JIS-A-5430-2004-ENG.pdf
《JIS-A-5430-2004-ENG.pdf》由会员分享,可在线阅读,更多相关《JIS-A-5430-2004-ENG.pdf(44页珍藏版)》请在三一文库上搜索。
1、J IS JAPANESE INDUSTRIAL STANDARD Translated and Published by Japanese Standards Association Fiber reinforced cement boards ICs 91.100.40 Reference number : JIS A 5430 : 2004 (E) PROTECTED BY COPYRIGHT 23 s Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS E
2、mployees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 22:07:44 MDTNo reproduction or networking permitted without license from IHS -,-,- A 5430 : 2004 Foreword This translation has been made based on the original Japanese Industrial Standard revised by the Minister of Economy, Trade and
3、Industry through deliberations at the Japanese Industrial Standards Committee, as the result of proposal for revision of Japanese Industrial Standard submitted by Fiber Reinforced Cement Boards Association (SKC)/Japanese Standards Association (JSA) with the draft being attached, based on the provisi
4、on of Article 12 Clause 1 of the Industrial Standard- ization Law applicable to the case of revision by the provision of Article 14. Consequently JIS A 5430 : 2001 is replaced with this Standard. In the revision of this Standard, it is decided not to use the fibre reinforced cements boards containin
5、g asbestos, corresponding to the prohibition of using the fibre reinforced cements boards containing asbestos, by the enforcement of “the govern- ment ordinance to amend a part of enforcement order of Industrial Safety and Health Law” on October 1, 2004. This Standard has been made based on IS0 9933
6、 : 1995 Products in fibre-reinforced cement-Long corrugated or asymmetrical section sheets and fittings for roofing and cladding and IS0 8336 : 1993 Fibre-cement flat sheets for the purposes of making it easier to compare this Standard with International Standards; to prepare Japanese Industrial Sta
7、ndard conforming with International Standards; and to propose a draft of an International Standard which is based on Japanese Industrial Standard. Attention is drawn to the possibility that some parts of this Standard may conflict with a patent right, application for a patent after opening to the pu
8、blic, utility model right or application for registration of utility model after opening to the public which have technical properties. The relevant Minister and the Japanese Industrial Standards Committee are not responsible for identifying the patent right, application for a patent after opening t
9、o the public, utility model right or application for registration of utility model after opening to the public which have the said technical properties. Date of Establishment: 1995-01-01 Date of Revision: 2004-10-01 Date of Public Notice in Official Gazette: 2004-10-01 Investigated by: Japanese Indu
10、strial Standards Committee Standards Board Technical Committee on Architecture JIS A 5430 : 2004, First English edition published in 2005-05 Translated and published by: Japanese Standards Association 4-1-24, Akasaka, Minato-ku, Tokyo, 107-8440 JAPAN In the event of any doubts arising as to the cont
11、ents, the original JIS is to be the final authority. O JSA 2005 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. Printed in Jap
12、an M A T PROTECTED BY COPYRIGHT Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 22:07:44 MDTNo reproduction or networking permitted without license from IHS -,-,- A 5430 : 2004 Contents Pag
13、e Introduction . 1 2 3 3.1 3.2 4 5 6 7 8 8.1 8.2 9 10 11 12 13 Scope Normative references Definit i on s acceptance test . type test Symbols . Composition Classification and their abbreviations . Quality . Shape, dimension and tolerances . Slate (corrugated sheet) . Slate (flat sheets), calcium sili
14、cate boards and slag gypsum wall boards Tests . Testing methods . Inspection Designation of product . Marking . Annex 1 (informative) Fittings necessary for construction Annex 2 (informative) Comparison table between JIS and corresponding International Standards . 1 1 1 2 2 2 2 3 3 4 8 8 9 12 12 23
15、23 24 25 26 PROTECTED BY COPYRIGHT Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 22:07:44 MDTNo reproduction or networking permitted without license from IHS -,-,- JAPANESE INDUSTRIAL STA
16、NDARD JIS A 5430 : 2004 Fiber reinforced cement boards Introduction This Japanese Industrial Standard has been prepared based on IS0 9933 Products in fibre-reinforced cement-Long corrugated or asymmetrical section sheets and fittings for roofing and cladding published in 1995 as the first edition, a
17、nd IS0 8336 Fibre-cement flat sheets published in 1993 as the first edition with modification of some technical contents. Portions sidelined or underlined with dots are the modified items of original In- ternational Standards. A list of modification with the explanations is given in an- nex 2 (infor
18、mative). 1 Scope This Standard specifies fibre (other than asbestos)-reinforced and formed slate (corrugated sheets and flat sheets), calcium silicate boards and slag gypsum wall boards (hereafter referred to as “fibre reinforced cement boards”). Remarks : The International Standards corresponding t
19、o this Standard are as follows. In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standards and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) ac- cording to ISO/IEC Guide 21. IS0 9933 : 1995 Products in fibre-reinfor
20、ced cement-Long corrugated or asymmetrical section sheets and fittings for roof- ing and cladding (MOD) IS0 8336 : 1993 Fibre-cement flat sheets (MOD) 2 Normative references The following standards contain provisions which, through reference in this Standard, constitute provisions of this Standard.
21、The most recent editions of the standards (including amendments) indicated below shall be applied. Testing method for incombustibility of internal finish material and procedure of buildings JIS A 1408 Test methods of bending and impact for building boards JIS A 1412-1 Test method for thermal resista
22、nce and related properties of ther- mal insulations-Part 1 : Guarded hot plate apparatus JIS A 1412-2 Test method for thermal resistance and related properties of ther- mal insulations-Part 2 : Heat flow meter apparatus JIS A 1435 Test methods for frost resistance of exterior wall materials of build
23、- ings (Freezing and thawing method) JIS A 9510 Inorganic porous thermal insulation materials JIS B 7512 Steel tape measures JIS B 7516 Metal rules JIS K 1464 Desiccants, activated for industrial dehumidification JIS K 8123 Calcium chloride JIS A 1321 PROTECTED BY COPYRIGHT Copyright Japanese Standa
24、rds Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 22:07:44 MDTNo reproduction or networking permitted without license from IHS -,-,- 2 A 5430 : 2004 3 Definitions For the purpose of this Standard, the following defin
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- JIS 5430 2004 ENG
链接地址:https://www.31doc.com/p-3781242.html