ISO-11001-3-1993.pdf
《ISO-11001-3-1993.pdf》由会员分享,可在线阅读,更多相关《ISO-11001-3-1993.pdf(5页珍藏版)》请在三一文库上搜索。
1、IS0 LLOOL PT*3 93 4653903 054bb50 T5b = I NTE RNAT I O NA L IS0 STA N DAR D 11001-3 First edition 1993-1 0-01 Agricultural wheeled tractors and implements - Three-point hitch couplers - Part 3: Link coupler Tracteurs agricoles roues et instruments - Coupleurs rapides trois points - Partie 3: Coupleu
2、r rotules Reference number IS0 11001-3:1993(E) Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/28/2007 05:00:01 MDTNo reproduction or networking permitted without license from IHS -,-,-
3、IS0 LLOOL PT+3 93 = 4853903 054bb5L 992 IS0 11001-3:1993(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical commit
4、tees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the In
5、ternational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the membe
6、r bodies casting a vote. International Standard IS0 11001-3 was prepared by Technical Committee iSO/TC 23, Tractors and machinery for agriculture and forestry, Sub- committee SC 4, Tractors. IS0 11001 consists of the following parts, under the general title Agricul- tural wheeled tractors and implem
7、ents - Three-point hitch couplers: - Part I: U-frame coupler - Part 2: A-frame coupler - Part 3: Link coupler - Part 4: Bar coupler O IS0 1993 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
8、and microfilm, without per- mission in writing from the publisher. International Organization for Standardization Case Postale 56 CH-1211 Genve 20 Switzerland Printed in Switzerland II Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Techn
9、ical Standards 1/9972545001 Not for Resale, 04/28/2007 05:00:01 MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 LLOOL PT*3 93 485LS03 0546652 829 W INTERNATIONAL STANDARD IS0 11001-3:1993(E) Agricultural wheeled tractors and implements - Three-point hitch couplers - Par
10、t 3: Link coupler 1 Scope This part of IS0 11001 specifies the essential dimen- sions for the attachment of three-point hitch im- plements to agricultural wheeled tractors equipped with a three-point free link hitch according to IS0 730-1 or IS0 8759-2, and a set of link couplers. NOTE 1 In general
11、the dimensions associated with the tractor and the implement for use with hitch couplers are the same as those for the three-point linkage specified in IS0 730-1 or IS0 8759-2, and those for the clearance zone specified in IS0 2332. The three-point hitch coupler systems constitute a special method o
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 11001 1993
链接地址:https://www.31doc.com/p-3774088.html