《ISO-11125-5-1993.pdf》由会员分享,可在线阅读,更多相关《ISO-11125-5-1993.pdf(8页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD IS0 111255 First edition 1993-l 2-15 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure Prkparation des subjectil
2、es dacier avant application de peintures et de produits assimilks - Mdthodes dessai pour abrasifs m 7 Test report c) the result of each test; The test report shall contain at least the following in- formation: d) any deviation from the test method specified; e) the date of each test; a) all details
3、necessary to identify the product tested, in accordance with the appropriate part of f) the name of the person who carried out each test. IS0 11124 (see annex A), if applicable; Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical St
4、andards 1/9972545001 Not for Resale, 04/26/2007 02:41:44 MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 11125-5:1993(E) Annex A (informative) International Standards for metallic blast-cleaning abrasives Requirements and test methods for metallic blast- cleaning abrasi
5、ves are contained in IS0 11124 and IS0 11125, respectively. IS0 11124 will consist of the following parts, under the general title: Preparation of steel substrates before application of paints and related products - Specification for metallic blast-cleaning abrasives - Part 1: General introduction a
6、nd classification - Part 2: Chilled-iron grit - Part 3: High-carbon cast-steel shot and grit - Part 4: Low-carbon cast-steel shot - Part 5: Cut steel wire IS0 11125 will consist of the following parts, under the general title: Preparation of steel substrates before application of paints and related
7、products - Test methods for metallic blast-cleaning abrasives - Pat-t 1: Sampling - Part 2: Determination of particle size distri- bution - Part 3: Determination of hardness - Part 4: Determination of apparent density - Part 5: Determination of percentage defective particles and of microstructure -
8、Part 6: Determination of foreign matter - Part 7: Determination of moisture - Part 8: Determination of abrasive mechanical properties Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/26/2
9、007 02:41:44 MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 11125-5:1993(E) UDC 667.648.1:621.7.023:621.691.1:620.191.3/.4 Descriptors: paints, varnishes, substrates, steel products, blast-cleaning, abrasives, metallic abrasives, tests, determination, defects, microscopic analysis. Price based on 4 paPes Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/26/2007 02:41:44 MDTNo reproduction or networking permitted without license from IHS -,-,-
链接地址:https://www.31doc.com/p-3774112.html