BS-5829-1979 ISO-3287-1978.pdf
《BS-5829-1979 ISO-3287-1978.pdf》由会员分享,可在线阅读,更多相关《BS-5829-1979 ISO-3287-1978.pdf(14页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 5829:1979 ISO 3287:1978 Specification for Control symbols for powered industrial trucks ISO title: Powered industrial trucks Control symbols UDC 621.868.2:629.1.018:003.62 Licensed Copy: sheffieldun sheffieldun, na, Fri Dec 01 09:58:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI B
2、S 5829:1979 This British Standard, having been prepared under the direction of the Mechanical Engineering Standards Committee, was published under the authority of the Executive Board and comes into effect on 31 December 1979 BSI 11-1999 The following BSI references relate to the work on this standa
3、rd: Committee reference MEE/112 Draft for comment 73/35437 DC ISBN 0 580 11076 1 Cooperating organizations The Mechanical Engineering Standards Committee, under whose direction this British Standard was prepared, consists of representatives from the following Government departments and professional
4、and industrial organizations: The organizations marked with an asterisk in the above list, together with the following, were directly represented on the committee entrusted with the preparation of this British Standard: Associated Offices Technical Committee*Department of Trade (Marine Division) Ass
5、ociation of Consulting EngineersDepartment of Transport Association of Hydraulic Equipment Electricity Supply Industry in England Manufacturersand Wales Association of Mining Electrical and Engineering Equipment Users Association* Mechanical EngineersFederation of Manufacturers of Construction Briti
6、sh Compressed Air SocietyEquipment and Cranes British Electrical and Allied Manufacturers Health and Safety Executive* Association (BEAMA)Institution of Gas Engineers British Gas CorporationInstitution of Mechanical Engineers British Gear Manufacturers AssociationInstitution of Plant Engineers Briti
7、sh Internal Combustion Engine Institution of Production Engineers Manufacturers AssociationLloyds Register of Shipping British Pump Manufacturers AssociationLondon Transport Executive British Steel CorporationMachine Tool Industry Research Association British Steel IndustryMinistry of Defence* Briti
8、sh Valve Manufacturers Association Ltd.National Coal Board Chartered Institution of Building ServicesOil Companies Materials Association Crown Agents for Oversea Governments and Process Plant Association AdministrationsSociety of Motor Manufacturers and Department of the Environment (PSA)Traders Lim
9、ited Department of Industry, Mechanical Telecommunication Engineering and Engineering*Manufacturing Association (TEMA) Department of Industry, National Engineering Water-tube Boilermakers Association Laboratory British Industrial Truck AssociationContractors Plant Association British Ports Associati
10、onCranfield Institute of Technology Castor Manufacturers (UK) AssociationFood Manufacturers Federation Incorporated Chemical Industries AssociationMetal Packaging Manufacturers Association Amendments issued since publication Amd. No.Date of issueComments Licensed Copy: sheffieldun sheffieldun, na, F
11、ri Dec 01 09:58:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5829:1979 BSI 11-1999i Contents Page Cooperating organizationsInside front cover Forewordii 1Scope and field of application1 2Reference1 3Reproduction of the symbols1 Section 1. Symbols for load handling 4Use of symbols1 5Illustration
12、of load handling symbols3 Section 2. Symbols for other operational controls involving action 6Use of symbols4 7Illustration of symbols for other operational controls involving action5 Section 3. Symbols for information or identification only 8Use of symbols6 9Illustration of symbols for information
13、of identification only6 Annex Typical applications8 Table Relationship of button and lever motions2 Publications referred toInside back cover Licensed Copy: sheffieldun sheffieldun, na, Fri Dec 01 09:58:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5829:1979 ii BSI 11-1999 National foreword This
14、British Standard has been prepared under the direction of the Mechanical Engineering Standards Committee. BS 5829 is identical with ISO 3287 “Powered industrial trucks Control symbols” published by the International Organization for Standardisation (ISO). ISO 3287 was drawn up by Technical Committee
15、 ISO/TC110, Industrial trucks. Terminology and conventions. The text of the International Standard has been approved as suitable for publication, without deviation, as a British Standard. Some terminology and certain conventions are not identical with those used in British Standards; attention is es
16、pecially drawn to the following. Wherever the words “International Standard” appear, referring to this standard, they should be read as “British Standard”. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their
17、correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Cross-references International StandardCorresponding British Standard ISO 1000:1973BS 5555:1976 SI units and recommendations for use of their multiples and of certain other units (Ident
18、ical) ISO 3691:1977BS 4430 Safety of powered industrial trucks Part 1:1969 Manufacture Part 2:1969 Operation and maintenance (Related) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 8, an inside back cover and a back cover. This standard has
19、 been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Fri Dec 01 09:58:48 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 5829:1979 BSI 11-19991 1 Scope and field
20、 of application This International Standard defines symbols which will provide for the development of symbolic language of operator controls on powered industrial trucks. The symbols are divided into 3 sections: Section 1: Symbols for load handling; Section 2: Symbols for other operational controls
21、involving action; Section 3: Symbols for information or identification only. 2 Reference ISO 3691, Powered industrial trucks Safety code. 3 Reproduction of the symbols Reproduction, including enlargement or reduction of symbol size, should be by a photographic or similar process to retain exact prop
22、ortion and line thickness. In order to comply with national standards, changes in proportion of the symbols are permitted, but such changes shall not alter or modify the substantive contents and meaning of the symbol. Section 1. Symbols for load handling 4 Use of symbols 4.1 Symbols shall be durable
23、 and provide contrast with surrounding materials. 4.2 Symbols shall be located on or adjacent to the control lever for the function depicted in a manner to avoid confusion or misunderstanding. 4.3 The direction of movement of controls in relation to the movement of parts or function controlled are s
24、et forth in ISO 3691. These motions may be categorized as follows: 4.4 The location and arrangement of push-buttons when used to control movement of parts or function controlled are set forth in ISO 3691. These arrangements may be related to the corresponding movement of levers in such a manner that
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-5829-1979 ISO-3287-1978 BS 5829 1979 ISO 3287 1978
链接地址:https://www.31doc.com/p-3772805.html