ISO-10653-1993.pdf
《ISO-10653-1993.pdf》由会员分享,可在线阅读,更多相关《ISO-10653-1993.pdf(7页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD IS0 10653 First edition 1993-04-l 5 Light-gauge metal containers - Round open-top cans - Cans defined by their nominal gross lidded capacities Emballages mhalliques I b) the can diameter is listed in IS0 1361 and the can size was previously listed in IS0 3004; c) the inclusion
2、 of the can size has been supported by at least three member bodies of TC 52. NOTE 1 The can sizes appearing in this International Standard are classified by their construction type in ISO/TR 11761. Round can sizes which were previously included in Parts 1 to 6 of IS0 3004 but not given in this Inte
3、rnational Standard are listed for infor- mation in lSO/TR 11761:1992, annex A. . . . III Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/27/2007 03:49:49 MDTNo reproduction or networking
4、 permitted without license from IHS -,-,- INTERNATIONAL STANDARD IS0 10653:1993(E) Light-gauge metal containers - Round open-top cans - Cans defined by their nominal gross lidded capacities 1 scope This International Standard specifies the nominal gross lidded capacities applicable to round open-top
5、 cans having nominal diameters listed in IS0 1361, excluding cans for liquid products with added gas). 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publi- cation, the edit
6、ions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most re- cent editions of the standards indicated below. Members of IEC and IS0 maintain registers of cur- re
7、ntly valid International Standards. IS0 90-l : 1986, Light gauge metal containers - Defi- nitions and determination methods for dimensions and capacities - Part I: Open-top cans. IS0 1361:1983, Light gauge metal containers - Open-top cans - Round cans - Internal diameters. 3 Dimensions Nominal gross
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 10653 1993
链接地址:https://www.31doc.com/p-3774728.html