ISO-3305-1985.pdf
《ISO-3305-1985.pdf》由会员分享,可在线阅读,更多相关《ISO-3305-1985.pdf(9页珍藏版)》请在三一文库上搜索。
1、International Standard 3305 0 a 4 4g!ib INTERNATIONAL ORGANIZATION FOR STANOARDIZATION*MEYHAPOAHAR OPrAHM3AlMR fl0 CTAHAPTl43Al reference to this International Standard; grade of steel; required condition of tubes at delivery; outside diameter and thickness; length. 4.2 Optional conditions Certain a
2、lternatives are permitted; other supplementary re- quirements may be specified and the purchaser shall state his requirements in his enquiry and order; if he does not do so, supply will be made at the option of the manufacturer. 4.3 Designation The tubes shall be designated in the following sequence
3、 by - the name of the product; - reference to this International Standard; - the grade of steel, the condition of tubes at delivery; - the outside diameter and the thickness. 1) At present at the stage of draft. (Revision of ISOIR 202-1961 which remains in force until publication of IS0 6492.) 2) At
4、 present at the stage of draft. (Revision of ISO/R 166-1960 which remains in force until eublication of IS0 6493.) Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007 02:10:48 MDTNo
5、reproduction or networking permitted without license from IHS -,-,- IS0 3305-1985 (E) Welded precision steel tubes, in accordance with IS0 3305, in steel R37, annealed in a controlled atmosphere (GBK), of out- side diameter 25 mm, thickness 2 mm, in random lengths, shall be designated as Steel tubes
6、 IS0 3306-R37-GBK-26 x 2 5 Manufacturing processes 5.1 Steel-making processes and deoxidation The tubes shall be manufactured from a steel produced by an open or electric hearth, or one of the basic oxygen steel-making processes. The method of manufacture and deoxidation process is left to the optio
7、n of the manufacturer. At the purchasers request, the supplier shall indicate the steel- making process and the deoxidation procedure used. Rimmed steel is permitted for steel grades R28, R33 and R37 5.2 Tube-making process The tubes shall be manufactured from either hot- or cold-rolled steel strip
8、longitudinally welded continuously by the passage of an electric current across the abutting edges without the ad- dition of filler metal. They are normally cold-finished on both the inside and the outside surfaces. For certain applications, the tubes may be heat-treated. The condition of the tubes
9、at delivery shall be chosen from table 1. 5.3 Heat treatment; delivery condition The tubes are normally delivered in one of the conditions shown in table 1. 6 Chemical composition, mechanical properties and weldability 6.1 Chemical composition 6.1 .l Ladle analysis On ladle analysis, the steel shall
10、 show the composition given in table 2, appropriate to the steel type specified. Table 1 - Delivery condition Cold-finished/hard (cold-finished as-drawn) process. For this reason the tubes have only the upper transformation point and cooled. Both stages of heat treatment are carried out Table 2 - Ch
11、emical composition on ladle analysis C Si Mn P S Grade” max. max. max. max. max. % % % % % R28 0,132 - 0,60 0,050 0,050 I333 0,162 - 0,70 0,050 0,050 R37 0,172 0.35 03 0,050 0,050 R44 0,21 0.35 1.2 0,050 0,050 R!% 0.23 0.55 jr3 0,050 0,050 1) The designations used are provisional. 2) Rimmed steel ma
12、y be used for steel grades R28, R33 and R37. If used for R33 and R37, the carbon content may be increased to 0,19 % max. Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/25/2007 02:10:48
13、MDTNo reproduction or networking permitted without license from IHS -,-,- IS0 3305-1965 (E) 6.1.2 Product analysis If a check analysis is required on tubes made from killed steel, the permissible deviations given in IS0 26W3 apply. 6.2 Mechanical properties 6.2.1 The mechanical properties depend on
14、the delivery con- dition. They are specified in tables 3, 4, 5 and 6. For tubes delivered in the annealed condition, the yield stress may be taken as 50 % of the minimum tensile strength given in table 5 for the purpose of calculating the test pressure. Table 3 - Mechanical properties in the cold-fi
15、nished, as-drawn condition - BK Grade R28 R33 R37 R44 R50 R, min. A min. on 5,65 o0 N/mm* % 400 8 420 6 450 6 520 5 600 4 Table 4 - Mechanical properties in the lightly cold-worked condition - BKW Grade R, min. A min. on 5,65 o0 N/mm* % R28 350 10 R33 370 10 R37 400 9 R44 450 8 R!N 550 7 Table 5 - M
16、echanical properties in the annealed condition - GBK and GZF I R, min. A min. on 5,65 f10 Grade N/mm* % Table 6 - Mechanical properties in the normalized condition - NBK and NZF Grade b) exact length. 7.2 Tolerances 7.2.1 Diameter The permissible variations on outside and inside diameter apply to co
17、ld-finished/hard and cold-finished/soft tubes, and are given in table 9. As a result of distortion during annealing, with annealed and normalized tubes, the variations in diameter are greater; the permissible values are as follows : Thickness, T (mm) Outside diameter, D (mm) Tolerance TID 1120 the v
18、alues given in table 9 TID II40 I,5 times the values given in table 9 TID II60 twice the values given in table 9 TID 5OOmmbut 62OOOmm 2COOmmbut 65OOOmm +imm +imm +Emm 5OOOmmbut 67000mm +lirnrn 7OOOmm by agreement If, in individual cases, lengths are required with a greater degree of accuracy, the pe
19、rmissible variations shall be agreed upon when ordering. 7.2.5 Straightness The tubes shall be straight. For diameters greater than or equal to 16 mm, the total bend shall not exceed 0,2 % of the overall length of the tube. The bend measured on any length of 1 m shall not exceed I,5 mm. Special tole
20、rances may be agreed between the manufacturer and the purchaser. 7.2.6 End preparation b) tensile test; The tube ends shall be cut nominally square to the axis of the tube. By agreement between the interested parties, special end-finishing may be applied. c) drift expanding test; or d) flattening te
21、st. 8 Appearance and soundness 8.1 Appearance The tubes shall have smooth external and internal surfaces, the degree of smoothness depending on the method of manu- facture. The tubes shall have a workmanlike finish but small im- perfections are permissible provided that the thickness remains within
22、the lower tolerance limit. The interval fin on these tubes resulting from welding may still be visible, but the thickness at the weld shall be within the stipulated tolerances. In the case of tubes with an inside diameter less than 16 mm, for manufacturing reasons the requirement regarding a smooth
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 3305 1985
链接地址:https://www.31doc.com/p-3779299.html