BS-6893-PART-3-SECTION-406-TO-408-1995 IEC-60684-3-406-TO-408-1988.pdf
《BS-6893-PART-3-SECTION-406-TO-408-1995 IEC-60684-3-406-TO-408-1988.pdf》由会员分享,可在线阅读,更多相关《BS-6893-PART-3-SECTION-406-TO-408-1995 IEC-60684-3-406-TO-408-1988.pdf(12页珍藏版)》请在三一文库上搜索。
1、BRITISH STANDARD BS 6893-3: Sections 406 to 408:1995 IEC 684-3-406 to 408:1988 Flexible insulating sleeving for electrical purposes Part 3: Specification for requirements for individual types of sleeving Sections 406 to 408: Glass textile sleeving with PVC based coating (Implementation of CENELEC HD
2、 523.3.406 to 408 S1:1990) UDC 621.315.612.6-494:621.315.616 Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 07:12:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6893-3:Sections 406 to 408:1995 This British Standard, having been prepared under the direction of the Electrotechnical Sector Bo
3、ard, was published under the authority of the Standards Board and comes into effect on 15 September 1995 BSI 11-1999 The following BSI references relate to the work on this standard: Committee reference GEL/15/3/5 Draft announced in BSI News April 1995 ISBN 0 580 24429 6 Committees responsible for t
4、his British Standard The preparation of this British Standard was entrusted by Technical Committee GEL/15, Insulating material, to Subcommittee GEL/15/3/5, Sleevings, upon which the following bodies were represented: Adhesive Tape Manufacturers Association British Rubber Manufacturers Association Lt
5、d. Ministry of Defence Amendments issued since publication Amd. No.DateComments Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 07:12:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6893-3:Sections 406 to 408:1995 BSI 11-1999i Contents Page Committees responsibleInside front cover National f
6、orewordii Foreword2 Introduction3 1Scope3 2Designation3 3Requirements3 4Thermal Classification3 Table I Dimensional requirements4 Table II Requirements5 Table III Special requirements5 Table IV Mandrel diameters for bending tests6 Table V Requirements for breakdown voltage6 List of referencesInside
7、back cover Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 07:12:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6893-3:Sections 406 to 408:1995 ii BSI 11-1999 National foreword These Sections of BS 6893 have been prepared by Subcommittee GEL/15/3/5. They are identical with IEC 684-3-406 to
8、408:1988 Specification for flexible insulating sleeving Part 3: Specification requirements for individual types of sleeving Sheets 406 to 408: Glass textile sleeving with PVC based coating, published by the International Electrotechnical Commission (IEC) and endorsed by the European Committee for El
9、ectrotechnical Standardization (CENELEC) as HD 523.3.406 to 408 S1. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immuni
10、ty from legal obligations. Cross-references Publication referred toCorresponding British Standard BS 6893 Flexible insulating sleeving for electrical purposes IEC 684-1:1980Part 1:1987 Specification for general requirements (Identical) IEC 684-2:1984Part 2:1987 Methods of test (Identical) IEC 757:19
11、83BS 7645:1993 Code for designation of colours (Identical) Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the HD title page, pages 2 to 6, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amend
12、ments incorporated. This will be indicated in the amendment table on the inside front cover. Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 07:12:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI HARMONIZATION DOCUMENT DOCUMENT DHARMONISATION HARMONISIERUNGSDOKUMENT HD 523.3.406 to 408 S1 Januar
13、y 1990 UDC 621.315.612.6-494:621.315.616 Descriptors: Electronic component, protection sleeving, flexible material, glass textile and PVC based coating English version Specification for flexible insulating sleeving Part 3: Specification requirements for individual types of sleeving Sheets 406 to 408
14、: Glass textile sleeving with PVC based coating (IEC 684-3-406 to 408:1988) Spcification pour gaines isolantes souples Troisime partie: Spcifications particulires aux types particuliers de gaines Feuilles 406 408: Gaines en fibre de verre tisses, avec revtement PVC (CEI 684-3-406 408:1988) Bestimmun
15、g fr flexible Isolierschluche Teil 3: Technische Lieferbedingungen fr einzelne Schlauchtypen Bltter 406 bis 408: Glasfilament-Textilschluche mit Beschichtung auf PVC-Basis (IEC 684-3-406 bis 408:1988) This Harmonization Document was approved by CENELEC on 1989-12-05. CENELEC members are bound to com
16、ply with the CEN/CENELEC Internal Regulations which stipulate the conditions for implementation of this Harmonization Document on a national level. Up-to-date lists and bibliographical references concerning national implementation may be obtained on application to the Central Secretariat or to any C
17、ENELEC member. This Harmonization Document exists in three official versions (English, French, German). CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spa
18、in, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1990 Copyright reserved to CENELEC mem
19、bers Ref. No. HD 523.3.406 to 408 S1:1990 E Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 07:12:57 GMT+00:00 2006, Uncontrolled Copy, (c) BSI BS 6893-3:Sections 406 to 408:1995 BSI 11-1999 2 Foreword This Harmonization Document was approved by CENELEC on 1989-12-05. The following dates were
20、 fixed: latest date of announcement of the HD at national level(doa) 1990-03-01 latest date of publication of a harmonized national standard(dop) 1990-09-01 latest date of withdrawal of conflicting national standards(dow) 1990-09-01 Licensed Copy: sheffieldun sheffieldun, na, Tue Dec 05 07:12:57 GMT
21、+00:00 2006, Uncontrolled Copy, (c) BSI BS 6893-3:Sections 406 to 408:1995 BSI 11-19993 Introduction This standard is one of a series which deals with flexible insulating sleeving for electrical purposes. This series consists of three parts: Part 1: Definitions and General Requirements (IEC Publicat
22、ion 684-1); Part 2: Methods of Test (IEC Publication 684-2); Part 3: Specification Requirements for Individual Types of Sleeving (IEC Publication 684-3). This standard gives three of the sheets comprising Part 3, as follows: Sheet 406: Glass textile sleeving with PVC based coating: high breakdown st
23、rength; Sheet 407: Glass textile sleeving with PVC based coating: medium breakdown strength; Sheet 408: Glass textile sleeving with PVC based coating: lower breakdown strength; 1 Scope This sheet gives requirements for E type glass sleeving using either braided or knitted construction with a continu
24、ous flexible coating based on polyvinyl chloride (PVC) or its co-polymers or blends thereof. The sleeving is normally available in bore sizes 0.3 mm to 25 mm and in the following colours: black, white, red, yellow, blue, brown, green, grey, orange, pink and green/yellow. 2 Designation The sleeving s
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS-6893-PART-3-SECTION-406-TO-408-1995 IEC-60684-3-406-TO-408-1988 BS 6893 PART SECTION 406 TO 408 1995
链接地址:https://www.31doc.com/p-3774163.html