BS-6185-1982.pdf
《BS-6185-1982.pdf》由会员分享,可在线阅读,更多相关《BS-6185-1982.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD CONFIRMED MARCH 1988 BS 6185:1982 Incorporating Amendment No. 1 Specification for Size designation of mens wear UDC 687.11-181:006.78 Licensed Copy: sheffieldun sheffieldun, na, Wed Dec 06 12:50:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6185:1982 This British Standard, having
2、 been prepared under the direction of the Clothing Standards Committee, was published under the authority of the Board of BSI and comes into effect on 30 April 1982 BSI 03-1999 The following BSI references relate to the work on this standard: Committee reference CLM/1 Drafts for comment 74/35787 DC
3、77/35002 DC ISBN 0 580 12440 1 Cooperating organizations The Clothing Standards Committee, under whose direction this British Standard was prepared, consists of representatives from the following: British Apparel Manufacturers Association Ltd.* British Footwear Manufacturers Federation British Man-m
4、ade Fibres Federation British Multiple Retailers Association* British Railways Board British Textile Employers Association Clothing and Footwear Institute* Clothing Manufacturers Federation of Great Britain* Consumer Standards Advisory Committee of BSI* Consumers Association* Department of Industry
5、(Chemicals and Textiles)* Drapers Chamber of Trade* Industrial Safety (Protective Equipment) Manufacturers Association Institute of Purchasing and Supply Instock Footwear Suppliers Association Knitting Industries Federation Ltd.* Mail Order Traders Association of Great Britain* Manchester Chamber of
6、 Commerce* Ministry of Defence* Multiple Shoe Retailers Association National Childrens Wear Association* National Shoe Retailers Council Shoe and Allied Trades Research Association Textile and Clothing Contractors Association* Textile Research Council* The organizations marked with an asterisk in th
7、e above list, together with the following, were directly represented on the Technical Committee entrusted with the preparation of this British Standard: Association of Retail Distributors Co-operative Union Overall Manufacturers Association of Great Britain Shirt, Collar and Tie Manufacturers Federa
8、tion Textile Distributors Association Amendments issued since publication Amd. No.Date of issueComments 4039May 1982Indicated by a sideline in the margin Licensed Copy: sheffieldun sheffieldun, na, Wed Dec 06 12:50:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6185:1982 BSI 03-1999i Contents Page
9、 Cooperating organizationsInside front cover Forewordii 0Introduction1 1Scope1 2References1 3Definitions1 4Control dimensions1 5Size designation1 6Labelling2 Appendix A Examples of garments3 Figure 1 Examples of labels for mens outerwear4 Figure 2 Examples of labels for mens underwear5 Publications
10、referred toInside back cover Licensed Copy: sheffieldun sheffieldun, na, Wed Dec 06 12:50:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6185:1982 ii BSI 03-1999 Foreword This British Standard has been prepared under the direction of the Clothing Standards Committee. The information in this standa
11、rd is taken from two international standards ISO 3636-1977 and ISO 4415-1981, published by the International Organization for Standardization (ISO) and developed by ISO/TC 133, Sizing systems and designations for clothes. The information on boys wear given in these two international standards is con
12、tained in BS 3728. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This
13、document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. License
14、d Copy: sheffieldun sheffieldun, na, Wed Dec 06 12:50:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6185:1982 BSI 03-19991 0 Introduction This British Standard is one of a series which deals essentially with the size designation of clothing, and is not directly concerned with sizing systems as su
15、ch. The primary aim of this and other British Standards in this series, is the establishment of a size designation system that indicates (in a simple, direct and meaningful manner) the body size of the man that a garment is intended to fit. Provided that the shape of his body (as indicated by the ap
16、propriate dimensions) has been accurately determined, this system will facilitate the choice of garments that fit. The size designation of the system is based on body and not garment measurements. Choice of garment measurements is normally left to the designer and the manufacturer, who are concerned
17、 with style, cut and other fashion elements, and who must make due allowance for garments normally worn beneath a specific garment. Definitions and body measurement procedure are prescribed in BS 5511, which is applicable to all categories of clothing. 1 Scope This British Standard specifies a syste
18、m of designating the sizes of mens garments that are classified as: a) covering the upper body only, or b) covering the lower body only, or c) covering the whole body, and it applies to civilian and uniform garments.1) Both control dimensions on which the size designation system is based and the met
19、hod of indicating the size designation on a garment label are specified. 2 References The titles of the publications referred to in this standard are listed on the inside back cover. 3 Definitions For the purposes of this British Standard the definitions given in BS 5511, together with the following
20、, apply. man a male person whose growth in height is finished 4 Control dimensions 4.1 Outerwear (including knitwear and swimwear). The control dimensions shall be as follows. a) Mens garments covering the upper or the whole body b) Mens garments covering the lower body only 4.2 Underwear (including
21、 nightwear and shirts). The control dimensions shall be as follows. a) Mens garments covering the upper body only b) Mens garments covering the whole body 1) Chest girth 2) Waist girth 3) Height c) Mens garments covering the lower body only Waist girth 5 Size designation 5.1 The size designation of
22、each garment shall comprise the control dimensions (see clause 4), in centimetres, of the intended wearer of that garment. Where practicable, the standard pictogram, as given in BS 5511, should be used as a means of indicating the size designation. Where it is not practicable to use the standard pic
23、togram, the numerical value of the control dimensions shall be given, together with the descriptive words such as chest girth, waist girth, etc. alongside, in the order in which they are given in clause 4. NOTEThe above requirements do not preclude the use in exceptional instances of: a) size design
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS 6185 1982
链接地址:https://www.31doc.com/p-3772610.html