JIS-B-1199-2-2001-R2005-ENG.pdf
《JIS-B-1199-2-2001-R2005-ENG.pdf》由会员分享,可在线阅读,更多相关《JIS-B-1199-2-2001-R2005-ENG.pdf(18页珍藏版)》请在三一文库上搜索。
1、J IS JAPANESE I NDUSTRIAL STANDARD Translated and Published by Japanese Standards Association Prevailing torque type nuts- Part 2 : All-metal hexagon nuts ICs 21.060.20 Descriptors : hexagonal nuts Reference number : JIS B 1199-2 : 2001 (E) 10 s PROTECTED BY COPYRIGHT Copyright Japanese Standards As
2、sociation Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/15/2007 00:16:58 MDTNo reproduction or networking permitted without license from IHS -,-,- B 1199-2 2001 Foreword This translation has been made based on the original Japanese Indu
3、strial Standard established by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee according to the proposal of establishing a Japanese Industrial Standard from The Japan Research Institute for Screw Threads and Fasteners (JFRI)/the Japane
4、se Standards Association (JSA), with a draft of Industrial Standard based on the provision of Article 12 Clause 1 of the Industrial Standardization Law. This Standard employs IS0 7042 : 1997 Prevailing torque type all-metal hexagon nuts, style 2-Property classes 5, 8, 10 and 12, IS0 7719 : 1997 Prev
5、ailing torque type all-metal hexagon nuts, style 1-Property classes 5, 8 and 10, IS0 7720 : 1997 Preuailing torque type all-metal hexagon nuts style 2-Property class 9 and IS0 10513 : 1997 Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread-Property classes 8, 10 an
6、d 12 as a basis for the purpose of conforming Japanese Industrial Standards to International Standards. This Standard group consists of the following four parts with a title of Prevailing torque type nuts. Part 1 : Hexagon nuts with non-metallic insert Part 2 : All-metal hexagon nuts Part 3 : Hexago
7、n nuts with flange with non-metallic insert Part 4 : All-metal hexagon nuts with flange Date of Establishment: 2001-01-20 Date of Public Notice in Official Gazette: 2001-01-22 Investigated by: Japanese Industrial Standards Committee Divisional Council on Machine Elements JIS B 1199-2: 2001, First En
8、glish edition published in 2002-07 Translated and published by: Japanese Standards Association 4-1-24, Akasaka, Minato-ku, Tokyo, 107-8440 JAPAN In the event of any doubts arising as to the contents, the original JIS is to be the final authority. O JSA 2002 All rights reserved. Unless otherwise spec
9、ified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. Printed in Japan PROTECTED BY COPYRIGHT Copyright Japanese Standards Association Provided by
10、 IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/15/2007 00:16:58 MDTNo reproduction or networking permitted without license from IHS -,-,- JAPANESE INDUSTRIAL STANDARD JIS B 1199-2 : 2001 Prevailing torque type nuts- Part 2 : All-metal hexagon nuts
11、Introduction This Japanese Industrial Standard has been prepared based on IS0 7042 Prevailing torque type all-metal hexagon nuts, style 2-Property classes 5, 8, 10 and 12, IS0 7719 Prevailing torque type all-metal hexagon nuts, style 1-Prop- erty classes 5, 8 and 10 and IS0 7720 Prevailing torque ty
12、pe all-metal hexagon nuts style 2-Property class 9 published in 1997 as second editions, and IS0 10513 Pre- vailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread- Property classes 8, 10 and 12 published in 1997 as the first edition, without modifying the corresponding pa
13、rts (shape, dimensions, and specification and designation of products) being compiled and integrated. In addition, JIS B 1199 specifying prevailing torque type nut products consists of four parts. The relation between each part and the International Standards cor- responding thereto is shown in Anne
14、x 1 (informative). 1 Scope This Standard specifies the characteristics of prevailing torque type all- metal hexagon nuts for general use. If other specifications are required, they should be selected from existing stan- dards, for example JIS B 0205, JIS B 0207, JIS B 0209, JIS 3 0211 and JIS B 1056
15、. The International Standards corresponding to this Standard are as follows. In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) ac- cording to ISO/IEC Guide 2
16、1. IS0 7042 : 1997 Prevailing torque type all-metal hexagon nuts, style 2- Property classes 5, 8, 10 and 12 (MOD) IS0 7719 : 1997 Prevailing torque type all-metal hexagon nuts, style 1- Property classes 5, 8 and 10 (MOD) IS0 7720 : 1997 Prevailing torque type all-metal hexagon nuts style 2- Property
17、 class 9 (MOD) IS0 10513 : 1997 Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread-Property classes 8, 10 and 12 (MOD) Remarks: 2 Normative references The following standards contain provisions which, through reference in this Standard, constitute provisions of thi
18、s Standard. If the indication of the year of coming into effect is given to these referred standards, only the edi- tion of indicated year constitutes the provision of this Standard but the revision and amendment made thereafter are not applied. The normative references without the indication of the
19、 year of coming into effect apply limiting only t o the most recent edition (including amendments). PROTECTED BY COPYRIGHT Copyright Japanese Standards Association Provided by IHS under license with JSALicensee=IHS Employees/1111111001, User=Wing, Bernie Not for Resale, 03/15/2007 00:16:58 MDTNo rep
20、roduction or networking permitted without license from IHS -,-,- 2 B 1199-2 2001 JIS B 0143 Symbols and designations of dimensions for threaded fasteners Remarks : The items cited from IS0 225 : 1983 Fasteners-Bolts, screws, studs and nuts-Symbols and designations of dimensions are equivalent to the
21、 corresponding matters of the said standard. JIS B 0205 : 1997 Metric coarse screw threads Remarks : The items cited from IS0 68 : 1973 IS0 general purpose screw threads-Basic profile are equivalent to the corresponding matters of the said standard. The items cited from IS0 261 : 1973 IS0 general-pu
22、rpose metric screw threads-General plan are equivalent to the corresponding matters of the said standard. The items cited from IS0 724 : 1993 IS0 general-purpose metric screw threads-Basic dimensions are equivalent to the correspond- ing matters of the said standard. JIS B 0207 : 1982 Metric fine sc
23、rew threads Remarks : The items cited from IS0 68 : 1973 IS0 general purpose screw threads-Basic profile are equivalent to the corresponding matters of the said standard. The items cited from IS0 261 : 1973 IS0 general-purpose metric screw threads-General plan are equivalent to the corresponding mat
24、ters of the said standard. The items cited from IS0 262 : 1973 IS0 general-purpose metric screw threads-Selected sizes for screws, bolts and nuts are equiva- lent to the corresponding matters of the said standard. The items cited from IS0 724 : 1993 IS0 general-purpose metric screw threads-Basic dim
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- JIS 1199 2001 R2005 ENG
链接地址:https://www.31doc.com/p-3782587.html