BS-6912-16-1995 ISO-13333-1994.pdf
《BS-6912-16-1995 ISO-13333-1994.pdf》由会员分享,可在线阅读,更多相关《BS-6912-16-1995 ISO-13333-1994.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 6912-16: 1995 ISO 13333: 1994 Safety of earth-moving machinery Part 16: Specification for dumper body support and operators cab tilt support devices Licensed Copy: sheffieldun sheffieldun, na, Wed Dec 06 12:37:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6912-16:1995 This Bri
2、tish Standard, having been prepared under the direction of the Sector Board for Building and Civil Engineering, was published under the authority of the Standards Board and comes into effect on 15 August 1995 BSI 08-1999 The following BSI references relate to the work on this standard: Committee ref
3、erence B/513/1 Draft for comment 93/105239 DC ISBN 0 580 24289 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee B/513, Construction equipment and plant, and site safety, to Subcommittee B/513/1, Earth-moving machinery, u
4、pon which the following bodies were represented: British Coal Corporation Construction Plant Hire-Association Federation of Civil Engineering Contractors Federation of Manufacturers of Construction Equipment and Cranes Health and Safety Executive Institution of Civil Engineers Silsoe Research Instit
5、ute Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Wed Dec 06 12:37:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6912-16:1995 BSI 08-1999i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2Normative reference
6、s1 3Definitions1 4Performance requirements1 5Other requirements1 6Test2 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Wed Dec 06 12:37:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6912-16:1995 ii BSI 08-1999 National foreword This Part of BS 6912 has been prepar
7、ed by Subcommittee B/513/1 and is identical with ISO 13333:1994 Earth-moving machinery Dumper body support and operators cab tilt support devices, published by the International Organization for Standardization (ISO). ISO 13333:1994 was prepared by Subcommittee 2, Safety requirements and human facto
8、rs, of ISO Technical Committee 127, Earth-moving machinery, with the active participation and approval of the UK. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a Bri
9、tish Standard does not of itself confer immunity from legal obligations. Cross-reference International StandardCorresponding British Standard BS 6914 Terminology (including definitions of dimensions and symbols) for earth-moving machinery ISO 6165:1987Part 1:1988 Glossary of terms for basic types of
10、 earth-moving machinery (Identical) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicate
11、d in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Wed Dec 06 12:37:08 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6912-16:1995 BSI 08-19991 1 Scope This International Standard specifies the performance and test requirements for mechanical support devic
12、es for dumper bodies, dumper body substitutes and operators cabs on earth-moving machines as defined in ISO 6165, equipped with a lift support where it is required that the dumper body, dumper body substitute or operators cab be held in a raised or tilted position for maintenance, servicing or other
13、 non-operational purposes. It also specifies installation instructions, storage and colour requirements for such dumper body and operator cabin tilt support devices. 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this
14、International Standard. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below
15、. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 6165:1987, Earth-moving machinery Basic types Vocabulary. 3 Definitions For the purposes of this International Standard, the following definitions apply. 3.1 dumper body body of a dumper which transports eart
16、h or other loose materials 3.2 dumper body substitute device which can be used in place of the dumper body, e.g. tanks, unit-load-handling devices equipped with a hook 3.3 operators cab enclosure on the earth-moving machine from where the machine is operated 3.4 mechanical support device(s) one or m
17、ore links, cables, bars or structures including attachment points and parts, designed to support the dumper body, dumper body substitute or operators cab 3.5 working circuit pressure that nominal pressure applied to the specific circuit by the pump(s) 3.6 dumper body mass; dumper body substitute mas
18、s; operators cab mass mass of the dumper body, dumper body substitute or operators cab which is supported by the device 4 Performance requirements The mechanical support device for the dumper body, dumper body substitute and/or operators cab shall be designed: a) to withstand the static load imposed
19、 by the lowering force, i.e. 1,2 times the working circuit pressure, plus a force which corresponds to the mass of the empty dumper body, dumper body substitute or operators cab, and the mass of any attachments, arms and linkage acting on the support device; b) for systems that do not have a lowerin
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-6912-16-1995 ISO-13333-1994 BS 6912 16 1995 ISO 13333 1994
链接地址:https://www.31doc.com/p-3772892.html