BS-6912-18-1995 ISO-12508-1994.pdf
《BS-6912-18-1995 ISO-12508-1994.pdf》由会员分享,可在线阅读,更多相关《BS-6912-18-1995 ISO-12508-1994.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 6912-18: 1995 ISO 12508: 1994 Safety of earth-moving machinery Part 18: Specification for bluntness of edges at the operator station and in maintenance areas Licensed Copy: sheffieldun sheffieldun, na, Wed Dec 06 12:42:27 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6912-18:1995
2、 This British Standard, having been prepared under the direction of the Sector Board for Building and Civil Engineering, was published under the authority of the Standards Board and comes into effect on 15 August 1995 BSI 07-1999 The following BSI references relate to the work on this standard: Comm
3、ittee reference B/513/1 Draft for comment 93/102480 DC ISBN 0 580 24291 9 Committees responsible for this British Standard The preparation of this British Standard was entrusted by Technical Committee B/513, Construction equipment and plant, and site safety, to Subcommittee B/513/1, Earth-moving mac
4、hinery, upon which the following bodies were represented: British Coal Corporation Construction Plant-Hire Association Federation of Civil Engineering Contractors Federation of Manufacturers of Construction Equipment and Cranes Health and Safety Executive Institution of Civil Engineers Silsoe Resear
5、ch Institute Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Wed Dec 06 12:42:27 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6912-18:1995 BSI 07-1999i Contents Page Committees responsibleInside front cover National forewordii 1Scope1 2Normative
6、references1 3Requirements1 Figure 1 Edges and corner1 Figure 2 Edge radius and chamfer2 List of referencesInside back cover Licensed Copy: sheffieldun sheffieldun, na, Wed Dec 06 12:42:27 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6912-18:1995 ii BSI 07-1999 National foreword This Part of BS 6912
7、 has been prepared by Subcommittee B/513/1, and is identical with ISO 12508:1994 Earth-moving machinery Operator station and maintenance areas Bluntness of edges, published by the International Organization for Standardization (ISO). ISO 12508:1994 was prepared by Subcommittee 2, Safety requirements
8、 and human factors, of ISO Technical Committee 127, Earth-moving machinery, with the active participation and approval of the UK. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compl
9、iance with a British Standard does not of itself confer immunity from legal obligations. Cross-references International standardCorresponding British Standard BS 6914 Terminology (including definitions of dimensions and symbols) for earth-moving machinery ISO 6165:1987Part 1:1988 Glossary of terms f
10、or basic types of earth-moving machinery (Identical) BS 6912 Safety of earth-moving machinery ISO 2860:1992Part 5:1992 Recommendations for minimum access dimensions (Identical) ISO 2867:1994Part 15:1995 Specification for access systems (Identical) Summary of pages This document comprises a front cov
11、er, an inside front cover, pages i and ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffield
12、un, na, Wed Dec 06 12:42:27 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6912-18:1995 BSI 07-19991 1 Scope This International Standard defines the permissible limits of the sharpness of edges and corners, to reduce the risk of injury to the operator or maintenance personnel while operating earth-mo
13、ving machinery and performing maintenance. It applies to operator and maintenance access/egress systems as defined in ISO 2860 and ISO 2867, and the operator station on earth-moving machinery as described in ISO 6165. 2 Normative references The following standards contain provisions which, through r
14、eference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-6912-18-1995 ISO-12508-1994 BS 6912 18 1995 ISO 12508 1994
链接地址:https://www.31doc.com/p-3772902.html