ISO-8116-5-1995.pdf
《ISO-8116-5-1995.pdf》由会员分享,可在线阅读,更多相关《ISO-8116-5-1995.pdf(12页珍藏版)》请在三一文库上搜索。
1、INTERNATIONAL STANDARD ISO 8116-5 Second edition 1995-09-15 Textile machinery and accessories - Beams for winding - Part 5: Sectional beams for Warp knitting machines Mathe/ pour I industrie textile - Ensouples pour enroulement - Partie 5: Ensouples sectionnelles pour m b) nature of material to be w
2、ound; c) fabrication process of flanges (casting or forging); d) surface quality and, if possible, treatment (paint, chromium-plating or nickelling etc.) of the beam in contact with the material to be wound (inner sides of the flanges and the outside barrel diameter); e) number of grooves (one or tw
3、o) to be included in the boss of each flange. 8 Designation The designation of a sectional beam in accordance with this part of ISO 8116 shall include the following infor- mation in the Order given: d “Sectional beam”; b) reference to this part of ISO 8116, i.e. ISO 8116-5; d the flange diameter, d,
4、 in millimetres; d) the Overall length, Z2, in millimetres; EXAMPLE A sectional beam with flange diameter d, of 535 mm and Overall length Z2 of 1 065 mm shall be designated as follows: Sectional beam ISO 8116-5 - 535 x 1065 Copyright International Organization for Standardization Provided by IHS und
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ISO 8116 1995
链接地址:https://www.31doc.com/p-3781478.html