BS-63-1-1987.pdf
《BS-63-1-1987.pdf》由会员分享,可在线阅读,更多相关《BS-63-1-1987.pdf(8页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 63-1:1987 Road aggregates Part 1: Specification for single-sized aggregate for general purposes UDC 625.07 Licensed Copy: London South Bank University, London South Bank University, Thu Dec 07 02:36:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 63-1:1987 This British Standard,
2、 having been prepared under the direction of the Road Engineering Standards Committee, was published under the authority of the Board of BSI and comes into effect on 30 October 1987 BSI 01-1999 First published as BS 63-2, 1971 First revision as BS 63-1, incorporating BS 1984:1967, October 1987 The f
3、ollowing BSI references relate to the work on this standard: Committee reference RDB/1 Draft for comment 85/13853 DC ISBN 0 580 15673 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Road Engineering Standards Committee (RDB/-) to Techn
4、ical Committee RDB/1, upon which the following bodies were represented: British Aggregate Construction Materials Industries British Tar Industry Association County Surveyors Society Department of Transport (Highways) Federation of Manufacturers of Construction Equipment and Cranes Greater London Cou
5、ncil Institution of Highways and Transportation Natural Environment Research Council (Institute of Geological Science) Road Emulsion Association Ltd. Road Surface Dressing Association Sand and Gravel Association Limited Society of Chemical Industry Amendments issued since publication Amd. No.Date of
6、 issueComments Licensed Copy: London South Bank University, London South Bank University, Thu Dec 07 02:36:28 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 63-1:1987 BSI 01-1999i Contents Page Committees responsibleInside front cover Forewordii 1Scope1 2Definitions1 3Specified size1 4Sampling and te
7、sting1 5Grading and flakiness index limits1 Table 1 Specified sizes for given nominal sizes1 Table 2 Grading limits, specified size and maximum flakiness index2 Publications referred toInside back cover Licensed Copy: London South Bank University, London South Bank University, Thu Dec 07 02:36:28 GM
8、T+00:00 2006, Uncontrolled Copy, (c) BSI BS 63-1:1987 ii BSI 01-1999 Foreword This British Standard has been prepared under the authority of the Road Engineering Standards Committee and is a revision as one standard in two Parts of the two standards BS 63-2:19711) and BS 1984:19672) both of which ar
9、e now withdrawn. For ease of use the number BS 63 is being retained. BS 63-1:19511) is also withdrawn. The two Parts are: Part 1: Specification for single-sized aggregate for general purposes; Part 2: Specification for single-sized aggregate for surface dressing. Particle size distribution is presen
10、ted as a continuous grading with specified limits on percentages of material passing selected sieve sizes in order to unify the specification of aggregates with other British Standards, e.g. BS 594 and BS 4987. Requirements for aggregate soundness and the determination of the clay content of fine ag
11、gregates are not included in this revision because suitable test methods are not available, though the sedimentation test described in BS 812-1 may offer some guidance in terms of particle size distribution. Reference should be made to BS 812-101 for general guidance on testing aggregates, precision
12、 of test methods and variance arising from sampling errors. For lightly trafficked roads some authorities may consider aggregates in accordance with BS 63-1 to be adequate for use as surface dressing; production of surface dressing aggregates will usually involve washing of the aggregate after scree
13、ning. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comp
14、rises a front cover, an inside front cover, pages i and ii, pages 1 and 2, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. 1) BS 63 Single-siz
15、ed roadstone and chippings BS 63-1:1951 Imperial units BS 63-2:1971 Metric units 2) BS 1984:1967 Gravel aggregates for surface treatment (including surface dressings) on roads. Licensed Copy: London South Bank University, London South Bank University, Thu Dec 07 02:36:28 GMT+00:00 2006, Uncontrolled
16、 Copy, (c) BSI BS 63-1:1987 BSI 01-19991 1 Scope This Part of BS 63 specifies grading and flakiness index for nominally single-sized aggregates, i.e. aggregates containing a major proportion of single-sized particles, for use in the construction and maintenance of roads. NOTEThe titles of the public
17、ations referred to in this standard are listed on the inside back page. 2 Definitions For the purposes of this Part of BS 63 the following definitions apply. 2.1 specified size the single size which forms the major proportion of the single-sized aggregate NOTESee clause 3. 2.2 nominal size the name
18、given to a particular size of aggregate NOTE 1Usually this is the smallest size of test sieve in accordance with BS 410 through which at least 85 % of the aggregate passes but, where the appropriate test sieve size is not a whole number, the nominal size is given as the whole number nearest to that
19、size of test sieve. NOTE 2See Table 1. 3 Specified size 3.1 The specified sizes for given nominal sizes shall be as given in Table 1. Table 1 Specified sizes for given nominal sizes 3.2 The percentage aggregate of specified size shall be not less than that given in Table 2(b). 4 Sampling and testing
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS 63 1987
链接地址:https://www.31doc.com/p-3772963.html