ISO-10935-1996.pdf
《ISO-10935-1996.pdf》由会员分享,可在线阅读,更多相关《ISO-10935-1996.pdf(8页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD First edition 1996-l 2-l 5 Optics and optical instruments - Microscopes - Interfacing connection type c Optique et instruments dop tique - Microscopes - Raccord din terface de type C Reference number IS0 10935:1996(E) Copyright International Organization for Standardization Pr
2、ovided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007 23:57:53 MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 10935:1996(E) 2 Foreword IS0 (the International Organization for eration of national standards bodies
3、( preparing International Standards is technical committees. Each member Stan dardizatio n) is a worldwide fed- IS0 member bodies). The wor k of normally carried out through IS0 body interested in a subject for which a technical committee has been established has the right to be represented on that
4、committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by t
5、he technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 10935 was prepared by Technical Committee ISO/TC 172, Optics and optical instruments, Su
6、bcommittee SC 5, Microscopes and endoscopes. 0 IS0 1996 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanicai, including photocopying and microfilm, without permission in writing from the publi
7、sher. International Organization for Standardization Case Postale 56 l CH-121 IG eneve 20 l Switzerland Printed in Switzerland ii Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007
8、23:57:53 MDTNo reproduction or networking permitted without license from IHS -,-,- INTERNATIONAL STANDARD IS0 IS0 10935:1996(E) Optics and optical instruments - Microscopes - Interfacing connection type C II Scope This International Standard specifies the dimensions of a thread mount connection type
9、 C for a microscope imaging exit port (other than a monocular or binocular viewing tube) and the position of the primary image plane. 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this International Standard. At the t
10、ime of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and IS0 maintai
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 10935 1996
链接地址:https://www.31doc.com/p-3774017.html