ISO-13441-1-1997.pdf
《ISO-13441-1-1997.pdf》由会员分享,可在线阅读,更多相关《ISO-13441-1-1997.pdf(18页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD AJW krternat DOC 236362 IS0 13441-l First edition 1997-08-l 5 Air-assisted agricultural sprayers - Data sheets - Part 1: Typical layout Pulwkisateurs agricoles 2 jet port4 - Fiches techniques - Pat-tie 1: Plan type de pksentation Reference number IS0 13441-1:1997(E) Copyright
2、International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/20/2007 06:36:14 MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 13441-1:1997(E) Foreword IS0 (the International Organ
3、ization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been establish
4、ed has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
5、 Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 13441-l was prepared by Technical Committee l
6、SO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 6, Equipment for crop protection. IS0 13441 consists of the following parts, under the general title Air-assisted agricultural sprayers - Data sheets: - Part 1 : Typical layout - Part 2 : Technical specifications related
7、to components Annex A forms an integral part of this part of IS0 13441. Annex B is for information only. 0 IS0 1997 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
8、 and microfilm, without permission in writing from the publisher. International Organization for Standardization Case postale 56 l CH-1211 Geneve 20 l Switzerland Internet central iso.ch x.400 c=ch; a=400net; p=iso; o=isocs; s=central Printed in Switzerland ii Copyright International Organization fo
9、r Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/20/2007 06:36:14 MDTNo reproduction or networking permitted without license from IHS -,-,- INTERNATIONAL STANDARD 0 IS0 IS0 13441-l :1997(E) Air-assisted agricultural sprayers -
10、 Data sheets - Part 1: Typical layout 1 Scope This part of IS0 13441 establishes the technical specifications of data sheet presentation, for the preparation of documents giving information about dimensions, materials, characteristics and design of air-assisted agricultural sprayers used for the app
11、lication of crop protection products in arboriculture, viticulture and hop cultivation. Data sheets prepared according to this part of IS0 13441 will facilitate discussion between the manufacturers of sprayers and the manufacturers of component parts and accessories. This part of IS0 13441 is applic
12、able during the preparation of data sheets by manufacturers or importers of air- assisted agricultural sprayers, whether mounted, trailed or self-propelled. The list of codes used in this part of IS0 13441 is given in annex A. A list of International Standards related to this part of IS0 13441 is gi
13、ven in annex B. 2 Normative reference The following standard contains provisions which, through reference in this text, constitute provisions of this part of IS0 13441. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based
14、 on this part of IS0 13441 are encouraged to investigate the possibility of applying the most recent edition of the standard indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. IS0 789-311982, Agricultural tractors - Test procedures - Part 3: Turnin
15、g and clearance diameters. 1 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/20/2007 06:36:14 MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 13441-1:1997(E
16、) 3 General specifications 3.1 Manufacturer Name and address of manufacturer/distributor/importer: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 Type and year of manufacture Type: 7 Trailed (p.t.0. driven) Traile
18、d (driven by engine) General design of spraying and auxiliary devices (code 502): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Capacity: . . . . . . . . . . . . . . . .
19、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I Year of manufacture: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Model:. . Direct indication of the year of manufacture (explanation of code): Location of marking (code 101):. . . . . . . .
21、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Trade-name(s) . . . . . . . . . . . . . . . . . . . . . . . . . . .
22、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Te
23、chnical Standards 1/9972545001 Not for Resale, 04/20/2007 06:36:14 MDTNo reproduction or networking permitted without license from IHS -,-,- fJ IS0 IS0 13441-l :1997(E) 4 Dimensions See figures 1 to 3. Mounted Trailed equipment equipment Total length, L1: . . . . . . . . . . . . . . . . . . . . . .
24、. . . . . . . . . . . . . . . Self-propelled equipment m Axle-coupling length, L2: Wheelbase, Ls: . Wheel track, W1 non-variable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . minimum: . . . . .
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 13441 1997
链接地址:https://www.31doc.com/p-3774575.html