BS-5551-1.3-1984 ISO-7409-1984.pdf
《BS-5551-1.3-1984 ISO-7409-1984.pdf》由会员分享,可在线阅读,更多相关《BS-5551-1.3-1984 ISO-7409-1984.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 5551-1.3: 1984 ISO 7409:1984 Fertilizers Part 1: Terminology and labelling Section 1.3 Specification for marking of containers (packages, drums, etc.) and labels ISO title: Fertilizers Marking Presentation and declarations UDC 631.8:621.798.1 + 676.811-777.1 Licensed Copy: sheffi
2、eldun sheffieldun, na, Mon Dec 04 13:48:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5551-1.3:1984 This British Standard, having been prepared under the direction of the Chemicals Standards Committee, was published under the authority of the Board of BSI and comes into effect on 30 November 1984
3、 BSI 10-1999 The following BSI references relate to the work on this standard: Committee reference CIC/37 Draft for comment 81/54774 DC ISBN 0 580 14055 5 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Chemicals Standards Committee (CIC
4、/-) to Technical Committee CIC/37 upon which the following bodies were represented: Association of Public Analysts British Agrochemicals Association Department of Trade and Industry (Laboratory of the Government Chemist) Fertiliser Manufacturers Association Ltd. Institute of Trading Standards Admini
5、stration Ministry of Agriculture, Fisheries and Food Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:48:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5551-1.3:1984 BSI 10-1999i Contents Page Committees responsibleInside f
6、ront cover National forewordii 1Scope and field of application1 2Principle1 3General requirements1 4Pre-marked containers1 5Labels2 6Example of declarations2 Table 1 Ratio of the three sizes of characters1 Table 2 Sizes of characters for declarations1 Publications referred toInside back cover Licens
7、ed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:48:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5551-1.3:1984 ii BSI 10-1999 National foreword This British Standard has been prepared under the direction of the Chemicals Standards Committee in order to standardize terminology and labelling, s
8、ampling and methods of physical and chemical testing for fertilizers. For some years the UK has participated in the standardization of terminology and labelling of fertilizers through Subcommittee 1, Terminology and labelling, of Technical Committee 134, Fertilizers and soil conditioners, of the Int
9、ernational Organization for Standardization (ISO). As international agreement is reached, it is proposed to publish the International Standards as Sections of BS 5551. BS 5551 is to be published in four Parts, each Part being subdivided into Sections and, where appropriate, Subsections. The four Par
10、ts are: Part 1: Terminology and labelling; Part 2: Sampling; Part 3: Physical properties; Part 4: Chemical analysis. This Section of Part 1 is identical with ISO 7409:1984 “Fertilizers Marking Presentation and declarations” published by ISO. Terminology and conventions. The text of the International
11、 Standard has been approved as suitable for publication as a British Standard without deviation. Some terminology and certain conventions are not identical with those used in British Standards; attention is drawn especially to the following. The comma has been used as a decimal marker. In British St
12、andards it is current practice to use a full point on the baseline as the decimal marker. Wherever the words “International Standard” appear, referring to this standard, they should be read as “British Standard”. Cross-reference. ISO 8157, which is referred to in clause 1, note 2, is in course of pr
13、eparation. When published, it is expected that it will be issued as a Section of BS 5551. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not o
14、f itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This wil
15、l be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Mon Dec 04 13:48:19 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5551-1.3:1984 BSI 10-19991 1 Scope and field of application This International Standard specifies the procedure for marking c
16、ontainers or labels for fertilizers, where national legislation permits. It is applicable to all fertilizers in containers. NOTE 1The spelling “fertiliser” is recognized but the spelling “fertilizer” is preferred and is used throughout. NOTE 2Attention is drawn to ISO 8157, Fertilizers and soil cond
17、itioners Vocabulary, 1) which defines terminology used in this International Standard. 2 Principle Establishment of the label size, the position of the declarations and the size of the characters (letters and figures) so as to enable the user to identify the fertilizer and to determine its character
18、istics. These details will vary according to whether the container holds: more than 25 kg (or 25 l) of fertilizer, or from 5 to 25 kg (or 5 to 25 l) of fertilizer, or less than 5 kg (or 5 l) of fertilizer. 3 General requirements Declarations shall be legibly and indelibly marked on a uniform and con
19、trasting background. 4 Pre-marked containers 4.1 Containers holding more than 25 kg (or 25 l) of fertilizer 4.1.1 Position and area of space for marking A rectangular space, the total area of which shall be at least 10 % of the face selected, shall be provided on one of the main faces of the contain
20、er. Declarations shall be marked within this area. The edges of the space shall be parallel to the edges of the container. NOTEIt is recommended that the type and grade be also marked on the sides or gussets of non-rigid containers. 4.1.2 Sizes of characters Three sizes of characters shall be used,
21、according to the area of the space for marking (4.1.1), so that the text can be set out clearly. These three sizes shall be in a ratio X/Y/Z which may vary only within the limits indicated in Table 1. The smallest letters shall have a height of at least 5 mm. The size of lower-case characters shall
22、be determined by the height of the letters without a down stroke (for example e, o, u, n). The height of upper-case characters shall be typographically consistent with the height of the lower-case characters. Table 1 Ratio of the three sizes of characters 4.1.3 Sizes of characters for declarations T
23、he declarations shall be printed in characters corresponding to the type sizes given in Table 2. 4.2 Containers holding from 5 to 25 kg (or 5 to 25 l) of fertilizer All requirements specified in 4.1 shall be followed, except that the smallest characters shall have a height of at least 3 mm. Table 2
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-5551-1.3-1984 ISO-7409-1984 BS 5551 1.3 1984 ISO 7409
链接地址:https://www.31doc.com/p-3772703.html