ISO-2017-2-2007.pdf
《ISO-2017-2-2007.pdf》由会员分享,可在线阅读,更多相关《ISO-2017-2-2007.pdf(18页珍藏版)》请在三一文库上搜索。
1、 Reference number ISO 2017-2:2007(E) ISO 2007 INTERNATIONAL STANDARD ISO 2017-2 First edition 2007-12-15 Mechanical vibration and shock Resilient mounting systems Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems Vibrations et ch
2、ocs mcaniques Systmes de montage rsilients Partie 2: Informations techniques changer pour lapplication disolation vibratoire associe aux chemins de fer Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=IHS Employees/1111111001, User=Japan, IHS N
3、ot for Resale, 12/17/2007 20:07:09 MSTNo reproduction or networking permitted without license from IHS -,-,- ISO 2017-2:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless t
4、he typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of
5、Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
6、 unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, elec
7、tronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.
8、org Web www.iso.org Published in Switzerland ii ISO 2007 All rights reserved Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=IHS Employees/1111111001, User=Japan, IHS Not for Resale, 12/17/2007 20:07:09 MSTNo reproduction or networking permitt
9、ed without license from IHS -,-,- ISO 2017-2:2007(E) ISO 2007 All rights reserved iii Contents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references. 1 3 Terms and definitions. 2 4 Vibration of railway systems . 2 5 Purpose of vibration isolation (why isolate mechanical systems) 3 6 Wha
10、t is to be isolated. 4 6.1 Source isolation 4 6.2 Receiver isolation. 4 7 Applicability of vibration isolation (when to isolate structures or mechanical systems). 4 8 Measurement and evaluation of vibration conditions 5 9 Information for the choice of an isolation mounting system. 5 10 Information t
11、o be supplied by the railway system authority 6 11 Information to be supplied by the receiver producer and user . 7 11.1 Buildings 7 11.2 Sensitive equipment. 7 12 Information to be provided by the supplier of the isolation system. 8 12.1 Performance of isolation system 8 12.2 Physical data of the i
12、solation system. 8 12.3 Dynamic behaviour. 9 12.4 Durability . 9 12.5 Environmental data. 9 12.6 Maintenance data 9 13 Guidelines for the validation of isolation performance 10 Bibliography. 11 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=I
13、HS Employees/1111111001, User=Japan, IHS Not for Resale, 12/17/2007 20:07:09 MSTNo reproduction or networking permitted without license from IHS -,-,- ISO 2017-2:2007(E) iv ISO 2007 All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of nat
14、ional standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Interna
15、tional organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the r
16、ules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by a
17、t least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 2017-2 was prepared by Technical Committee ISO/
18、TC 108, Mechanical vibration, shock and condition monitoring. The first edition, together with ISO 2017-1:2005 cancels and replaces ISO 2017:1982 which has been technically revised. ISO 2017 consists of the following parts, under the general title Mechanical vibration and shock Resilient mounting sy
19、stems: Part 1: Technical information to be exchanged for the application of isolation systems Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems Copyright International Organization for Standardization Provided by IHS under licens
20、e with ISO Licensee=IHS Employees/1111111001, User=Japan, IHS Not for Resale, 12/17/2007 20:07:09 MSTNo reproduction or networking permitted without license from IHS -,-,- ISO 2017-2:2007(E) ISO 2007 All rights reserved v Introduction This part of ISO 2017 is limited to consideration of resilient de
21、vices. Some suppliers of shock and vibration isolators (resilient mounts) have experience covering a wide variety of applications. In most instances, they are willing to use their background information for solving the users isolation problems. However, it is frequently difficult for the supplier to
22、 provide this service, because the customer, the user or the producer of vibration source or receiver has not furnished sufficient information regarding the application. On the other hand, the user is sometimes handicapped in applying isolators properly because sufficient technical information is no
23、t furnished by the supplier. Consequently, the user will often conduct his own experimental evaluation of the isolator and may unknowingly duplicate work already carried out by the supplier. In some cases of vibration source or receiver, the producer provides the isolating system. To do that he need
24、s detailed information from the customer relating to his future application, site and environment. This part of ISO 2017 is intended to serve as guide for the exchange of technical information regarding the application of isolation elements for vibrations and shocks generated by railway systems, bet
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 2017 2007
链接地址:https://www.31doc.com/p-3776128.html