ISO-17020-1998.pdf
《ISO-17020-1998.pdf》由会员分享,可在线阅读,更多相关《ISO-17020-1998.pdf(18页珍藏版)》请在三一文库上搜索。
1、BB CC Reference number ISO/IEC 17020:1998(E) INTERNATIONAL STANDARD ISO/IEC 17020 First edition 1998-11-15 General criteria for the operation of various types of bodies performing inspection Critres gnraux pour le fonctionnement de diffrents types dorganismes procdant linspection ISO/IEC 17020:1998(
2、E) ISO/IEC 1998 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. ISO/IEC Copyright Office Case post
3、ale 56 CH-1211 Genve 20 Switzerland Printed in Switzerland ii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical comm
4、ittees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
5、International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the mem
6、ber bodies casting a vote. International Standard ISO 17020 was prepared by the European Committee for Standardization (CEN) and the European Committee for Electrotechnical Standardization (CENELEC) as EN 45004, and was adopted, under a special “fast-track procedure”, by the ISO Committee on Conform
7、ity Assessment (ISO/CASCO) in parallel with its approval by the ISO member bodies and the IEC National Committees. The ISO Committee on Conformity Assessment (ISO/CASCO), now mandated to produce International Standards, chose EN 45004 to meet a perceived market need for an international consensus-ba
8、sed normative document on requirements for inspection bodies, replacing ISO/IEC Guide 39:1988, General requirements for the acceptance of inspection bodies, and ISO/IEC Guide 57:1991, Guidelines for the presentation of inspection results. Throughout the text of this standard, read . this European St
9、andard . to mean . this International Standard . Annexes A to C form an integral part of this International Standard. Annexes D and ZZ are for information only. Annex ZZ provides a list of corresponding International and European Standards for which equivalents are not given in the text. -,-,- ISO/I
10、ECISO/IEC 17020:1998(E) iii Foreword This European Standard has been drawn up by CEN/CENELEC/TC 1 “Criteria for conformity assessment bodies”, whose secretariat is held by the CEN Central Secretariat. This European Standard shall be given the status of a national standard, either by publication of a
11、n identical text or by endorsement, at the latest by September 1995, and conflicting national standards shall be withdrawn at the latest by September 1995. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denm
12、ark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom. ISO/IEC 17020:1998(E) ISO/IEC iv Introduction This European Standard has been drawn up with the objective of promoting confidence in those bodies per
13、forming inspection which conform to it. It has been drawn up in the light of experience of European bodies performing inspections taking into account requirements and recommendations of European and international documents such as the ISO 9000 (EN/ISO 9000) series of standards and ISO/IEC Guide 39.
14、Inspection bodies have carried out assessments on behalf of private clients, their parent organizations, and/or official authorities with the objective of providing information to those parties relative to conformity with regulations, standards, or specifications. Inspection parameters may include m
15、atters of quantity, quality, safety, fitness for use, and continued safety compliance of plant or systems in operation. The general criteria, with which these bodies are required to comply in order that their services be accepted by clients and by supervisory authorities, need to be harmonized in a
16、European standard. This standard, therefore, covers the functions of bodies whose work may include the examination of materials, products, installations, plant, processes, work procedures, or services, and the determination of their conformity, with requirements, and the subsequent reporting of resu
17、lts of these activities to clients and, when required, to supervisory authorities. Inspection of a product an installation or plant may concern all stages during the lifetime of these items, including the design stage. Such work normally requires the exercise of professional judgement in providing t
18、he service, in particular when assessing conformity. The requirement for the independence of inspection bodies varies according to legislation and market needs. This standard therefore includes, in annexes A, B and C, criteria for independence. This standard has also been produced to support the int
19、roduction of the conformity assessment procedures specified in the EC Council decision concerning the modules for the various phases of the conformity assessment procedures which are intended to be used in the technical harmonization directives. The relevant requirements of the EN/ISO 9000 series of
20、 standards applying to the quality systems for inspection bodies are incorporated in this standard. This standard forms part of the following series of standards covering testing, inspection, certification and accreditation: EN 45001, General criteria for the operation of testing laboratories EN 450
21、02, General criteria for the assessment of testing laboratories EN 45003, General criteria for the laboratory accreditation bodies EN 45004, General criteria for the operation of bodies performing inspection EN xxxx1), General criteria for the accreditation of various types of bodies performing insp
22、ection EN 45011, General criteria for certification bodies operating product certification EN 45012, General criteria for certification bodies operating quality system certification EN 45013, General criteria for certification bodies operating certification of personnel EN 45014, General criteria fo
23、r suppliers declaration of conformity EN 45020, General terms and their definitions concerning standardisation and related activities 1) In preparation. -,-,- INTERNATIONAL STANDARD ISO/IECISO/IEC 17020:1998(E) 1 General criteria for the operation of various types of bodies performing inspection 1 S
24、cope 1.1 This European standard specifies general criteria for the competence of impartial bodies performing inspection irrespective of the sector involved. It also specifies independence criteria. 1.2 This standard is intended for the use of inspection bodies and their accreditation bodies as well
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 17020 1998
链接地址:https://www.31doc.com/p-3776393.html