ISO-10654-1993.pdf
《ISO-10654-1993.pdf》由会员分享,可在线阅读,更多相关《ISO-10654-1993.pdf(6页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD IS0 10654 First edition 1993-04-I 5 Light-gauge metal containers - Round open-top cans - Cans for liquid products with added gas, defined by their nominal filling volumes Emballages mhalliques kgers - Boites rondes set-ties - Boites pour produits liquides avec addition de gaz,
2、 d6finies par leur volume nominal de remplissage Reference number IS0 10654:1993!E) Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/27/2007 21:06:24 MDTNo reproduction or networking perm
3、itted without license from IHS -,-,- IS0 10654:1993(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees.
4、 Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and nongovernmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the Internat
5、ional Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodi
6、es casting a vote. International Standard IS0 10654 was prepared by Technical Committee lSO/TC 52, Light gauge metal containers. Sub-Committee SC 4, Open fop containers. Together with IS0 10653, lSO/TR 11761, lSO/TR 11762 and lSO/TR 11776, this first edition of IS0 10654 cancels and replaces IS0 300
7、4-I :1986, IS0 30042:1989, IS0 30043:1986, IS0 3004-4:1986, IS0 3004-5:1988 and IS0 3004-6:1986, which have been revised and condensed. Annex A of this international Standard is for information only. 0 IS0 1993 All rights reserved. No part of this publication may be reproduced or utilized in any for
8、m or by any means, electronic or mechanical, including phOtoc0pying and microfilm, without per- mission in writing from the publisher. International Organization for Stendardizstion Case Postale 56 . CH-1211 Genbve 20 l Switzsriand Printed in Switzerland ii Copyright International Organization for S
9、tandardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/27/2007 21:06:24 MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 10654:1993(E) Introduction This International Standard replaces IS0 3004-3 for round
10、open-top cans for carbonated drinks. Round open-top cans defined by their nominal gross lidded capacity, formerly listed in IS0 3004 Parts 1 to 6, are now dealt with in IS0 10653. The nominal filling volumes given in this International Standard have been chosen to meet criteria retained in order to
11、reduce the number of stand- ardized volumes in relation to the former International Standard (IS0 3004-3). These criteria are the following: a) the can size is produced in a quantity of at least 100 million cans per annum; b) the can size was previously listed in table 1 of IS0 3004-3:1986; c) the i
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 10654 1993
链接地址:https://www.31doc.com/p-3773951.html