ISO-10973-1995.pdf
《ISO-10973-1995.pdf》由会员分享,可在线阅读,更多相关《ISO-10973-1995.pdf(13页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD IS0 10973 First edition 1995-07-I 5 Cranes - Spare parts manual Appareils de levage i charge suspendue - Manuel de pikes de rechange - - 1 g/G I gQ+J- b) shall incorporate the use of internationally recog- nized symbols, if established; c) should be easy to use, compact and ma
2、de of durable hardwearing material; d) shall be compiled in the language normally used by the manufacturer, unless a specific language has been agreed on between the parties to the contract. The manual is a working tool which should be both convenient and complete. The text should be simple and adap
3、ted to the individuals who will use it, with all informatron being explicit and comprehensive. Illustrations, diagrams, graphs and tables should be used in preference to written text to avoid the risk of misunderstanding. They should be clear and simple, and be placed adjacent to any corresponding t
4、ext. The manual shall be presented in a manner that clearly and positively indicates that it is complete (for example each page shall be clearly numbered in se- quence and the total number of pages in the manual clearly shown, either on the first page only or on each individual page). The terms (see
5、 IS0 43061, definitions, units (see IS0 31) and symbols shall comply with the relevant International Standards. When the units specified dif- fer from those in common use, this should be noted in the manual in brackets or by means of a footnote. Only those items relative to the particular crane mode
6、l or series and its application shall be included. 2.2 Preliminary information The following information shall be given on the front or back cover, or on the first pages of the manual: a) b) cl d) e) f) title of the manual; reference number of the manual (if any); identification (designation, type,
7、series, model, etc.) of the crane with which the manual is in- tended to be used; serial number or numbers of crane or, where ap- propnate, range of serial numbers covered; name and full address of the crane manufacturer and/or his agent; table of contents and/or index. 2.3 Number of volumes The spa
8、re parts manual, with the other manuals par- ticular to the crane in question (for example driver s manual, user s manual, etc.), may be published in one or more volumes. The choice of the volume and grouping of the parts should be suitable for the type of product, its normal application and personn
9、el re- quirements. Where appropriate, cross-reference to 1 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/22/2007 21:59:41 MDTNo reproduction or networking permitted without license fro
10、m IHS -,-,- IS0 10973:1995(E) 0 IS0 other volumes should be made so that the same in- formation is not repeated unnecessarily. 3 Content The spare parts manual shall cover the complete crane. It is the common source of information for all maintenance and spare parts supply personnel. The manual shal
11、l include identification and location for all items supplied as replacement parts or assemblies. 3.1 General content The following information should normally be in- cluded: a) index of major assemblies, showing page num- bers and/or section; b) illustration of product, identifying major assem- blie
12、s and applicable page number and/or section. Each major assembly should be identified so that it clearly defines the area of the crane covered (see annex A for a typical example); c) details of all constituent units of the crane, in- cluding identification of replacement parts as- semblies and their
13、 part numbers; d) identification of all parts and part numbers on a diagram, photograph, etc. by a leader line or other suitable method (see annexes C and D); e) at the manufacturer s discretion, a numerical list or lists of all parts numbers, preferably grouped by major assemblies or pages. Where i
14、ndexed separately, a reference to the page number on which the part is shown should be tncluded (see annex B for a typical example); f) list of materials such as sealing compound, etc. for use in hydraulic and other fluid systems, stat- ing the part number where appropriate; g) when parts which comp
15、ly exactly with a national or International Standard are used, the appropriate standard reference, in addition to the manufac- turer s identification, should be shown; h) identification on all pages, for example, publication date. 3.2 Illustrations Each illustration shall be identified by a suitable
16、 num- ber and title. The presentation should preferably be a clear axonometric or other pictorial view, using ex- ploded views to improve clarity and understanding (see annex D for a typical example). Separate, enlarged views of intricate and complicated areas of the illustration should be provided
17、as “detail views”. Each part of an assembly shall be suitably designated with its part or index number to allow convenient reference to the parts list or index. If a part (for example a hydraulic cylinder) is further il- lustrated in detail on another page, that page shall be referenced on the origi
18、nal page (see annex C for a typical example). 3.3 Format of part list A typical column heading layout is shown in table 1. The quantity shown in column (3) should be the total number of component parts required for the assembly shown in the illustration. The entry in column (4) should be brief and,
19、where practicable, correspond to the recognized definition in an International Standard. Reference should be made to the master drawing, recorded in column (51, for full details of size, specification, etc. If a component, such as a cylinder, contains parts that are included in a repair kit, such pa
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 10973 1995
链接地址:https://www.31doc.com/p-3774053.html