《ISO-8489-4-1995.pdf》由会员分享,可在线阅读,更多相关《ISO-8489-4-1995.pdf(8页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD ISO 8489-4 First edition 1995-12-15 Textile machinery and accessories - Cones for Cross winding - Part 4: Dimensions, tolerantes and designation of cones with half angle 4” 20 for winding for dyeing purposes Mat c) nature of yarn to be wound; d) thickness of cone wall (corresp
2、onding to the nature of the yarn to be wound); e) number, size and location of perforations. 2 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/26/2007 01:03:31 MDTNo reproduction or netw
3、orking permitted without license from IHS -,-,- 0 ISO ISO 8489=4:1995(E) The minimum distance between the ends of the cone and edges of the nearest holes shall be 16 mm + 0,5 mm. - 5 Dimensions, tolerantes and use of the gauges See figure2 and table2. Dimensions in millimetres Figure 2 - Gauge Table
4、 2 - Dimensions Dimensions in millimetres 4 * 55 4 *) 59 d4 * 33 4 190 b b) reference to this part of ISO 8489, i.e. ISO 8489-4; c) its large inner diameter, d, in millimetres; d) its length, 2, in millimetres. EXAMPLE A cone with a half angle of 4” 20 for dyeing purposes with a large inner diameter
5、 d of 59 mm and length 2 of 170 mm shall be designated as follows: Cone ISO 8489-4 - 59 x 170 4 Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/26/2007 01:03:31 MDTNo reproduction or net
6、working permitted without license from IHS -,-,- This page intentionally left blank Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/26/2007 01:03:31 MDTNo reproduction or networking perm
7、itted without license from IHS -,-,- ISO 8489-4: 1995(E) 63 ISO ICS 59.120.20 Descriptors: textile machinery, winding, winders, cones, dimensions. Price based on 4 pages Copyright International Organization for Standardization Provided by IHS under license with ISO Licensee=NASA Technical Standards 1/9972545001 Not for Resale, 04/26/2007 01:03:31 MDTNo reproduction or networking permitted without license from IHS -,-,-
链接地址:https://www.31doc.com/p-3779558.html