ISO-5321-1978.pdf
《ISO-5321-1978.pdf》由会员分享,可在线阅读,更多相关《ISO-5321-1978.pdf(8页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD - INTERNATIONAL ORGANIZATION FOR STANDARDIZATION #MEXAYHAPOAHAII OPI-AHW3AUW(I no CTAHAAPTW3AI.ViW.ORGANISATION INTERNATIONALE DE NORMALISATION Coniferous wood raw parquet blocks - General characteristics Frises brutes en bois r the number of raw parquet blocks in a Sample sha
2、ll be at least that specified in table 2. TABLE 2 of irejected pieces from 8 001 to 22 000 from 22 001 to 110 000 from 110 001 to 550 000 6.4 When the number of rejected raw parquet blocks does not exceed the number specified in table 2, the batch is accepted. Otherwise, the batch shall be regrouped
3、 and presented for a new inspection. 7 DNSPECTIQN METHODS 7.1 All the raw parquet be inspected indiv idually. blocks making up a Sample shall 7.2 The dimensions and the squareness of ends to the lateral arrises of faces shall be checked with measuring instruments capable of recording to the prescrib
4、ed degree of accuracy, the measurements being carried out at least at two Points. No dimension shall lie outside the tolerantes clause 5. specif ied in 7.3 The flatness shall be checked by the application of one of the raw parquet block faces on a perfectly flat surface and by measuring the deviatio
5、ns with appropriate measuring instruments. 7.4 The dimensions appropriate measuring sf defects shail be measured with instruments. 7.5 Non-measurab visually examined. Ie defects and the appearance shall be 7.6 The moisture content should be determined by an electrometric method. NQTE - In the case o
6、f disagreement, the moisture content shall be determined by the gravimetric method specified in 60 3130. 8 DESIGNATION Raw parquet blocks shall be designated by stating successively : - the Symbol of wood species according to ISO 2036; - the dimensions (thickness x width x length) expressed in milli
7、metres; - the grade; - the number of the International Standard referring to the respective Speeies of wood. ExampJe of designation of fir raw parquet blocks, 24 mm thick, 50 mm wide and 400 mm Iong, first grade : ABIA - 24 x 50 40 9 DELIVERY 9.1 Packaging 9.1.1 When the raw parquet blocke; are deli
8、vered in bundles, they shall, unless otherwise agreed upon between the interested Parties, be sf the same wood Speeies, dimensions (thickness, width, length), and grade, and be bound in bundles of 10 or more, by multiples of IO. 9.1.2 The bundles shall be tightly bound at their ends with strong and
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 5321 1978
链接地址:https://www.31doc.com/p-3778596.html