. The IEEE disclaims liability
11、for any personal injury, property or other damage, of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or reliance upon this, or any other IEEE Standard document. The IEEE does not warrant or represent th
12、e accuracy or content of the material contained herein, and expressly disclaims any express or implied warranty, including any implied warranty of merchantability or fitness for a specific purpose, or that the use of the material contained herein is free from patent infringement. IEEE Standards docu
13、ments are supplied “AS IS.” The existence of an IEEE Standard does not imply that there are no other ways to produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE Standard. Furthermore, the viewpoint expressed at the time a standard is approve
14、d and issued is subject to change brought about through developments in the state of the art and comments received from users of the standard. Every IEEE Standard is subjected to review at least every five years for revision or reaffirmation. When a document is more than five years old and has not b
15、een reaffirmed, it is reasonable to conclude that its contents, although still of some value, do not wholly reflect the present state of the art. Users are cautioned to check to determine that they have the latest edition of any IEEE Standard. In publishing and making this document available, the IE
16、EE is not suggesting or rendering professional or other services for, or on behalf of, any person or entity. Nor is the IEEE undertaking to perform any duty owed by any other person or entity to another. Any person utilizing this, and any other IEEE Standards document, should rely upon the advice of
17、 a competent professional in determining the exercise of reasonable care in any given circumstances. Interpretations: Occasionally questions may arise regarding the meaning of portions of standards as they relate to specific applications. When the need for interpretations is brought to the attention
18、 of IEEE, the Institute will initiate action to prepare appropriate responses. Since IEEE Standards represent a consensus of concerned interests, it is important to ensure that any interpretation has also received the concurrence of a balance of interests. For this reason, IEEE and the members of it
19、s societies and Standards Coordinating Committees are not able to provide an instant response to interpretation requests except in those cases where the matter has previously received formal consideration. Comments for revision of IEEE Standards are welcome from any interested party, regardless of m
20、embership affiliation with IEEE. Suggestions for changes in documents should be in the form of a proposed change of text, together with appropriate supporting comments. Comments on standards and requests for interpretations should be addressed to: Secretary, IEEE-SA Standards Board 445 Hoes Lane P.O
21、. Box 1331 Piscataway, NJ 08855-1331 USA Authorization to photocopy portions of any individual standard for internal or personal use is granted by the Institute of Electrical and Electronics Engineers, Inc., provided that the appropriate fee is paid to Copyright Clearance Center. To arrange for paym
22、ent of licensing fee, please contact Copyright Clearance Center, Customer Service, 222 Rosewood Drive, Danvers, MA 01923 USA; +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Note:
23、Attention is called to the possibility that implementation of this standard may require use of subject mat- ter covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. The IEEE shall not b
24、e responsible for identifying patents for which a license may be required by an IEEE standard or for conducting inquiries into the legal validity or scope of those patents that are brought to its attention. -,-,- Copyright 2002 IEEE. All rights reserved.iii Introduction (This introduction is not par
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- IEEE 308 2001 R2007
链接地址:https://www.31doc.com/p-3772312.html