ISO-11084-1-1993.pdf
《ISO-11084-1-1993.pdf》由会员分享,可在线阅读,更多相关《ISO-11084-1-1993.pdf(8页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD ISO 11084-1 First edition 1993-04-15 Graphit technology - Register Systems for photographic materials, foils and Paper - Part 1: Three-pin Systems Technologie graphique - Systemes de positionnement pour matbriaux photographiques, feuilles et papier - Partie 1: SystGmes 2 trois
2、 broches Reference number ISO 11084-1 :1993(E) ISO 11084=1:1993(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical
3、 committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with
4、 the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of th
5、e member bodies casting a vote. International Standard ISO 11084-1 was prepared by Technical Committee lSO/TC 130, Graphit technology. ISO 11084 consists of the following Parts, under the general title Graphit technology - Register systems for photographic materials, foils and pa- per. - Part 1: Thr
6、ee-pin Systems 0 ISO 1993 All rights reserved. No patt of this publication may be reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without per- mission in writing from the publisher. International Organkation for Standardization Case
7、 Postale 56 l CH-l 211 Geneve 20 l Switzerland Printed in Switzerland ii ISO 110841:1993(E) - Introduction lt is intended to develop International Standards to reduce the variety of register Systems in graphic technology to achieve greater economy in the use of consumable materials and processing eq
8、uipment. ISO 11084 relates to photographic materials, foils and Paper, and other non-metallic materials. Metallic printing plates, forms etc. have different mechanical properties, and will be the subject of a future International Standard. This part of ISO 11084 covers the three-pin System, giving c
9、entral align- ment of the punched material. Future Parts are planned to cover two-pin Systems, giving edge alignment, and two- and three-pin Systems, which allow a smaller margin and thereby reduce material wastage. . . . Ill -,-,- This page intentionally left blank INTERNATIONAL STANDARD ISO 11084=
10、1:1993(E) Graphit technology - Register Systems for photographic materials, foils and Paper - Part 1: Three-pin Systems 1 Scope This part of ISO 11084 specifies the positions and di- mensions for the pins and holes of three-pin register Systems to achieve accurate positioning of Originals, Separatio
11、ns and printing plates on press and prepress equipment. This patt of ISO 11084 is applicable to - punched materials, e.g. photographic materials, foils and Papers; - machines and devices for punching the above materials; - machines and devices using register Systems. lt is not applicable to punched
12、metallic materials. 2 Normative references The following Standards contain provisions which, through reference in this text, constitute provisions of this part of ISO 11084. At the time of publication, the editions indicated were valid. All Standards are subject to revision, and Parties to agreement
13、s based on this part of ISO 11084 are encouraged to investi- gate the possibility of applying the most recent edi- tions of the Standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. 3 Definitions For the purposes of this part of ISO 11084, t
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 11084 1993
链接地址:https://www.31doc.com/p-3776312.html