ISO-10791-4-1998.pdf
《ISO-10791-4-1998.pdf》由会员分享,可在线阅读,更多相关《ISO-10791-4-1998.pdf(12页珍藏版)》请在三一文库上搜索。
1、A Reference number ISO 10791-4:1998(E) INTERNATIONAL STANDARD ISO 10791-4 First edition 1998-07-01 Test conditions for machining centres Part 4: Accuracy and repeatability of positioning of linear and rotary axes Conditions dessai pour centres dusinage Partie 4: Prcision et rptabilit de positionneme
2、nt des axes linaires et rotatifs ISO 10791-4:1998(E) ISO 1998 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the
3、 publisher. International Organization for Standardization Case postale 56 CH-1211 Genve 20 Switzerland Internetisoiso.ch Printed in Switzerland ii ContentsPage 1Scope.1 2Normative references.1 3Preliminary remarks.2 3.1Measuring units2 3.2Reference to ISO 230-2.2 3.3Testing sequence.2 3.4Tests to b
4、e performed2 3.5Position of linear axes not under test .2 4Positioning of linear axes .2 4.1Tolerances.2 4.2Measuring instruments.3 4.3Observations and references to ISO 230-1 and ISO 230-2 .3 4.4Calculated deviations.3 5Positioning of rotary axes.4 5.1Tolerances.4 5.2Measuring instruments.5 5.3Obse
5、rvations and references to ISO 230-1 and ISO 230-2 .5 5.4Calculated deviations.5 6Information to be recorded.5 6.1Data identifying the machine5 6.2Data identifying the test6 6.3Data on the test conditions.6 Annex A (informative) Bibliography .7 ISOISO 10791-4:1998(E) iii Foreword ISO (the Internatio
6、nal Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been
7、established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standar
8、dization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 10791-4 was prepared by Technical Co
9、mmittee ISO/TC 39, Machine tools, Subcommittee SC 2, Test conditions for metal cutting machine tools. ISO 10791 consists of the following parts, under the general title Test conditions for machining centres: Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horiz
10、ontal Z-axis) Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis) Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis) Part 4: Accuracy and repeatability of positioni
11、ng of linear and rotary axes Part 5: Accuracy and repeatability of positioning of work-holding pallets Part 6: Accuracy of feeds, speeds and interpolations Part 7: Accuracy of a finished test piece Part 8: Evaluation of the contouring performance in the three coordinate planes Part 9: Evaluation of
12、the operating times of tool change and pallet change Part 10: Evaluation of the thermal distortions Part 11: Evaluation of the noise emission Part 12: Evaluation of the vibration severity Annex A of this part of ISO 10791 is for information only. ISO 10791-4:1998(E) ISO iv Introduction A machining c
13、entre is a numerically controlled machine tool capable of performing multiple machining operations, including milling, boring, drilling and tapping, as well as automatic tool changing from a magazine or similar storage unit in accordance with a machining programme. The object of ISO 10791 is to supp
14、ly information as wide and comprehensive as possible on tests which can be carried out for comparison, acceptance, maintenance or any other purpose. ISO 10791 specifies, with reference to the relevant parts of ISO 230, Test code for machine tools, several families of tests for machining centres with
15、 horizontal or vertical spindle or with universal heads of different types, standing alone or integrated in flexible manufacturing systems. ISO 10791 also establishes the tolerances or maximum acceptable values for the test results corresponding to general purpose and normal accuracy machining centr
16、es. ISO 10791 is also applicable, totally or partially, to numerically controlled milling and boring machines, when their configuration, components and movements are compatible with the tests described herein. -,-,- INTERNATIONAL STANDARD ISOISO 10791-4:1998(E) 1 Test conditions for machining centre
17、s Part 4: Accuracy and repeatability of positioning of linear and rotary axes 1Scope This part of ISO 10791 specifies, with reference to ISO 230-2, the tolerances which apply to the positioning tests for linear axes, up to 2 000 mm in length, and rotary axes of machining centres. It does not deal wi
18、th environmental conditions, warm-up of the machine and measuring methods, already described in ISO 230-2. 2Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 10791. At the time of publication, the editions
19、 indicated were valid. All standards are subject to revision, and parties to agreements based on this part of ISO 10791 are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid In
20、ternational Standards. ISO 230-1:1996, Test code for machine tools Part 1: Geometric accuracy of machines operating under no-load or finishing conditions. ISO 230-2:1997, Test code for machine tools Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes. ISO 1
21、0791-1:1998, Test conditions for machining centres Part 1: Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis). ISO 10791-2:1), Test conditions for machining centres Part 2: Geometric tests for machines with vertical spindle or universal heads with verti
22、cal primary rotary axis (vertical Z-axis). ISO 10791-3:1998, Test conditions for machining centres Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z-axis). _ 1) To be published. -,-,- ISO 10791-4:1998(E) ISO 2 3Preliminary remarks 3.1Measuring uni
23、ts In this part of ISO 10791, all linear dimensions, deviations and corresponding tolerances are expressed in millimetres; angular dimensions are expressed in degrees, and angular deviations and the corresponding tolerances are expressed in arc seconds. The equivalence of the following expressions s
24、hould always be kept in mind: 0,010/1 000 = 10 10-6 2 3.2 Reference to ISO 230-2 To apply this part of ISO 10791, reference shall be made to ISO 230-2, especially for the environmental conditions, warming up of the machine, description of measuring methods, evaluation and presentation of the results
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 10791 1998
链接地址:https://www.31doc.com/p-3774007.html