ISO-1992-8-1978.pdf
《ISO-1992-8-1978.pdf》由会员分享,可在线阅读,更多相关《ISO-1992-8-1978.pdf(4页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD 1992/Vlll INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlEX,QYHAPOHAR OPTAHM3AL of tools. However, the panels within the storage volume, for example those which cover the air ducts and the fan(s), are to be left in position even if they are able to be removed without the use
2、of tools. 3.3 The test fingers shall be applied with the least force necessary, in every possible position except that a cabinet normally used on the floor and having a mass exceeding 40 kg shall not be tilted. 3.4 Apertures preventing the entry of the jointed finger shall be further tested by means
3、 of the unjointed finger, which shall be applied with a force of 30 N; if this finger enters, the test with the jointed finger shall be repeated, the jointed finger being pushed through the aperture if necessary. b) a straight unjointed test finger of the same dimensions. 4 TEST REPORT 3 TEST PROCED
4、URE 3.1 The test shall be made with the cabinet disconnected from the electrical supply and with moving parts (for example, fan blades) rotated or moved so that they are as close as possible to the test finger. 3.2 The test shall be made on the cabinet after the removal of all parts which can be rem
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 1992 1978
链接地址:https://www.31doc.com/p-3776314.html