ISO-10561-1999.pdf
《ISO-10561-1999.pdf》由会员分享,可在线阅读,更多相关《ISO-10561-1999.pdf(18页珍藏版)》请在三一文库上搜索。
1、B C Reference number ISO/IEC 10561:1999(E) INTERNATIONAL STANDARD ISO/IEC 10561 Second edition 1999-05-01 Information technology Office equipment Printing devices Method for measuring throughput Class 1 and Class 2 printers Technologies de linformation quipements de bureau Dispositifs dimpression Mt
2、hode de mesurage de la capacit Imprimantes de classes 1 et 2 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/20/2007 05:09:01 MDTNo reproduction or networking permitted without license f
3、rom IHS -,-,- ISO/IEC 10561:1999(E) ISO/IEC 1999 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. I
4、SO/IEC Copyright Office Case postale 56 CH-1211 Genve 20 Switzerland Printed in Switzerland ii Contents 1 Scope1 2 Normative references1 3 Conformance1 4 Test principles1 5 Test conditions2 6 Letter test3 7 Spreadsheet test3 8 Graphics test4 9 Test report4 Annex A - Presentation of test results5 Ann
5、ex B - Letter test patterns6 Annex C - Spreadsheet test pattern9 Annex D - Graphic test pattern11 Annex E - Classification of printers - Classes 1 and 212 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 No
6、t for Resale, 04/20/2007 05:09:01 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO/IEC ISO/IEC 10561:1999(E) iii Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worl
7、dwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate i
8、n fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. Draft International Standards a
9、dopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. International Standard ISO/IEC 10561 was prepared by Joint Technical Committee ISO/IEC JTC 1, Infor
10、mation technology, Subcommittee SC 28, Office equipment. This second edition cancels and replaces the first edition (ISO/IEC 10561:1991), which has been technically revised. Annexes A, B, C and D form an integral part of this International Standard. Annex E is for information only. Copyright Interna
11、tional Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/20/2007 05:09:01 MDTNo reproduction or networking permitted without license from IHS -,-,- Copyright International Organization for Standardization Provide
12、d by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/20/2007 05:09:01 MDTNo reproduction or networking permitted without license from IHS -,-,- INTERNATIONAL STANDARD ISO/IECISO/IEC 10561:1999(E) 1 Information technology Office equipment Printing devices
13、Method for measuring throughput Class 1 and Class 2 printers 1Scope This International Standard specifies a method for measuring the throughput of class 1 and class 2 printers, as defined in ISO/IEC 11160-1. This International Standard specifies three different test patterns: a standard business let
14、ter; a spreadsheet; a graphic pattern. In addition, this International Standard defines a method for a performance test and one for an endurance test. These tests are intended to measure only the printer throughput for documents in the same class as the test patterns and not to evaluate any other pr
15、inter features such as character shaping, print compressions, network/controller performance, colour, etc. The method is relevant to class 1 and class 2 printer types (e.g. dot matrix, daisy wheel, ink jet, thermal transfer printers) and to all configurations (e.g. tractor feed, cut sheet feed, 80-c
16、olumn and over 132-column print width, etc.). It is not the most suitable for comparing performance of other classes of printing devices such as high-speed page-oriented printers or color printers. This method is intended for use by printer manufacturers and test houses so that a common form of test
17、 result presentation shall be obtained. It will also enable a user to make a quick and easy comparison of the printing throughput of different printers. 2Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International
18、 Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members
19、 of IEC and ISO maintain registers of currently valid International Standards. ISO/IEC 11160-1:1995, Information techology, Office equipment - Minimum information to be included in specification sheets - Part 1: Class 1 and Class 2 printers. DIN 32751 - Bro- und Datentechnik - Drucker - Ermittlung d
20、er Druckleistung bezogen auf Prfvorlagen. 3Conformance Test results claimed to be in conformance with this International Standard shall have been obtained in accordance with the method specified in this International Standard. 4Test principles 4.1General For each test the specified test pattern shal
21、l be printed a number of times on the device under test. A test shall be performed under the conditions specified in clause 5. The initial set-up conditions for the printer shall be as described under each individual test. Once started a test shall be performed without interruption. The performance
22、tests are designed to enable measurement of the printer under typical user application print tasks. The endurance tests are designed to show any effects of extended high duty print tasks on printing throughput, due to any limiting factors within the printer (for example, dot density limitations, tem
23、perature rises, etc.). For both types of test the throughput unit shall be “printed pages per hour“ and shall be calculated by means of the formula: Number of printed pages x 3600 s/h Measured time in seconds Copyright International Organization for Standardization Provided by IHS under license with
24、 ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/20/2007 05:09:01 MDTNo reproduction or networking permitted without license from IHS -,-,- ISO/IEC 10561:1999(E) ISO/IEC 2 4.2Performance test In the performance tests the test pattern shall be transmitted from the host system fi
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 10561 1999
链接地址:https://www.31doc.com/p-3773891.html