BS-6100-1.7.1-1986.pdf
《BS-6100-1.7.1-1986.pdf》由会员分享,可在线阅读,更多相关《BS-6100-1.7.1-1986.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 6100-1.7.1: 1986 Incorporating Amendment No. 1 Glossary of Building and civil engineering terms Part 1: General and miscellaneous Section 1.7 Characteristics and performance Subsection 1.7.1 Performance UDC 624 + 69:001.4 Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 01:
2、05:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6100-1.7.1:1986 This British Standard, having been prepared under the direction of the Basic Data and Performance Criteria for Civil Engineering and Building Structures Standards Committee, was published under the authority of the Board of BSI and
3、comes into effect on 28 February 1986 BSI 06-1999 The Committees responsible for this British Standard are shown in Part 0 The following BSI references relate to the work on this standard: Committee reference BDB/3 Draft for comment 85/10279 DC ISBN 0 580 15033 X Amendments issued since publication
4、Amd. No.Date of issueComments 7247August 1992Indicated by a sideline in the margin Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 01:05:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6100-1.7.1:1986 BSI 06-1999i Contents Page Forewordii 171 1Base terms1 171 2Assessment1 171 3Conditions and
5、 actions2 IndexInside back cover Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 01:05:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6100-1.7.1:1986 ii BSI 06-1999 Foreword This Subsection of Part 1 of BS 6100 has been prepared under the direction of the Basic Data and Performance Criteria
6、 for Civil Engineering and Building Structures Standards Committee. This Subsection is in part a revision of BS 4949:1973 “Glossary of terms relating to building performance”, which is withdrawn. A general introduction to and explanation of this glossary is given in Part 0 of BS 6100 which itemizes
7、the Parts, Sections and Subsections into which this glossary is divided and provides a general alphabetical index of all the terms in the Sections and Subsections already published. Those using individual Sections and Subsections of this glossary are urged to consult Part 0 when doing so. Note has b
8、een taken of BS 3811 “Glossary of maintenance management terms in terotechnology” and ISO/DIS 8402, “Quality assurance Vocabulary” in the preparation of this Subsection. The other Sections of this Part are as follows. 1.0 General 1.1 Types of building 1.2 Spaces 1.3 Parts of construction work 1.4 Ma
9、terials 1.5 Operations, associated plant and equipment 1.6 Persons 1.8 Environmental and physical planning It is expected that a further Subsection of this Section will be as follows. 1.7.2 Characteristics Terms are listed alphabetically in the index and are referred to by numbers which are found ag
10、ainst the term in the body of the Subsection. They are arranged in a classified order, each term having an individual number consisting of seven digits in two parts, the first of three digits, the second of four. The first three digits represent the number of the Part, Section and Subsection. The fo
11、urth digit represents the group of terms, the fifth digit represents the subgroup of terms (in this case, the fifth digit is 0 as there is no division into subgroups) and the last two digits represent the place within the subgroup. Deprecated terms are given in medium type below the preferred terms
12、with their status indicated. These terms are not individually numbered, but are included in the index with a reference to the preferred term. Terms of more than one word, e.g. “type test” are written in a direct style, not as “test, type”. The inverted term is included in the index with a reference
13、to the direct term. Italicized words in definitions indicate that they are defined elsewhere in this Subsection. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a Brit
14、ish Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments
15、 incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 01:05:26 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6100-1.7.1:1986 BSI 06-19991 171 1 Base terms No.TermDefinition 171 1001performanceBehaviour related t
16、o use. 171 1002performance requirement Performance to be fulfilled. 171 1003actual performancePerformance as measured. 171 1004propertyInherent or acquired feature of an item. 171 1005qualityTotality of properties that bear on ability to satisfy needs. 171 1006characteristicProperty that distinguish
17、es between the totality of items under consideration. 171 1007capabilityMeasure of a characteristic. 171 1008attributeCharacteristic that is assessed in terms of whether it meets or does not meet a given performance (e.g. go or not go) 171 1009variableCharacteristic that is assessed in terms of valu
18、es on a continuous scale. 171 2 Assessment 171 2001assessment evaluation deprecated appraisal deprecated Examination of suitability of an item for a specific use. 171 2002testCritical trial of one or more properties. 171 2003accelerated testTest devised to shorten time of response of an item to acti
19、ons. 171 2004type testTest of an item to ascertain whether other items made to the same design or specification would pass an identical test. 171 2005performance testTest giving data on actual performance. 171 2006performance assessment performance evaluation deprecated Judgement of predicted perfor
20、mance based on comparison of actual performance with performance requirement. 171 2007performance deviationAmount by which actual performance exceeds or falls short of performance requirement. 171 2008precisionQuantitive measure of closeness of nearly equal values. 171 2009sampleGroup of items taken
21、 from a totality of items or portion of material taken from a bulk of material for assessment. 171 2010specimenRepresentative single item or measured quantity of material. 171 2011prototypeItem produced for purposes of assessment prior to final production. 171 2012modelRepresentation of a design. 17
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS 6100 1.7 1986
链接地址:https://www.31doc.com/p-3772439.html