ISO-10545-6-1995.pdf
《ISO-10545-6-1995.pdf》由会员分享,可在线阅读,更多相关《ISO-10545-6-1995.pdf(8页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD IS0 10545-6 First edition 1995-I l-01 Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles Carreaux et dales c h is the thickness, in millimetres, of the rotating disc; d is the diameter, in millimetres, of the rotating disc; L is the length,
2、 in millimetres. of the chord. Some equivalent values of L and V are given in table 1. 8 Test report The test report shall include the following information: a) b) cl d) e) reference to this part of IS0 10545; a description of the tiles; the chord length L of each groove, to the nearest 03 mm; the v
3、olume V, in cubic millimetres, for each indi- vidual groove; the average volume V, in cubic millimetres. Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/26/2007 00:31:20 MDTNo reproducti
4、on or networking permitted without license from IHS -,-,- 0 IS0 IS0 10545-6: 1995(E) Steel wheet Figure 1 - Schematic diagram of deep abrasion equipment 3 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 No
5、t for Resale, 04/26/2007 00:31:20 MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 10545-6:1995(E) 0 IS0 L L Figure 2 - Figure 2 - Definition of the chord Definition of the chord Table 1 Table 1 -Equivalent values -Equivalent values L V L V L V L V L V mm mm3 mm mm3 mm m
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 10545 1995
链接地址:https://www.31doc.com/p-3773890.html