《ISO-10599-1-1992.pdf》由会员分享,可在线阅读,更多相关《ISO-10599-1-1992.pdf(5页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD IS0 10599-l First edition 1992-l I-01 Car radios - Coaxial aerial connectors - Part 1: Dimensions Autoradios - Raccords coaxiaux dantenne - Parfie I: Dimensions Reference number IS0 10599-I :1992(E) Copyright International Organization for Standardization Provided by IHS under
2、 license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/28/2007 06:45:37 MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 10599-1:1992(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national s
3、tandards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International
4、organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees
5、 are circulated to the member bodies for voting. Publication as an Inter- national Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 10599-I was prepared by Technical Commit- tee tSO/TC 22, Road vehicles. IS0 10599 consists of the following p
6、arts, under the general title Car ra- dios - Coaxial aerial connectors: - Part I: Dimensions - Part 2: Characteristic values, performance requirements and tests 0 IS0 1992 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechan
7、lcal, including photocopying and mlcrofilm, without permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1211 Genkve 20 l Switzerland Prlnted in Switzerland ii Copyright International Organization for Standardization Provided by IHS under lice
8、nse with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/28/2007 06:45:37 MDTNo reproduction or networking permitted without license from IHS -,-,- INTERNATIONAL STANDARD IS0 10599-1:1992(E) Car radios - Coaxial aerial connectors - Part 1: Dimensions 1 Scope This part of IS0 10
9、599 lays down dimensional specifications of the plug and socket for the coaxial aerial connector of car radios for mounting in road vehicles. 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this part of IS0 10599. At th
10、e titne of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this part of IS0 10599 are encouraged to investi- gate the possibility of applying the most recent edi- tion of the standard indicated below. Members of IEC and IS0 main
11、tain registers of currently valid International Standards. IS0 10599-2:-l, Car radios - Coaxial aer-ial connec- fors - Part 2: Characferisfic values, perfortnance reqirirements and tests. Details of the aerial connector not specified are IelI to the manufacturer. The design of the plug shall ensure
12、that, when making the connection, the outer contacts and the plug housing are centred before the pin comes into contact with the tube of the socket. The connector shall meet the performance require- ments in IS0 10599-2. 3.2 Plug Requirements for the aerial connector plug shall be as shown in figure
13、 1. 3.3 Socket Requirements for the aerial connector socket shall be as shown in figure2. 4 Designation An aerial connector plug which meets the require- ments of this International Standard shall be desig- nated: 3 Dimensions Plug IS0 10599 3.1 General The aerial connector shall tneet the dimension
14、al specifications shown in figures 1 and 2 to ensure interchangeability, An aerial connector socket which meets the re- quirements of this International Standard shall be designated: Socket IS0 10599 1) To be published. 1 Copyright International Organization for Standardization Provided by IHS under
15、 license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/28/2007 06:45:37 MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 10599-1:1992(E) Dimensions in millimetres Dimensions in millimetres Outer contact Outer contact Inner contact -, 23 max.
16、Reference plane X Contact reference plane I - Reference plane I) Other forms, such as conical, are allowed. Figure 2 - Aerial connector socket Figure 1 - Aerial connector plug Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Stan
17、dards 1/9972545001 Not for Resale, 04/28/2007 06:45:37 MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 10599-1:1992(E) UDC 629.1.018.7:621.396.676:621.315.687 Descriptors: road vehicles, radio equipment, antenna conductors, connectors, dimensions. Price based on 2 pages Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/28/2007 06:45:37 MDTNo reproduction or networking permitted without license from IHS -,-,-
链接地址:https://www.31doc.com/p-3773894.html