JIS-B-0031-2003-ENG.pdf
《JIS-B-0031-2003-ENG.pdf》由会员分享,可在线阅读,更多相关《JIS-B-0031-2003-ENG.pdf(55页珍藏版)》请在三一文库上搜索。
1、J IS JAPANESE I N DUSTR IAL STANDARD Translated and Published by Japanese Standards Association Geometrical Product Specifications (GPS)-Indication of surface texture in technical product documentation ICs 01.100.20; 17.040.20 Reference number : JIS B 0031 : 2003 (E) PROTECTED BY COPYRIGHT 28 S Copy
2、right Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 20:58:47 MDTNo reproduction or networking permitted without license from IHS -,-,- B 0031 : 2003 (IS0 1302 : 2002) Foreword This translation has
3、been made based on the original Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee? as the result of proposal for revision of Japanese Industrial Standard submitted by Japanese Standards Association
4、 (JSA) with the draft being attached, based on the provision of Article 12 Clause 1 of the Industrial Standard- ization Law applicable to the case of revision by the provision of Article 14. Consequently JIS B 0031 : 1994 is replaced with this Standard. This revision is made along with the revision
5、of IS0 1302 which is the corresponding International Standard. Attention is drawn to the possibility that some parts of this Standard may conflict with a patent right, application for a patent after opening to the public, utility model right or application for registration of utility model after ope
6、ning to the public which have technical properties. The relevant Minister and the Japanese Industrial Standards Committee are not responsible for identifying the patent right, application for a patent after opening to the public, utility model right or application for registration of utility model a
7、fter opening to the public which have the said technical properties. Date of Establishment: 1982-06-15 Date of Revision: 2003-09-20 Date of Public Notice in Official Gazette: 2003-09-22 Investigated by: Japanese Industrial Standards Committee Standards Board Technical Committee on Machine Elements J
8、IS B 0031 : 2003, First English edition published in 2004-04 Translated and published by: Japanese Standards Association 4-1 -24, Akasaka, Minato-ku, Tokyo, 107-8440 JAPAN In the event of any doubts arising as to the contents, the original JIS is to be the final authority. O JSA 2004 All rights rese
9、rved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. Printed in Japan PROTECTED BY COPYRIGHT Copyright Japanese Standa
10、rds Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 20:58:47 MDTNo reproduction or networking permitted without license from IHS -,-,- B 0031 : 2003 (IS0 1302 2002) Contents Page 1 1 2 4 5 5 5 5 6 6 7 7 7 8 8 9 9 10 11
11、 13 14 14 17 17 18 18 18 Introduction 1 2 3 4 4.1 4.2 4.3 4.4 4.5 5 5.1 5.2 6 6.1 6.2 6.3 6.4 6.5 6.6 7 8 9 10 11 Scope Normative references Terms and definitions . Graphical symbols for the indication of surface texture Basic graphical symbol Expanded graphical symbols Complete graphical symbol . G
12、eneral Graphical symbol for “all surfaces around a workpiece outline” Composition of complete graphical symbol for surface texture Position of complementary surface texture requirements . General Indication of surface texture parameters . General Indication of parameter designations . Indication of
13、evaluation length, In Indication of tolerance limits . Indication of transmission band and sampling length . Tolerance types-Unilateral or bilateral Indication of manufacturing method or related information Indication of the surface lay Indication of machining allowance Summarizing of indications of
14、 surface texture requirements and their values . Position on drawings and other technical product documentation 11.1 General 11.2 Position and orientation of graphical symbol and its annotation PROTECTED BY COPYRIGHT Copyright Japanese Standards Association Provided by IHS under license with JSALice
15、nsee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/12/2007 20:58:47 MDTNo reproduction or networking permitted without license from IHS -,-,- B 0031 : 2003 (IS0 1302 : 2002) 11.3 Simplified drawing indications of surface texture requirements 20 11.4 Indication of two or more manufac
16、turing methods . 22 Annex A (normative) Annex B (informative) Annex C (informative) Annex D (informative) Annex E (informative) Annex F (informative) Annex G (informative) Annex H (informative) Annex I (informative) Annex J (informative) Proportions and dimensions of graphical symbols Synoptive tabl
17、es requirements . Minimum indications for unambiguous control of surface functions . Surface texture parameter designations . Evaluation length, In . Examples of indication of surface texture Transmission band and sampling length Consequences of new surface texture standards . Former practice . Rela
18、tion to the GPS matrix model . 23 25 28 32 35 38 39 41 43 46 Bibliography . 48 Annex 1 (informative) Preferred number series of respective parameters 49 (ii) PROTECTED BY COPYRIGHT Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=
19、Wing, Bernie Not for Resale, 03/12/2007 20:58:47 MDTNo reproduction or networking permitted without license from IHS -,-,- JAPANESE INDUSTRIAIL STANDARD JIS B 0031 : 2003 (IS0 1302 : 2002) Geometrical Product Specifications (GPS)-Indication of surface texture in technical product documentation Intro
20、duction This Japanese Industrial Standard has been prepared based on the forth edition of IS0 1302 Geometrical Product Specifications (GPS)-Indication of surface texture in technical product documentation published in 2002 without modi- fying the technical contents. This Standard is a geometrical pr
21、oduct specification (GPS) standard and is to be regarded as a general GPS standard (see TR B 0007). It influences link 1 of the chain of standards on roughness, waviness and primary profile. For more detailed information of the relation of this Standard to other standards and the GPS matrix model, s
22、ee annex J. This edition of JIS B 0031 has been developed for use together with the new editions of the surface texture standards issued in 1996 and 1997, which introduce many radical changes compared with the content of the former surface texture stan- dards issued in the 1980s. The changes are so
23、radical that the drawing indications in some instances have a completely new interpretation. Annex H gives detailed in- formation on these changes. Drawing indications applied on technical drawings according to former editions of this Standard refer to the rules given in the surface texture standard
24、s issued at the time of issue and can only be interpreted according to those surface texture stan- dards. Annex I provides information on former practices. The drawing indications given in this edition are to be used for the unambiguous reference to the new surface texture standards issued in 1996 a
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- JIS 0031 2003 ENG
链接地址:https://www.31doc.com/p-3782561.html